p4u1/abra
0
0
Fork 0
forked from toolshed/abra
Code Pull Requests Activity

refactor: urfave v3

Browse Source
This commit is contained in:
decentral1se
2024-07-09 13:57:54 +02:00
parent 375e17a4a0
commit 1f8662cd95
336 changed files with 7332 additions and 25145 deletions
Download Patch File Download Diff File Expand all files Collapse all files

89
vendor/github.com/go-git/gcfg/doc.go generated vendored
View File

@ -4,29 +4,29 @@
// This package is still a work in progress; see the sections below for planned
// changes.
//
// # Syntax
// Syntax
//
// The syntax is based on that used by git config:
// http://git-scm.com/docs/git-config#_syntax .
// There are some (planned) differences compared to the git config format:
// - improve data portability:
// - must be encoded in UTF-8 (for now) and must not contain the 0 byte
// - include and "path" type is not supported
// (path type may be implementable as a user-defined type)
// - internationalization
// - section and variable names can contain unicode letters, unicode digits
// (as defined in http://golang.org/ref/spec#Characters ) and hyphens
// (U+002D), starting with a unicode letter
// - disallow potentially ambiguous or misleading definitions:
// - `[sec.sub]` format is not allowed (deprecated in gitconfig)
// - `[sec ""]` is not allowed
// - use `[sec]` for section name "sec" and empty subsection name
// - (planned) within a single file, definitions must be contiguous for each:
// - section: '[secA]' -> '[secB]' -> '[secA]' is an error
// - subsection: '[sec "A"]' -> '[sec "B"]' -> '[sec "A"]' is an error
// - multivalued variable: 'multi=a' -> 'other=x' -> 'multi=b' is an error
// - improve data portability:
// - must be encoded in UTF-8 (for now) and must not contain the 0 byte
// - include and "path" type is not supported
// (path type may be implementable as a user-defined type)
// - internationalization
// - section and variable names can contain unicode letters, unicode digits
// (as defined in http://golang.org/ref/spec#Characters ) and hyphens
// (U+002D), starting with a unicode letter
// - disallow potentially ambiguous or misleading definitions:
// - `[sec.sub]` format is not allowed (deprecated in gitconfig)
// - `[sec ""]` is not allowed
// - use `[sec]` for section name "sec" and empty subsection name
// - (planned) within a single file, definitions must be contiguous for each:
// - section: '[secA]' -> '[secB]' -> '[secA]' is an error
// - subsection: '[sec "A"]' -> '[sec "B"]' -> '[sec "A"]' is an error
// - multivalued variable: 'multi=a' -> 'other=x' -> 'multi=b' is an error
//
// # Data structure
// Data structure
//
// The functions in this package read values into a user-defined struct.
// Each section corresponds to a struct field in the config struct, and each
@ -56,7 +56,7 @@
// or when a field is not of a suitable type (either a struct or a map with
// string keys and pointer-to-struct values).
//
// # Parsing of values
// Parsing of values
//
// The section structs in the config struct may contain single-valued or
// multi-valued variables. Variables of unnamed slice type (that is, a type
@ -98,17 +98,17 @@
// The types subpackage for provides helpers for parsing "enum-like" and integer
// types.
//
// # Error handling
// Error handling
//
// There are 3 types of errors:
//
// - programmer errors / panics:
// - invalid configuration structure
// - data errors:
// - fatal errors:
// - invalid configuration syntax
// - warnings:
// - data that doesn't belong to any part of the config structure
// - programmer errors / panics:
// - invalid configuration structure
// - data errors:
// - fatal errors:
// - invalid configuration syntax
// - warnings:
// - data that doesn't belong to any part of the config structure
//
// Programmer errors trigger panics. These are should be fixed by the programmer
// before releasing code that uses gcfg.
@ -122,23 +122,24 @@
// filtered out programmatically. To ignore extra data warnings, wrap the
// gcfg.Read*Into invocation into a call to gcfg.FatalOnly.
//
// # TODO
// TODO
//
// The following is a list of changes under consideration:
// - documentation
// - self-contained syntax documentation
// - more practical examples
// - move TODOs to issue tracker (eventually)
// - syntax
// - reconsider valid escape sequences
// (gitconfig doesn't support \r in value, \t in subsection name, etc.)
// - reading / parsing gcfg files
// - define internal representation structure
// - support multiple inputs (readers, strings, files)
// - support declaring encoding (?)
// - support varying fields sets for subsections (?)
// - writing gcfg files
// - error handling
// - make error context accessible programmatically?
// - limit input size?
// - documentation
// - self-contained syntax documentation
// - more practical examples
// - move TODOs to issue tracker (eventually)
// - syntax
// - reconsider valid escape sequences
// (gitconfig doesn't support \r in value, \t in subsection name, etc.)
// - reading / parsing gcfg files
// - define internal representation structure
// - support multiple inputs (readers, strings, files)
// - support declaring encoding (?)
// - support varying fields sets for subsections (?)
// - writing gcfg files
// - error handling
// - make error context accessible programmatically?
// - limit input size?
//
package gcfg // import "github.com/go-git/gcfg"

7
vendor/github.com/go-git/gcfg/errors.go generated vendored
View File

@ -8,9 +8,10 @@ import (
// fatal errors. That is, errors (warnings) indicating data for unknown
// sections / variables is ignored. Example invocation:
//
// err := gcfg.FatalOnly(gcfg.ReadFileInto(&cfg, configFile))
// if err != nil {
// ...
// err := gcfg.FatalOnly(gcfg.ReadFileInto(&cfg, configFile))
// if err != nil {
// ...
//
func FatalOnly(err error) error {
return warnings.FatalOnly(err)
}

4
vendor/github.com/go-git/gcfg/scanner/errors.go generated vendored
View File

@ -18,6 +18,7 @@ import (
// The position Pos, if valid, points to the beginning of
// the offending token, and the error condition is described
// by Msg.
//
type Error struct {
Pos token.Position
Msg string
@ -35,6 +36,7 @@ func (e Error) Error() string {
// ErrorList is a list of *Errors.
// The zero value for an ErrorList is an empty ErrorList ready to use.
//
type ErrorList []*Error
// Add adds an Error with given position and error message to an ErrorList.
@ -64,6 +66,7 @@ func (p ErrorList) Less(i, j int) bool {
// Sort sorts an ErrorList. *Error entries are sorted by position,
// other errors are sorted by error message, and before any *Error
// entry.
//
func (p ErrorList) Sort() {
sort.Sort(p)
}
@ -106,6 +109,7 @@ func (p ErrorList) Err() error {
// PrintError is a utility function that prints a list of errors to w,
// one error per line, if the err parameter is an ErrorList. Otherwise
// it prints the err string.
//
func PrintError(w io.Writer, err error) {
if list, ok := err.(ErrorList); ok {
for _, e := range list {

2
vendor/github.com/go-git/gcfg/set.go generated vendored
View File

@ -216,7 +216,7 @@ func newValue(c *warnings.Collector, sect string, vCfg reflect.Value,
}
func set(c *warnings.Collector, cfg interface{}, sect, sub, name string,
value string, blankValue bool, subsectPass bool) error {
value string, blankValue bool, subsectPass bool) error {
//
vPCfg := reflect.ValueOf(cfg)
if vPCfg.Kind() != reflect.Ptr || vPCfg.Elem().Kind() != reflect.Struct {

17
vendor/github.com/go-git/gcfg/token/position.go generated vendored
View File

@ -18,6 +18,7 @@ import (
// Position describes an arbitrary source position
// including the file, line, and column location.
// A Position is valid if the line number is > 0.
//
type Position struct {
Filename string // filename, if any
Offset int // offset, starting at 0
@ -34,6 +35,7 @@ func (pos *Position) IsValid() bool { return pos.Line > 0 }
// line:column valid position without file name
// file invalid position with file name
// - invalid position without file name
//
func (pos Position) String() string {
s := pos.Filename
if pos.IsValid() {
@ -67,12 +69,14 @@ func (pos Position) String() string {
// equivalent to comparing the respective source file offsets. If p and q
// are in different files, p < q is true if the file implied by p was added
// to the respective file set before the file implied by q.
//
type Pos int
// The zero value for Pos is NoPos; there is no file and line information
// associated with it, and NoPos().IsValid() is false. NoPos is always
// smaller than any other Pos value. The corresponding Position value
// for NoPos is the zero value for Position.
//
const NoPos Pos = 0
// IsValid returns true if the position is valid.
@ -85,6 +89,7 @@ func (p Pos) IsValid() bool {
// A File is a handle for a file belonging to a FileSet.
// A File has a name, size, and line offset table.
//
type File struct {
set *FileSet
name string // file name as provided to AddFile
@ -122,6 +127,7 @@ func (f *File) LineCount() int {
// AddLine adds the line offset for a new line.
// The line offset must be larger than the offset for the previous line
// and smaller than the file size; otherwise the line offset is ignored.
//
func (f *File) AddLine(offset int) {
f.set.mutex.Lock()
if i := len(f.lines); (i == 0 || f.lines[i-1] < offset) && offset < f.size {
@ -137,6 +143,7 @@ func (f *File) AddLine(offset int) {
// Each line offset must be larger than the offset for the previous line
// and smaller than the file size; otherwise SetLines fails and returns
// false.
//
func (f *File) SetLines(lines []int) bool {
// verify validity of lines table
size := f.size
@ -190,6 +197,7 @@ type lineInfo struct {
//
// AddLineInfo is typically used to register alternative position
// information for //line filename:line comments in source files.
//
func (f *File) AddLineInfo(offset int, filename string, line int) {
f.set.mutex.Lock()
if i := len(f.infos); i == 0 || f.infos[i-1].Offset < offset && offset < f.size {
@ -201,6 +209,7 @@ func (f *File) AddLineInfo(offset int, filename string, line int) {
// Pos returns the Pos value for the given file offset;
// the offset must be <= f.Size().
// f.Pos(f.Offset(p)) == p.
//
func (f *File) Pos(offset int) Pos {
if offset > f.size {
panic("illegal file offset")
@ -211,6 +220,7 @@ func (f *File) Pos(offset int) Pos {
// Offset returns the offset for the given file position p;
// p must be a valid Pos value in that file.
// f.Offset(f.Pos(offset)) == offset.
//
func (f *File) Offset(p Pos) int {
if int(p) < f.base || int(p) > f.base+f.size {
panic("illegal Pos value")
@ -220,6 +230,7 @@ func (f *File) Offset(p Pos) int {
// Line returns the line number for the given file position p;
// p must be a Pos value in that file or NoPos.
//
func (f *File) Line(p Pos) int {
// TODO(gri) this can be implemented much more efficiently
return f.Position(p).Line
@ -257,6 +268,7 @@ func (f *File) position(p Pos) (pos Position) {
// Position returns the Position value for the given file position p;
// p must be a Pos value in that file or NoPos.
//
func (f *File) Position(p Pos) (pos Position) {
if p != NoPos {
if int(p) < f.base || int(p) > f.base+f.size {
@ -273,6 +285,7 @@ func (f *File) Position(p Pos) (pos Position) {
// A FileSet represents a set of source files.
// Methods of file sets are synchronized; multiple goroutines
// may invoke them concurrently.
//
type FileSet struct {
mutex sync.RWMutex // protects the file set
base int // base offset for the next file
@ -289,6 +302,7 @@ func NewFileSet() *FileSet {
// Base returns the minimum base offset that must be provided to
// AddFile when adding the next file.
//
func (s *FileSet) Base() int {
s.mutex.RLock()
b := s.base
@ -311,6 +325,7 @@ func (s *FileSet) Base() int {
// with offs in the range [0, size] and thus p in the range [base, base+size].
// For convenience, File.Pos may be used to create file-specific position
// values from a file offset.
//
func (s *FileSet) AddFile(filename string, base, size int) *File {
s.mutex.Lock()
defer s.mutex.Unlock()
@ -332,6 +347,7 @@ func (s *FileSet) AddFile(filename string, base, size int) *File {
// Iterate calls f for the files in the file set in the order they were added
// until f returns false.
//
func (s *FileSet) Iterate(f func(*File) bool) {
for i := 0; ; i++ {
var file *File
@ -370,6 +386,7 @@ func (s *FileSet) file(p Pos) *File {
// File returns the file that contains the position p.
// If no such file is found (for instance for p == NoPos),
// the result is nil.
//
func (s *FileSet) File(p Pos) (f *File) {
if p != NoPos {
s.mutex.RLock()

4
vendor/github.com/go-git/gcfg/token/token.go generated vendored
View File

@ -7,6 +7,7 @@
//
// Note that the API for the token package may change to accommodate new
// features or implementation changes in gcfg.
//
package token
import "strconv"
@ -57,6 +58,7 @@ var tokens = [...]string{
// sequence (e.g., for the token ASSIGN, the string is "="). For all other
// tokens the string corresponds to the token constant name (e.g. for the
// token IDENT, the string is "IDENT").
//
func (tok Token) String() string {
s := ""
if 0 <= tok && tok < Token(len(tokens)) {
@ -72,8 +74,10 @@ func (tok Token) String() string {
// IsLiteral returns true for tokens corresponding to identifiers
// and basic type literals; it returns false otherwise.
//
func (tok Token) IsLiteral() bool { return literal_beg < tok && tok < literal_end }
// IsOperator returns true for tokens corresponding to operators and
// delimiters; it returns false otherwise.
//
func (tok Token) IsOperator() bool { return operator_beg < tok && tok < operator_end }

2
vendor/github.com/go-git/go-billy/v5/memfs/memory.go generated vendored
View File

@ -25,7 +25,7 @@ type Memory struct {
tempCount int
}
// New returns a new Memory filesystem.
//New returns a new Memory filesystem.
func New() billy.Filesystem {
fs := &Memory{s: newStorage()}
return chroot.New(fs, string(separator))

8
vendor/github.com/go-git/go-billy/v5/util/walk.go generated vendored
View File

@ -46,7 +46,7 @@ func walk(fs billy.Filesystem, path string, info os.FileInfo, walkFn filepath.Wa
return nil
}
// Walk walks the file tree rooted at root, calling fn for each file or
// Walk walks the file tree rooted at root, calling fn for each file or
// directory in the tree, including root. All errors that arise visiting files
// and directories are filtered by fn: see the WalkFunc documentation for
// details.
@ -54,7 +54,7 @@ func walk(fs billy.Filesystem, path string, info os.FileInfo, walkFn filepath.Wa
// The files are walked in lexical order, which makes the output deterministic
// but requires Walk to read an entire directory into memory before proceeding
// to walk that directory. Walk does not follow symbolic links.
//
//
// Function adapted from https://github.com/golang/go/blob/3b770f2ccb1fa6fecc22ea822a19447b10b70c5c/src/path/filepath/path.go#L500
func Walk(fs billy.Filesystem, root string, walkFn filepath.WalkFunc) error {
info, err := fs.Lstat(root)
@ -63,10 +63,10 @@ func Walk(fs billy.Filesystem, root string, walkFn filepath.WalkFunc) error {
} else {
err = walk(fs, root, info, walkFn)
}
if err == filepath.SkipDir {
return nil
}
return err
}

189
vendor/github.com/go-git/go-git/v5/plumbing/format/config/doc.go generated vendored
View File

@ -1,121 +1,122 @@
// Package config implements encoding and decoding of git config files.
//
// Configuration File
// ------------------
// Configuration File
// ------------------
//
// The Git configuration file contains a number of variables that affect
// the Git commands' behavior. The `.git/config` file in each repository
// is used to store the configuration for that repository, and
// `$HOME/.gitconfig` is used to store a per-user configuration as
// fallback values for the `.git/config` file. The file `/etc/gitconfig`
// can be used to store a system-wide default configuration.
// The Git configuration file contains a number of variables that affect
// the Git commands' behavior. The `.git/config` file in each repository
// is used to store the configuration for that repository, and
// `$HOME/.gitconfig` is used to store a per-user configuration as
// fallback values for the `.git/config` file. The file `/etc/gitconfig`
// can be used to store a system-wide default configuration.
//
// The configuration variables are used by both the Git plumbing
// and the porcelains. The variables are divided into sections, wherein
// the fully qualified variable name of the variable itself is the last
// dot-separated segment and the section name is everything before the last
// dot. The variable names are case-insensitive, allow only alphanumeric
// characters and `-`, and must start with an alphabetic character. Some
// variables may appear multiple times; we say then that the variable is
// multivalued.
// The configuration variables are used by both the Git plumbing
// and the porcelains. The variables are divided into sections, wherein
// the fully qualified variable name of the variable itself is the last
// dot-separated segment and the section name is everything before the last
// dot. The variable names are case-insensitive, allow only alphanumeric
// characters and `-`, and must start with an alphabetic character. Some
// variables may appear multiple times; we say then that the variable is
// multivalued.
//
// Syntax
// ~~~~~~
// Syntax
// ~~~~~~
//
// The syntax is fairly flexible and permissive; whitespaces are mostly
// ignored. The '#' and ';' characters begin comments to the end of line,
// blank lines are ignored.
// The syntax is fairly flexible and permissive; whitespaces are mostly
// ignored. The '#' and ';' characters begin comments to the end of line,
// blank lines are ignored.
//
// The file consists of sections and variables. A section begins with
// the name of the section in square brackets and continues until the next
// section begins. Section names are case-insensitive. Only alphanumeric
// characters, `-` and `.` are allowed in section names. Each variable
// must belong to some section, which means that there must be a section
// header before the first setting of a variable.
// The file consists of sections and variables. A section begins with
// the name of the section in square brackets and continues until the next
// section begins. Section names are case-insensitive. Only alphanumeric
// characters, `-` and `.` are allowed in section names. Each variable
// must belong to some section, which means that there must be a section
// header before the first setting of a variable.
//
// Sections can be further divided into subsections. To begin a subsection
// put its name in double quotes, separated by space from the section name,
// in the section header, like in the example below:
// Sections can be further divided into subsections. To begin a subsection
// put its name in double quotes, separated by space from the section name,
// in the section header, like in the example below:
//
// --------
// [section "subsection"]
// --------
// [section "subsection"]
//
// --------
// --------
//
// Subsection names are case sensitive and can contain any characters except
// newline (doublequote `"` and backslash can be included by escaping them
// as `\"` and `\\`, respectively). Section headers cannot span multiple
// lines. Variables may belong directly to a section or to a given subsection.
// You can have `[section]` if you have `[section "subsection"]`, but you
// don't need to.
// Subsection names are case sensitive and can contain any characters except
// newline (doublequote `"` and backslash can be included by escaping them
// as `\"` and `\\`, respectively). Section headers cannot span multiple
// lines. Variables may belong directly to a section or to a given subsection.
// You can have `[section]` if you have `[section "subsection"]`, but you
// don't need to.
//
// There is also a deprecated `[section.subsection]` syntax. With this
// syntax, the subsection name is converted to lower-case and is also
// compared case sensitively. These subsection names follow the same
// restrictions as section names.
// There is also a deprecated `[section.subsection]` syntax. With this
// syntax, the subsection name is converted to lower-case and is also
// compared case sensitively. These subsection names follow the same
// restrictions as section names.
//
// All the other lines (and the remainder of the line after the section
// header) are recognized as setting variables, in the form
// 'name = value' (or just 'name', which is a short-hand to say that
// the variable is the boolean "true").
// The variable names are case-insensitive, allow only alphanumeric characters
// and `-`, and must start with an alphabetic character.
// All the other lines (and the remainder of the line after the section
// header) are recognized as setting variables, in the form
// 'name = value' (or just 'name', which is a short-hand to say that
// the variable is the boolean "true").
// The variable names are case-insensitive, allow only alphanumeric characters
// and `-`, and must start with an alphabetic character.
//
// A line that defines a value can be continued to the next line by
// ending it with a `\`; the backquote and the end-of-line are
// stripped. Leading whitespaces after 'name =', the remainder of the
// line after the first comment character '#' or ';', and trailing
// whitespaces of the line are discarded unless they are enclosed in
// double quotes. Internal whitespaces within the value are retained
// verbatim.
// A line that defines a value can be continued to the next line by
// ending it with a `\`; the backquote and the end-of-line are
// stripped. Leading whitespaces after 'name =', the remainder of the
// line after the first comment character '#' or ';', and trailing
// whitespaces of the line are discarded unless they are enclosed in
// double quotes. Internal whitespaces within the value are retained
// verbatim.
//
// Inside double quotes, double quote `"` and backslash `\` characters
// must be escaped: use `\"` for `"` and `\\` for `\`.
// Inside double quotes, double quote `"` and backslash `\` characters
// must be escaped: use `\"` for `"` and `\\` for `\`.
//
// The following escape sequences (beside `\"` and `\\`) are recognized:
// `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
// and `\b` for backspace (BS). Other char escape sequences (including octal
// escape sequences) are invalid.
// The following escape sequences (beside `\"` and `\\`) are recognized:
// `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
// and `\b` for backspace (BS). Other char escape sequences (including octal
// escape sequences) are invalid.
//
// Includes
// ~~~~~~~~
// Includes
// ~~~~~~~~
//
// You can include one config file from another by setting the special
// `include.path` variable to the name of the file to be included. The
// variable takes a pathname as its value, and is subject to tilde
// expansion.
// You can include one config file from another by setting the special
// `include.path` variable to the name of the file to be included. The
// variable takes a pathname as its value, and is subject to tilde
// expansion.
//
// The included file is expanded immediately, as if its contents had been
// found at the location of the include directive. If the value of the
// `include.path` variable is a relative path, the path is considered to be
// relative to the configuration file in which the include directive was
// found. See below for examples.
// The included file is expanded immediately, as if its contents had been
// found at the location of the include directive. If the value of the
// `include.path` variable is a relative path, the path is considered to be
// relative to the configuration file in which the include directive was
// found. See below for examples.
//
//
// Example
// ~~~~~~~
// Example
// ~~~~~~~
//
// # Core variables
// [core]
// ; Don't trust file modes
// filemode = false
// # Core variables
// [core]
// ; Don't trust file modes
// filemode = false
//
// # Our diff algorithm
// [diff]
// external = /usr/local/bin/diff-wrapper
// renames = true
// # Our diff algorithm
// [diff]
// external = /usr/local/bin/diff-wrapper
// renames = true
//
// [branch "devel"]
// remote = origin
// merge = refs/heads/devel
// [branch "devel"]
// remote = origin
// merge = refs/heads/devel
//
// # Proxy settings
// [core]
// gitProxy="ssh" for "kernel.org"
// gitProxy=default-proxy ; for the rest
// # Proxy settings
// [core]
// gitProxy="ssh" for "kernel.org"
// gitProxy=default-proxy ; for the rest
//
// [include]
// path = /path/to/foo.inc ; include by absolute path
// path = foo ; expand "foo" relative to the current file
// path = ~/foo ; expand "foo" in your `$HOME` directory
//
// [include]
// path = /path/to/foo.inc ; include by absolute path
// path = foo ; expand "foo" relative to the current file
// path = ~/foo ; expand "foo" in your `$HOME` directory
package config

5
vendor/github.com/go-git/go-git/v5/plumbing/format/config/encoder.go generated vendored
View File

@ -13,9 +13,8 @@ type Encoder struct {
var (
subsectionReplacer = strings.NewReplacer(`"`, `\"`, `\`, `\\`)
valueReplacer = strings.NewReplacer(`"`, `\"`, `\`, `\\`, "\n", `\n`, "\t", `\t`, "\b", `\b`)
valueReplacer = strings.NewReplacer(`"`, `\"`, `\`, `\\`, "\n", `\n`, "\t", `\t`, "\b", `\b`)
)
// NewEncoder returns a new encoder that writes to w.
func NewEncoder(w io.Writer) *Encoder {
return &Encoder{w}
@ -64,7 +63,7 @@ func (e *Encoder) encodeOptions(opts Options) error {
for _, o := range opts {
var value string
if strings.ContainsAny(o.Value, "#;\"\t\n\\") || strings.HasPrefix(o.Value, " ") || strings.HasSuffix(o.Value, " ") {
value = `"` + valueReplacer.Replace(o.Value) + `"`
value = `"`+valueReplacer.Replace(o.Value)+`"`
} else {
value = o.Value
}

2
vendor/github.com/go-git/go-git/v5/plumbing/format/config/option.go generated vendored
View File

@ -34,7 +34,7 @@ func (opts Options) GoString() string {
// Get gets the value for the given key if set,
// otherwise it returns the empty string.
//
// # Note that there is no difference
// Note that there is no difference
//
// This matches git behaviour since git v1.8.1-rc1,
// if there are multiple definitions of a key, the

13
vendor/github.com/go-git/go-git/v5/plumbing/format/config/section.go generated vendored
View File

@ -12,7 +12,7 @@ import (
// put its name in double quotes, separated by space from the section name,
// in the section header, like in the example below:
//
// [section "subsection"]
// [section "subsection"]
//
// All the other lines (and the remainder of the line after the section header)
// are recognized as option variables, in the form "name = value" (or just name,
@ -20,11 +20,12 @@ import (
// The variable names are case-insensitive, allow only alphanumeric characters
// and -, and must start with an alphabetic character:
//
// [section "subsection1"]
// option1 = value1
// option2
// [section "subsection2"]
// option3 = value2
// [section "subsection1"]
// option1 = value1
// option2
// [section "subsection2"]
// option3 = value2
//
type Section struct {
Name string
Options Options

96
vendor/github.com/go-git/go-git/v5/plumbing/format/gitignore/doc.go generated vendored
View File

@ -3,68 +3,68 @@
// priorities. It support all pattern formats as specified in the original gitignore
// documentation, copied below:
//
// Pattern format
// ==============
// Pattern format
// ==============
//
// - A blank line matches no files, so it can serve as a separator for readability.
// - A blank line matches no files, so it can serve as a separator for readability.
//
// - A line starting with # serves as a comment. Put a backslash ("\") in front of
// the first hash for patterns that begin with a hash.
// - A line starting with # serves as a comment. Put a backslash ("\") in front of
// the first hash for patterns that begin with a hash.
//
// - Trailing spaces are ignored unless they are quoted with backslash ("\").
// - Trailing spaces are ignored unless they are quoted with backslash ("\").
//
// - An optional prefix "!" which negates the pattern; any matching file excluded
// by a previous pattern will become included again. It is not possible to
// re-include a file if a parent directory of that file is excluded.
// Git doesn’t list excluded directories for performance reasons, so
// any patterns on contained files have no effect, no matter where they are
// defined. Put a backslash ("\") in front of the first "!" for patterns
// that begin with a literal "!", for example, "\!important!.txt".
// - An optional prefix "!" which negates the pattern; any matching file excluded
// by a previous pattern will become included again. It is not possible to
// re-include a file if a parent directory of that file is excluded.
// Git doesn’t list excluded directories for performance reasons, so
// any patterns on contained files have no effect, no matter where they are
// defined. Put a backslash ("\") in front of the first "!" for patterns
// that begin with a literal "!", for example, "\!important!.txt".
//
// - If the pattern ends with a slash, it is removed for the purpose of the
// following description, but it would only find a match with a directory.
// In other words, foo/ will match a directory foo and paths underneath it,
// but will not match a regular file or a symbolic link foo (this is consistent
// with the way how pathspec works in general in Git).
// - If the pattern ends with a slash, it is removed for the purpose of the
// following description, but it would only find a match with a directory.
// In other words, foo/ will match a directory foo and paths underneath it,
// but will not match a regular file or a symbolic link foo (this is consistent
// with the way how pathspec works in general in Git).
//
// - If the pattern does not contain a slash /, Git treats it as a shell glob
// pattern and checks for a match against the pathname relative to the location
// of the .gitignore file (relative to the toplevel of the work tree if not
// from a .gitignore file).
// - If the pattern does not contain a slash /, Git treats it as a shell glob
// pattern and checks for a match against the pathname relative to the location
// of the .gitignore file (relative to the toplevel of the work tree if not
// from a .gitignore file).
//
// - Otherwise, Git treats the pattern as a shell glob suitable for consumption
// by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will
// not match a / in the pathname. For example, "Documentation/*.html" matches
// "Documentation/git.html" but not "Documentation/ppc/ppc.html" or
// "tools/perf/Documentation/perf.html".
// - Otherwise, Git treats the pattern as a shell glob suitable for consumption
// by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will
// not match a / in the pathname. For example, "Documentation/*.html" matches
// "Documentation/git.html" but not "Documentation/ppc/ppc.html" or
// "tools/perf/Documentation/perf.html".
//
// - A leading slash matches the beginning of the pathname. For example,
// "/*.c" matches "cat-file.c" but not "mozilla-sha1/sha1.c".
// - A leading slash matches the beginning of the pathname. For example,
// "/*.c" matches "cat-file.c" but not "mozilla-sha1/sha1.c".
//
// Two consecutive asterisks ("**") in patterns matched against full pathname
// may have special meaning:
// Two consecutive asterisks ("**") in patterns matched against full pathname
// may have special meaning:
//
// - A leading "**" followed by a slash means match in all directories.
// For example, "**/foo" matches file or directory "foo" anywhere, the same as
// pattern "foo". "**/foo/bar" matches file or directory "bar"
// anywhere that is directly under directory "foo".
// - A leading "**" followed by a slash means match in all directories.
// For example, "**/foo" matches file or directory "foo" anywhere, the same as
// pattern "foo". "**/foo/bar" matches file or directory "bar"
// anywhere that is directly under directory "foo".
//
// - A trailing "/**" matches everything inside. For example, "abc/**" matches
// all files inside directory "abc", relative to the location of the
// .gitignore file, with infinite depth.
// - A trailing "/**" matches everything inside. For example, "abc/**" matches
// all files inside directory "abc", relative to the location of the
// .gitignore file, with infinite depth.
//
// - A slash followed by two consecutive asterisks then a slash matches
// zero or more directories. For example, "a/**/b" matches "a/b", "a/x/b",
// "a/x/y/b" and so on.
// - A slash followed by two consecutive asterisks then a slash matches
// zero or more directories. For example, "a/**/b" matches "a/b", "a/x/b",
// "a/x/y/b" and so on.
//
// - Other consecutive asterisks are considered invalid.
// - Other consecutive asterisks are considered invalid.
//
// Copyright and license
// =====================
// Copyright and license
// =====================
//
// Copyright (c) Oleg Sklyar, Silvertern and source{d}
// Copyright (c) Oleg Sklyar, Silvertern and source{d}
//
// The package code was donated to source{d} to include, modify and develop
// further as a part of the `go-git` project, release it on the license of
// the whole project or delete it from the project.
// The package code was donated to source{d} to include, modify and develop
// further as a part of the `go-git` project, release it on the license of
// the whole project or delete it from the project.
package gitignore

200
vendor/github.com/go-git/go-git/v5/plumbing/format/idxfile/doc.go generated vendored
View File

@ -1,127 +1,127 @@
// Package idxfile implements encoding and decoding of packfile idx files.
//
// == Original (version 1) pack-*.idx files have the following format:
// == Original (version 1) pack-*.idx files have the following format:
//
// - The header consists of 256 4-byte network byte order
// integers. N-th entry of this table records the number of
// objects in the corresponding pack, the first byte of whose
// object name is less than or equal to N. This is called the
// 'first-level fan-out' table.
// - The header consists of 256 4-byte network byte order
// integers. N-th entry of this table records the number of
// objects in the corresponding pack, the first byte of whose
// object name is less than or equal to N. This is called the
// 'first-level fan-out' table.
//
// - The header is followed by sorted 24-byte entries, one entry
// per object in the pack. Each entry is:
// - The header is followed by sorted 24-byte entries, one entry
// per object in the pack. Each entry is:
//
// 4-byte network byte order integer, recording where the
// object is stored in the packfile as the offset from the
// beginning.
// 4-byte network byte order integer, recording where the
// object is stored in the packfile as the offset from the
// beginning.
//
// 20-byte object name.
// 20-byte object name.
//
// - The file is concluded with a trailer:
// - The file is concluded with a trailer:
//
// A copy of the 20-byte SHA1 checksum at the end of
// corresponding packfile.
// A copy of the 20-byte SHA1 checksum at the end of
// corresponding packfile.
//
// 20-byte SHA1-checksum of all of the above.
// 20-byte SHA1-checksum of all of the above.
//
// Pack Idx file:
// Pack Idx file:
//
// -- +--------------------------------+
// fanout | fanout[0] = 2 (for example) |-.
// table +--------------------------------+ |
// | fanout[1] | |
// +--------------------------------+ |
// | fanout[2] | |
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
// | fanout[255] = total objects |---.
// -- +--------------------------------+ | |
// main | offset | | |
// index | object name 00XXXXXXXXXXXXXXXX | | |
// tab +--------------------------------+ | |
// | offset | | |
// | object name 00XXXXXXXXXXXXXXXX | | |
// +--------------------------------+<+ |
// .-| offset | |
// | | object name 01XXXXXXXXXXXXXXXX | |
// | +--------------------------------+ |
// | | offset | |
// | | object name 01XXXXXXXXXXXXXXXX | |
// | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
// | | offset | |
// | | object name FFXXXXXXXXXXXXXXXX | |
// --| +--------------------------------+<--+
// trailer | | packfile checksum |
// | +--------------------------------+
// | | idxfile checksum |
// | +--------------------------------+
// .---------.
// |
// Pack file entry: <+
// -- +--------------------------------+
// fanout | fanout[0] = 2 (for example) |-.
// table +--------------------------------+ |
// | fanout[1] | |
// +--------------------------------+ |
// | fanout[2] | |
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
// | fanout[255] = total objects |---.
// -- +--------------------------------+ | |
// main | offset | | |
// index | object name 00XXXXXXXXXXXXXXXX | | |
// tab +--------------------------------+ | |
// | offset | | |
// | object name 00XXXXXXXXXXXXXXXX | | |
// +--------------------------------+<+ |
// .-| offset | |
// | | object name 01XXXXXXXXXXXXXXXX | |
// | +--------------------------------+ |
// | | offset | |
// | | object name 01XXXXXXXXXXXXXXXX | |
// | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
// | | offset | |
// | | object name FFXXXXXXXXXXXXXXXX | |
// --| +--------------------------------+<--+
// trailer | | packfile checksum |
// | +--------------------------------+
// | | idxfile checksum |
// | +--------------------------------+
// .---------.
// |
// Pack file entry: <+
//
// packed object header:
// 1-byte size extension bit (MSB)
// type (next 3 bit)
// size0 (lower 4-bit)
// n-byte sizeN (as long as MSB is set, each 7-bit)
// size0..sizeN form 4+7+7+..+7 bit integer, size0
// is the least significant part, and sizeN is the
// most significant part.
// packed object data:
// If it is not DELTA, then deflated bytes (the size above
// is the size before compression).
// If it is REF_DELTA, then
// 20-byte base object name SHA1 (the size above is the
// size of the delta data that follows).
// delta data, deflated.
// If it is OFS_DELTA, then
// n-byte offset (see below) interpreted as a negative
// offset from the type-byte of the header of the
// ofs-delta entry (the size above is the size of
// the delta data that follows).
// delta data, deflated.
// packed object header:
// 1-byte size extension bit (MSB)
// type (next 3 bit)
// size0 (lower 4-bit)
// n-byte sizeN (as long as MSB is set, each 7-bit)
// size0..sizeN form 4+7+7+..+7 bit integer, size0
// is the least significant part, and sizeN is the
// most significant part.
// packed object data:
// If it is not DELTA, then deflated bytes (the size above
// is the size before compression).
// If it is REF_DELTA, then
// 20-byte base object name SHA1 (the size above is the
// size of the delta data that follows).
// delta data, deflated.
// If it is OFS_DELTA, then
// n-byte offset (see below) interpreted as a negative
// offset from the type-byte of the header of the
// ofs-delta entry (the size above is the size of
// the delta data that follows).
// delta data, deflated.
//
// offset encoding:
// n bytes with MSB set in all but the last one.
// The offset is then the number constructed by
// concatenating the lower 7 bit of each byte, and
// for n >= 2 adding 2^7 + 2^14 + ... + 2^(7*(n-1))
// to the result.
// offset encoding:
// n bytes with MSB set in all but the last one.
// The offset is then the number constructed by
// concatenating the lower 7 bit of each byte, and
// for n >= 2 adding 2^7 + 2^14 + ... + 2^(7*(n-1))
// to the result.
//
// == Version 2 pack-*.idx files support packs larger than 4 GiB, and
// have some other reorganizations. They have the format:
// == Version 2 pack-*.idx files support packs larger than 4 GiB, and
// have some other reorganizations. They have the format:
//
// - A 4-byte magic number '\377tOc' which is an unreasonable
// fanout[0] value.
// - A 4-byte magic number '\377tOc' which is an unreasonable
// fanout[0] value.
//
// - A 4-byte version number (= 2)
// - A 4-byte version number (= 2)
//
// - A 256-entry fan-out table just like v1.
// - A 256-entry fan-out table just like v1.
//
// - A table of sorted 20-byte SHA1 object names. These are
// packed together without offset values to reduce the cache
// footprint of the binary search for a specific object name.
// - A table of sorted 20-byte SHA1 object names. These are
// packed together without offset values to reduce the cache
// footprint of the binary search for a specific object name.
//
// - A table of 4-byte CRC32 values of the packed object data.
// This is new in v2 so compressed data can be copied directly
// from pack to pack during repacking without undetected
// data corruption.
// - A table of 4-byte CRC32 values of the packed object data.
// This is new in v2 so compressed data can be copied directly
// from pack to pack during repacking without undetected
// data corruption.
//
// - A table of 4-byte offset values (in network byte order).
// These are usually 31-bit pack file offsets, but large
// offsets are encoded as an index into the next table with
// the msbit set.
// - A table of 4-byte offset values (in network byte order).
// These are usually 31-bit pack file offsets, but large
// offsets are encoded as an index into the next table with
// the msbit set.
//
// - A table of 8-byte offset entries (empty for pack files less
// than 2 GiB). Pack files are organized with heavily used
// objects toward the front, so most object references should
// not need to refer to this table.
// - A table of 8-byte offset entries (empty for pack files less
// than 2 GiB). Pack files are organized with heavily used
// objects toward the front, so most object references should
// not need to refer to this table.
//
// - The same trailer as a v1 pack file:
// - The same trailer as a v1 pack file:
//
// A copy of the 20-byte SHA1 checksum at the end of
// corresponding packfile.
// A copy of the 20-byte SHA1 checksum at the end of
// corresponding packfile.
//
// 20-byte SHA1-checksum of all of the above.
// 20-byte SHA1-checksum of all of the above.
//
// Source:
// https://www.kernel.org/pub/software/scm/git/docs/v1.7.5/technical/pack-format.txt

474
vendor/github.com/go-git/go-git/v5/plumbing/format/index/doc.go generated vendored
View File

@ -1,360 +1,360 @@
// Package index implements encoding and decoding of index format files.
//
// Git index format
// ================
// Git index format
// ================
//
// == The Git index file has the following format
// == The Git index file has the following format
//
// All binary numbers are in network byte order. Version 2 is described
// here unless stated otherwise.
// All binary numbers are in network byte order. Version 2 is described
// here unless stated otherwise.
//
// - A 12-byte header consisting of
// - A 12-byte header consisting of
//
// 4-byte signature:
// The signature is { 'D', 'I', 'R', 'C' } (stands for "dircache")
// 4-byte signature:
// The signature is { 'D', 'I', 'R', 'C' } (stands for "dircache")
//
// 4-byte version number:
// The current supported versions are 2, 3 and 4.
// 4-byte version number:
// The current supported versions are 2, 3 and 4.
//
// 32-bit number of index entries.
// 32-bit number of index entries.
//
// - A number of sorted index entries (see below).
// - A number of sorted index entries (see below).
//
// - Extensions
// - Extensions
//
// Extensions are identified by signature. Optional extensions can
// be ignored if Git does not understand them.
// Extensions are identified by signature. Optional extensions can
// be ignored if Git does not understand them.
//
// Git currently supports cached tree and resolve undo extensions.
// Git currently supports cached tree and resolve undo extensions.
//
// 4-byte extension signature. If the first byte is 'A'..'Z' the
// extension is optional and can be ignored.
// 4-byte extension signature. If the first byte is 'A'..'Z' the
// extension is optional and can be ignored.
//
// 32-bit size of the extension
// 32-bit size of the extension
//
// Extension data
// Extension data
//
// - 160-bit SHA-1 over the content of the index file before this
// checksum.
// - 160-bit SHA-1 over the content of the index file before this
// checksum.
//
// == Index entry
// == Index entry
//
// Index entries are sorted in ascending order on the name field,
// interpreted as a string of unsigned bytes (i.e. memcmp() order, no
// localization, no special casing of directory separator '/'). Entries
// with the same name are sorted by their stage field.
// Index entries are sorted in ascending order on the name field,
// interpreted as a string of unsigned bytes (i.e. memcmp() order, no
// localization, no special casing of directory separator '/'). Entries
// with the same name are sorted by their stage field.
//
// 32-bit ctime seconds, the last time a file's metadata changed
// this is stat(2) data
// 32-bit ctime seconds, the last time a file's metadata changed
// this is stat(2) data
//
// 32-bit ctime nanosecond fractions
// this is stat(2) data
// 32-bit ctime nanosecond fractions
// this is stat(2) data
//
// 32-bit mtime seconds, the last time a file's data changed
// this is stat(2) data
// 32-bit mtime seconds, the last time a file's data changed
// this is stat(2) data
//
// 32-bit mtime nanosecond fractions
// this is stat(2) data
// 32-bit mtime nanosecond fractions
// this is stat(2) data
//
// 32-bit dev
// this is stat(2) data
// 32-bit dev
// this is stat(2) data
//
// 32-bit ino
// this is stat(2) data
// 32-bit ino
// this is stat(2) data
//
// 32-bit mode, split into (high to low bits)
// 32-bit mode, split into (high to low bits)
//
// 4-bit object type
// valid values in binary are 1000 (regular file), 1010 (symbolic link)
// and 1110 (gitlink)
// 4-bit object type
// valid values in binary are 1000 (regular file), 1010 (symbolic link)
// and 1110 (gitlink)
//
// 3-bit unused
// 3-bit unused
//
// 9-bit unix permission. Only 0755 and 0644 are valid for regular files.
// Symbolic links and gitlinks have value 0 in this field.
// 9-bit unix permission. Only 0755 and 0644 are valid for regular files.
// Symbolic links and gitlinks have value 0 in this field.
//
// 32-bit uid
// this is stat(2) data
// 32-bit uid
// this is stat(2) data
//
// 32-bit gid
// this is stat(2) data
// 32-bit gid
// this is stat(2) data
//
// 32-bit file size
// This is the on-disk size from stat(2), truncated to 32-bit.
// 32-bit file size
// This is the on-disk size from stat(2), truncated to 32-bit.
//
// 160-bit SHA-1 for the represented object
// 160-bit SHA-1 for the represented object
//
// A 16-bit 'flags' field split into (high to low bits)
// A 16-bit 'flags' field split into (high to low bits)
//
// 1-bit assume-valid flag
// 1-bit assume-valid flag
//
// 1-bit extended flag (must be zero in version 2)
// 1-bit extended flag (must be zero in version 2)
//
// 2-bit stage (during merge)
// 2-bit stage (during merge)
//
// 12-bit name length if the length is less than 0xFFF; otherwise 0xFFF
// is stored in this field.
// 12-bit name length if the length is less than 0xFFF; otherwise 0xFFF
// is stored in this field.
//
// (Version 3 or later) A 16-bit field, only applicable if the
// "extended flag" above is 1, split into (high to low bits).
// (Version 3 or later) A 16-bit field, only applicable if the
// "extended flag" above is 1, split into (high to low bits).
//
// 1-bit reserved for future
// 1-bit reserved for future
//
// 1-bit skip-worktree flag (used by sparse checkout)
// 1-bit skip-worktree flag (used by sparse checkout)
//
// 1-bit intent-to-add flag (used by "git add -N")
// 1-bit intent-to-add flag (used by "git add -N")
//
// 13-bit unused, must be zero
// 13-bit unused, must be zero
//
// Entry path name (variable length) relative to top level directory
// (without leading slash). '/' is used as path separator. The special
// path components ".", ".." and ".git" (without quotes) are disallowed.
// Trailing slash is also disallowed.
// Entry path name (variable length) relative to top level directory
// (without leading slash). '/' is used as path separator. The special
// path components ".", ".." and ".git" (without quotes) are disallowed.
// Trailing slash is also disallowed.
//
// The exact encoding is undefined, but the '.' and '/' characters
// are encoded in 7-bit ASCII and the encoding cannot contain a NUL
// byte (iow, this is a UNIX pathname).
// The exact encoding is undefined, but the '.' and '/' characters
// are encoded in 7-bit ASCII and the encoding cannot contain a NUL
// byte (iow, this is a UNIX pathname).
//
// (Version 4) In version 4, the entry path name is prefix-compressed
// relative to the path name for the previous entry (the very first
// entry is encoded as if the path name for the previous entry is an
// empty string). At the beginning of an entry, an integer N in the
// variable width encoding (the same encoding as the offset is encoded
// for OFS_DELTA pack entries; see pack-format.txt) is stored, followed
// by a NUL-terminated string S. Removing N bytes from the end of the
// path name for the previous entry, and replacing it with the string S
// yields the path name for this entry.
// (Version 4) In version 4, the entry path name is prefix-compressed
// relative to the path name for the previous entry (the very first
// entry is encoded as if the path name for the previous entry is an
// empty string). At the beginning of an entry, an integer N in the
// variable width encoding (the same encoding as the offset is encoded
// for OFS_DELTA pack entries; see pack-format.txt) is stored, followed
// by a NUL-terminated string S. Removing N bytes from the end of the
// path name for the previous entry, and replacing it with the string S
// yields the path name for this entry.
//
// 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes
// while keeping the name NUL-terminated.
// 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes
// while keeping the name NUL-terminated.
//
// (Version 4) In version 4, the padding after the pathname does not
// exist.
// (Version 4) In version 4, the padding after the pathname does not
// exist.
//
// Interpretation of index entries in split index mode is completely
// different. See below for details.
// Interpretation of index entries in split index mode is completely
// different. See below for details.
//
// == Extensions
// == Extensions
//
// === Cached tree
// === Cached tree
//
// Cached tree extension contains pre-computed hashes for trees that can
// be derived from the index. It helps speed up tree object generation
// from index for a new commit.
// Cached tree extension contains pre-computed hashes for trees that can
// be derived from the index. It helps speed up tree object generation
// from index for a new commit.
//
// When a path is updated in index, the path must be invalidated and
// removed from tree cache.
// When a path is updated in index, the path must be invalidated and
// removed from tree cache.
//
// The signature for this extension is { 'T', 'R', 'E', 'E' }.
// The signature for this extension is { 'T', 'R', 'E', 'E' }.
//
// A series of entries fill the entire extension; each of which
// consists of:
// A series of entries fill the entire extension; each of which
// consists of:
//
// - NUL-terminated path component (relative to its parent directory);
// - NUL-terminated path component (relative to its parent directory);
//
// - ASCII decimal number of entries in the index that is covered by the
// tree this entry represents (entry_count);
// - ASCII decimal number of entries in the index that is covered by the
// tree this entry represents (entry_count);
//
// - A space (ASCII 32);
// - A space (ASCII 32);
//
// - ASCII decimal number that represents the number of subtrees this
// tree has;
// - ASCII decimal number that represents the number of subtrees this
// tree has;
//
// - A newline (ASCII 10); and
// - A newline (ASCII 10); and
//
// - 160-bit object name for the object that would result from writing
// this span of index as a tree.
// - 160-bit object name for the object that would result from writing
// this span of index as a tree.
//
// An entry can be in an invalidated state and is represented by having
// a negative number in the entry_count field. In this case, there is no
// object name and the next entry starts immediately after the newline.
// When writing an invalid entry, -1 should always be used as entry_count.
// An entry can be in an invalidated state and is represented by having
// a negative number in the entry_count field. In this case, there is no
// object name and the next entry starts immediately after the newline.
// When writing an invalid entry, -1 should always be used as entry_count.
//
// The entries are written out in the top-down, depth-first order. The
// first entry represents the root level of the repository, followed by the
// first subtree--let's call this A--of the root level (with its name
// relative to the root level), followed by the first subtree of A (with
// its name relative to A), ...
// The entries are written out in the top-down, depth-first order. The
// first entry represents the root level of the repository, followed by the
// first subtree--let's call this A--of the root level (with its name
// relative to the root level), followed by the first subtree of A (with
// its name relative to A), ...
//
// === Resolve undo
// === Resolve undo
//
// A conflict is represented in the index as a set of higher stage entries.
// When a conflict is resolved (e.g. with "git add path"), these higher
// stage entries will be removed and a stage-0 entry with proper resolution
// is added.
// A conflict is represented in the index as a set of higher stage entries.
// When a conflict is resolved (e.g. with "git add path"), these higher
// stage entries will be removed and a stage-0 entry with proper resolution
// is added.
//
// When these higher stage entries are removed, they are saved in the
// resolve undo extension, so that conflicts can be recreated (e.g. with
// "git checkout -m"), in case users want to redo a conflict resolution
// from scratch.
// When these higher stage entries are removed, they are saved in the
// resolve undo extension, so that conflicts can be recreated (e.g. with
// "git checkout -m"), in case users want to redo a conflict resolution
// from scratch.
//
// The signature for this extension is { 'R', 'E', 'U', 'C' }.
// The signature for this extension is { 'R', 'E', 'U', 'C' }.
//
// A series of entries fill the entire extension; each of which
// consists of:
// A series of entries fill the entire extension; each of which
// consists of:
//
// - NUL-terminated pathname the entry describes (relative to the root of
// the repository, i.e. full pathname);
// - NUL-terminated pathname the entry describes (relative to the root of
// the repository, i.e. full pathname);
//
// - Three NUL-terminated ASCII octal numbers, entry mode of entries in
// stage 1 to 3 (a missing stage is represented by "0" in this field);
// and
// - Three NUL-terminated ASCII octal numbers, entry mode of entries in
// stage 1 to 3 (a missing stage is represented by "0" in this field);
// and
//
// - At most three 160-bit object names of the entry in stages from 1 to 3
// (nothing is written for a missing stage).
// - At most three 160-bit object names of the entry in stages from 1 to 3
// (nothing is written for a missing stage).
//
// === Split index
// === Split index
//
// In split index mode, the majority of index entries could be stored
// in a separate file. This extension records the changes to be made on
// top of that to produce the final index.
// In split index mode, the majority of index entries could be stored
// in a separate file. This extension records the changes to be made on
// top of that to produce the final index.
//
// The signature for this extension is { 'l', 'i', 'n', 'k' }.
// The signature for this extension is { 'l', 'i', 'n', 'k' }.
//
// The extension consists of:
// The extension consists of:
//
// - 160-bit SHA-1 of the shared index file. The shared index file path
// is $GIT_DIR/sharedindex.<SHA-1>. If all 160 bits are zero, the
// index does not require a shared index file.
// - 160-bit SHA-1 of the shared index file. The shared index file path
// is $GIT_DIR/sharedindex.<SHA-1>. If all 160 bits are zero, the
// index does not require a shared index file.
//
// - An ewah-encoded delete bitmap, each bit represents an entry in the
// shared index. If a bit is set, its corresponding entry in the
// shared index will be removed from the final index. Note, because
// a delete operation changes index entry positions, but we do need
// original positions in replace phase, it's best to just mark
// entries for removal, then do a mass deletion after replacement.
// - An ewah-encoded delete bitmap, each bit represents an entry in the
// shared index. If a bit is set, its corresponding entry in the
// shared index will be removed from the final index. Note, because
// a delete operation changes index entry positions, but we do need
// original positions in replace phase, it's best to just mark
// entries for removal, then do a mass deletion after replacement.
//
// - An ewah-encoded replace bitmap, each bit represents an entry in
// the shared index. If a bit is set, its corresponding entry in the
// shared index will be replaced with an entry in this index
// file. All replaced entries are stored in sorted order in this
// index. The first "1" bit in the replace bitmap corresponds to the
// first index entry, the second "1" bit to the second entry and so
// on. Replaced entries may have empty path names to save space.
// - An ewah-encoded replace bitmap, each bit represents an entry in
// the shared index. If a bit is set, its corresponding entry in the
// shared index will be replaced with an entry in this index
// file. All replaced entries are stored in sorted order in this
// index. The first "1" bit in the replace bitmap corresponds to the
// first index entry, the second "1" bit to the second entry and so
// on. Replaced entries may have empty path names to save space.
//
// The remaining index entries after replaced ones will be added to the
// final index. These added entries are also sorted by entry name then
// stage.
// The remaining index entries after replaced ones will be added to the
// final index. These added entries are also sorted by entry name then
// stage.
//
// == Untracked cache
// == Untracked cache
//
// Untracked cache saves the untracked file list and necessary data to
// verify the cache. The signature for this extension is { 'U', 'N',
// 'T', 'R' }.
// Untracked cache saves the untracked file list and necessary data to
// verify the cache. The signature for this extension is { 'U', 'N',
// 'T', 'R' }.
//
// The extension starts with
// The extension starts with
//
// - A sequence of NUL-terminated strings, preceded by the size of the
// sequence in variable width encoding. Each string describes the
// environment where the cache can be used.
// - A sequence of NUL-terminated strings, preceded by the size of the
// sequence in variable width encoding. Each string describes the
// environment where the cache can be used.
//
// - Stat data of $GIT_DIR/info/exclude. See "Index entry" section from
// ctime field until "file size".
// - Stat data of $GIT_DIR/info/exclude. See "Index entry" section from
// ctime field until "file size".
//
// - Stat data of plumbing.excludesfile
// - Stat data of plumbing.excludesfile
//
// - 32-bit dir_flags (see struct dir_struct)
// - 32-bit dir_flags (see struct dir_struct)
//
// - 160-bit SHA-1 of $GIT_DIR/info/exclude. Null SHA-1 means the file
// does not exist.
// - 160-bit SHA-1 of $GIT_DIR/info/exclude. Null SHA-1 means the file
// does not exist.
//
// - 160-bit SHA-1 of plumbing.excludesfile. Null SHA-1 means the file does
// not exist.
// - 160-bit SHA-1 of plumbing.excludesfile. Null SHA-1 means the file does
// not exist.
//
// - NUL-terminated string of per-dir exclude file name. This usually
// is ".gitignore".
// - NUL-terminated string of per-dir exclude file name. This usually
// is ".gitignore".
//
// - The number of following directory blocks, variable width
// encoding. If this number is zero, the extension ends here with a
// following NUL.
// - The number of following directory blocks, variable width
// encoding. If this number is zero, the extension ends here with a
// following NUL.
//
// - A number of directory blocks in depth-first-search order, each
// consists of
// - A number of directory blocks in depth-first-search order, each
// consists of
//
// - The number of untracked entries, variable width encoding.
// - The number of untracked entries, variable width encoding.
//
// - The number of sub-directory blocks, variable width encoding.
// - The number of sub-directory blocks, variable width encoding.
//
// - The directory name terminated by NUL.
// - The directory name terminated by NUL.
//
// - A number of untracked file/dir names terminated by NUL.
// - A number of untracked file/dir names terminated by NUL.
//
// The remaining data of each directory block is grouped by type:
// The remaining data of each directory block is grouped by type:
//
// - An ewah bitmap, the n-th bit marks whether the n-th directory has
// valid untracked cache entries.
// - An ewah bitmap, the n-th bit marks whether the n-th directory has
// valid untracked cache entries.
//
// - An ewah bitmap, the n-th bit records "check-only" bit of
// read_directory_recursive() for the n-th directory.
// - An ewah bitmap, the n-th bit records "check-only" bit of
// read_directory_recursive() for the n-th directory.
//
// - An ewah bitmap, the n-th bit indicates whether SHA-1 and stat data
// is valid for the n-th directory and exists in the next data.
// - An ewah bitmap, the n-th bit indicates whether SHA-1 and stat data
// is valid for the n-th directory and exists in the next data.
//
// - An array of stat data. The n-th data corresponds with the n-th
// "one" bit in the previous ewah bitmap.
// - An array of stat data. The n-th data corresponds with the n-th
// "one" bit in the previous ewah bitmap.
//
// - An array of SHA-1. The n-th SHA-1 corresponds with the n-th "one" bit
// in the previous ewah bitmap.
// - An array of SHA-1. The n-th SHA-1 corresponds with the n-th "one" bit
// in the previous ewah bitmap.
//
// - One NUL.
// - One NUL.
//
// == File System Monitor cache
// == File System Monitor cache
//
// The file system monitor cache tracks files for which the core.fsmonitor
// hook has told us about changes. The signature for this extension is
// { 'F', 'S', 'M', 'N' }.
// The file system monitor cache tracks files for which the core.fsmonitor
// hook has told us about changes. The signature for this extension is
// { 'F', 'S', 'M', 'N' }.
//
// The extension starts with
// The extension starts with
//
// - 32-bit version number: the current supported version is 1.
// - 32-bit version number: the current supported version is 1.
//
// - 64-bit time: the extension data reflects all changes through the given
// time which is stored as the nanoseconds elapsed since midnight,
// January 1, 1970.
// - 64-bit time: the extension data reflects all changes through the given
// time which is stored as the nanoseconds elapsed since midnight,
// January 1, 1970.
//
// - 32-bit bitmap size: the size of the CE_FSMONITOR_VALID bitmap.
// - 32-bit bitmap size: the size of the CE_FSMONITOR_VALID bitmap.
//
// - An ewah bitmap, the n-th bit indicates whether the n-th index entry
// is not CE_FSMONITOR_VALID.
// - An ewah bitmap, the n-th bit indicates whether the n-th index entry
// is not CE_FSMONITOR_VALID.
//
// == End of Index Entry
// == End of Index Entry
//
// The End of Index Entry (EOIE) is used to locate the end of the variable
// length index entries and the beginning of the extensions. Code can take
// advantage of this to quickly locate the index extensions without having
// to parse through all of the index entries.
// The End of Index Entry (EOIE) is used to locate the end of the variable
// length index entries and the beginning of the extensions. Code can take
// advantage of this to quickly locate the index extensions without having
// to parse through all of the index entries.
//
// Because it must be able to be loaded before the variable length cache
// entries and other index extensions, this extension must be written last.
// The signature for this extension is { 'E', 'O', 'I', 'E' }.
// Because it must be able to be loaded before the variable length cache
// entries and other index extensions, this extension must be written last.
// The signature for this extension is { 'E', 'O', 'I', 'E' }.
//
// The extension consists of:
// The extension consists of:
//
// - 32-bit offset to the end of the index entries
// - 32-bit offset to the end of the index entries
//
// - 160-bit SHA-1 over the extension types and their sizes (but not
// their contents). E.g. if we have "TREE" extension that is N-bytes
// long, "REUC" extension that is M-bytes long, followed by "EOIE",
// then the hash would be:
// - 160-bit SHA-1 over the extension types and their sizes (but not
// their contents). E.g. if we have "TREE" extension that is N-bytes
// long, "REUC" extension that is M-bytes long, followed by "EOIE",
// then the hash would be:
//
// SHA-1("TREE" + <binary representation of N> +
// "REUC" + <binary representation of M>)
// SHA-1("TREE" + <binary representation of N> +
// "REUC" + <binary representation of M>)
//
// == Index Entry Offset Table
// == Index Entry Offset Table
//
// The Index Entry Offset Table (IEOT) is used to help address the CPU
// cost of loading the index by enabling multi-threading the process of
// converting cache entries from the on-disk format to the in-memory format.
// The signature for this extension is { 'I', 'E', 'O', 'T' }.
// The Index Entry Offset Table (IEOT) is used to help address the CPU
// cost of loading the index by enabling multi-threading the process of
// converting cache entries from the on-disk format to the in-memory format.
// The signature for this extension is { 'I', 'E', 'O', 'T' }.
//
// The extension consists of:
// The extension consists of:
//
// - 32-bit version (currently 1)
// - 32-bit version (currently 1)
//
// - A number of index offset entries each consisting of:
// - A number of index offset entries each consisting of:
//
// - 32-bit offset from the beginning of the file to the first cache entry
// in this block of entries.
// - 32-bit offset from the beginning of the file to the first cache entry
// in this block of entries.
//
// - 32-bit count of cache entries in this blockpackage index
// - 32-bit count of cache entries in this blockpackage index
package index

4
vendor/github.com/go-git/go-git/v5/plumbing/format/index/index.go generated vendored
View File

@ -203,8 +203,8 @@ type ResolveUndoEntry struct {
// can take advantage of this to quickly locate the index extensions without
// having to parse through all of the index entries.
//
// Because it must be able to be loaded before the variable length cache
// entries and other index extensions, this extension must be written last.
// Because it must be able to be loaded before the variable length cache
// entries and other index extensions, this extension must be written last.
type EndOfIndexEntry struct {
// Offset to the end of the index entries
Offset uint32

45
vendor/github.com/go-git/go-git/v5/plumbing/format/packfile/doc.go generated vendored
View File

@ -1,37 +1,38 @@
// Package packfile implements encoding and decoding of packfile format.
//
// == pack-*.pack files have the following format:
// == pack-*.pack files have the following format:
//
// - A header appears at the beginning and consists of the following:
// - A header appears at the beginning and consists of the following:
//
// 4-byte signature:
// The signature is: {'P', 'A', 'C', 'K'}
// 4-byte signature:
// The signature is: {'P', 'A', 'C', 'K'}
//
// 4-byte version number (network byte order):
// GIT currently accepts version number 2 or 3 but
// generates version 2 only.
// 4-byte version number (network byte order):
// GIT currently accepts version number 2 or 3 but
// generates version 2 only.
//
// 4-byte number of objects contained in the pack (network byte order)
// 4-byte number of objects contained in the pack (network byte order)
//
// Observation: we cannot have more than 4G versions ;-) and
// more than 4G objects in a pack.
// Observation: we cannot have more than 4G versions ;-) and
// more than 4G objects in a pack.
//
// - The header is followed by number of object entries, each of
// which looks like this:
// - The header is followed by number of object entries, each of
// which looks like this:
//
// (undeltified representation)
// n-byte type and length (3-bit type, (n-1)*7+4-bit length)
// compressed data
// (undeltified representation)
// n-byte type and length (3-bit type, (n-1)*7+4-bit length)
// compressed data
//
// (deltified representation)
// n-byte type and length (3-bit type, (n-1)*7+4-bit length)
// 20-byte base object name
// compressed delta data
// (deltified representation)
// n-byte type and length (3-bit type, (n-1)*7+4-bit length)
// 20-byte base object name
// compressed delta data
//
// Observation: length of each object is encoded in a variable
// length format and is not constrained to 32-bit or anything.
// Observation: length of each object is encoded in a variable
// length format and is not constrained to 32-bit or anything.
//
// - The trailer records 20-byte SHA1 checksum of all of the above.
//
// - The trailer records 20-byte SHA1 checksum of all of the above.
//
// Source:
// https://www.kernel.org/pub/software/scm/git/docs/v1.7.5/technical/pack-protocol.txt

24
vendor/github.com/go-git/go-git/v5/plumbing/object/object.go generated vendored
View File

@ -24,18 +24,18 @@ var ErrUnsupportedObject = errors.New("unsupported object type")
// Object is returned when an object can be of any type. It is frequently used
// with a type cast to acquire the specific type of object:
//
// func process(obj Object) {
// switch o := obj.(type) {
// case *Commit:
// // o is a Commit
// case *Tree:
// // o is a Tree
// case *Blob:
// // o is a Blob
// case *Tag:
// // o is a Tag
// }
// }
// func process(obj Object) {
// switch o := obj.(type) {
// case *Commit:
// // o is a Commit
// case *Tree:
// // o is a Tree
// case *Blob:
// // o is a Blob
// case *Tag:
// // o is a Tag
// }
// }
//
// This interface is intentionally different from plumbing.EncodedObject, which
// is a lower level interface used by storage implementations to read and write

1
vendor/github.com/go-git/go-git/v5/plumbing/protocol/packp/updreq.go generated vendored
View File

@ -48,7 +48,6 @@ func NewReferenceUpdateRequest() *ReferenceUpdateRequest {
// - ofs-delta
// - ref-delta
// - delete-refs
//
// It leaves up to the user to add the following capabilities later:
// - atomic
// - ofs-delta

7
vendor/github.com/go-git/go-git/v5/utils/binary/read.go generated vendored
View File

@ -80,9 +80,10 @@ func ReadUntilFromBufioReader(r *bufio.Reader, delim byte) ([]byte, error) {
//
// This is how the offset is saved in C:
//
// dheader[pos] = ofs & 127;
// while (ofs >>= 7)
// dheader[--pos] = 128 | (--ofs & 127);
// dheader[pos] = ofs & 127;
// while (ofs >>= 7)
// dheader[--pos] = 128 | (--ofs & 127);
//
func ReadVariableWidthInt(r io.Reader) (int64, error) {
var c byte
if err := Read(r, &c); err != nil {

5
vendor/github.com/go-git/go-git/v5/utils/merkletrie/internal/frame/frame.go generated vendored
View File

@ -42,9 +42,8 @@ func New(n noder.Noder) (*Frame, error) {
// separated by comas.
//
// Examples:
//
// []
// ["a", "b"]
// []
// ["a", "b"]
func (f *Frame) String() string {
var buf bytes.Buffer
_ = buf.WriteByte('[')

17
vendor/github.com/go-git/go-git/v5/utils/merkletrie/iter.go generated vendored
View File

@ -17,14 +17,15 @@ import (
// This is the kind of traversal you will expect when listing ordinary
// files and directories recursively, for example:
//
// Trie Traversal order
// ---- ---------------
// .
// / | \ c
// / | \ d/
// d c z ===> d/a
// / \ d/b
// b a z
// Trie Traversal order
// ---- ---------------
// .
// / | \ c
// / | \ d/
// d c z ===> d/a
// / \ d/b
// b a z
//
//
// This iterator is somewhat especial as you can chose to skip whole
// "directories" when iterating:

2
vendor/github.com/go-git/go-git/v5/utils/merkletrie/noder/noder.go generated vendored
View File

@ -53,7 +53,7 @@ type Noder interface {
// implement NumChildren in O(1) while Children is usually more
// complex.
NumChildren() (int, error)
Skip() bool
Skip() bool
}
// NoChildren represents the children of a noder without children.

1
vendor/github.com/go-git/go-git/v5/worktree_bsd.go generated vendored
View File

@ -1,4 +1,3 @@
//go:build darwin || freebsd || netbsd
// +build darwin freebsd netbsd
package git

1
vendor/github.com/go-git/go-git/v5/worktree_js.go generated vendored
View File

@ -1,4 +1,3 @@
//go:build js
// +build js
package git

1
vendor/github.com/go-git/go-git/v5/worktree_linux.go generated vendored
View File

@ -1,4 +1,3 @@
//go:build linux
// +build linux
package git

1
vendor/github.com/go-git/go-git/v5/worktree_unix_other.go generated vendored
View File

@ -1,4 +1,3 @@
//go:build openbsd || dragonfly || solaris
// +build openbsd dragonfly solaris
package git

1
vendor/github.com/go-git/go-git/v5/worktree_windows.go generated vendored
View File

@ -1,4 +1,3 @@
//go:build windows
// +build windows
package git