chore: vendor

vendor/github.com/charmbracelet/x/ansi/c0.go

@@ -0,0 +1,72 @@
+package ansi
+
+// C0 control characters.
+//
+// These range from (0x00-0x1F) as defined in ISO 646 (ASCII).
+// See: https://en.wikipedia.org/wiki/C0_and_C1_control_codes
+const (
+	// NUL is the null character (Caret: ^@, Char: \0).
+	NUL = 0x00
+	// SOH is the start of heading character (Caret: ^A).
+	SOH = 0x01
+	// STX is the start of text character (Caret: ^B).
+	STX = 0x02
+	// ETX is the end of text character (Caret: ^C).
+	ETX = 0x03
+	// EOT is the end of transmission character (Caret: ^D).
+	EOT = 0x04
+	// ENQ is the enquiry character (Caret: ^E).
+	ENQ = 0x05
+	// ACK is the acknowledge character (Caret: ^F).
+	ACK = 0x06
+	// BEL is the bell character (Caret: ^G, Char: \a).
+	BEL = 0x07
+	// BS is the backspace character (Caret: ^H, Char: \b).
+	BS = 0x08
+	// HT is the horizontal tab character (Caret: ^I, Char: \t).
+	HT = 0x09
+	// LF is the line feed character (Caret: ^J, Char: \n).
+	LF = 0x0A
+	// VT is the vertical tab character (Caret: ^K, Char: \v).
+	VT = 0x0B
+	// FF is the form feed character (Caret: ^L, Char: \f).
+	FF = 0x0C
+	// CR is the carriage return character (Caret: ^M, Char: \r).
+	CR = 0x0D
+	// SO is the shift out character (Caret: ^N).
+	SO = 0x0E
+	// SI is the shift in character (Caret: ^O).
+	SI = 0x0F
+	// DLE is the data link escape character (Caret: ^P).
+	DLE = 0x10
+	// DC1 is the device control 1 character (Caret: ^Q).
+	DC1 = 0x11
+	// DC2 is the device control 2 character (Caret: ^R).
+	DC2 = 0x12
+	// DC3 is the device control 3 character (Caret: ^S).
+	DC3 = 0x13
+	// DC4 is the device control 4 character (Caret: ^T).
+	DC4 = 0x14
+	// NAK is the negative acknowledge character (Caret: ^U).
+	NAK = 0x15
+	// SYN is the synchronous idle character (Caret: ^V).
+	SYN = 0x16
+	// ETB is the end of transmission block character (Caret: ^W).
+	ETB = 0x17
+	// CAN is the cancel character (Caret: ^X).
+	CAN = 0x18
+	// EM is the end of medium character (Caret: ^Y).
+	EM = 0x19
+	// SUB is the substitute character (Caret: ^Z).
+	SUB = 0x1A
+	// ESC is the escape character (Caret: ^[, Char: \e).
+	ESC = 0x1B
+	// FS is the file separator character (Caret: ^\).
+	FS = 0x1C
+	// GS is the group separator character (Caret: ^]).
+	GS = 0x1D
+	// RS is the record separator character (Caret: ^^).
+	RS = 0x1E
+	// US is the unit separator character (Caret: ^_).
+	US = 0x1F
+)