Support for API versions < v1.44 was removed in the client in [moby@96b29f5]
and [moby@7652f38], so we can remove fallback-code from the CLI as well,
as it won't be able to use those versions.
[moby@96b29f5]: 96b29f5a1f
[moby@7652f38]: 7652f38c28
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change updates the builder prune command to send the `ReservedSpace` parameter in preparation of `KeepStorage` deprecation in API v1.52.
Signed-off-by: Austin Vazquez <austin.vazquez@docker.com>
This replaces the visitAll recursive function with a test that verifies that
the option is set for all commands and subcommands, so that it doesn't have
to be modified at runtime.
We currently still have to loop over all functions for the setValidateArgs
call, but that can be looked at separately.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch deprecates exported NewPruneCommand and moves the
implementation details to an unexported function.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch removes the explicit `commands.AddCommands` function and
instead relies upon the `internal/commands` package which registers each
CLI command using `init()` instead.
Signed-off-by: Alano Terblanche <18033717+Benehiko@users.noreply.github.com>
This patch unexports the `builder` and `bake` stub command and it adds
deprecation notices on the exported functions.
It also registers the commands using the new `cli/internal/commands`
package when the init function executes.
Signed-off-by: Alano Terblanche <18033717+Benehiko@users.noreply.github.com>
Move the version-check for pruners to the pruner, which can
return a [ErrNotImplemented] error to indicate they won't
be run with the API version that's used.
This helps separating concerns, and doesn't enforce knowledge
about what's supported by each content-type onto the system
prune command.
[ErrNotImplemented]: https://pkg.go.dev/github.com/docker/docker@v28.3.3+incompatible/errdefs#ErrNotImplemented
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a "dry-run" / "pre-check" option for prune-functions,
which delegates constructing the confirmation message (what is
about to be pruned) and validation of the given options to the
prune-functions.
This helps separating concerns, and doesn't enforce knowledge
about what's supported by each content-type onto the system
prune command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Introduce a "prune" package in which we maintain a list of prune
functions that are registered. Known prune "content-types" are
included in a pre-defined order, after which additional content
can be registered.
Using this approach no longer requires the "RunPrune" functions
to be exported, and allows additional content-types to be
introduced without having to import those packages into the
system package, so keeping things more decoupled.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The [`docker buildx bake`][1] command has reached GA; this patch adds
a top-level `docker bake` command as alias for `docker buildx bake` to
improve discoverability and make it more convenient to use.
With this patch:
docker --help
Usage: docker [OPTIONS] COMMAND
A self-sufficient runtime for containers
Common Commands:
run Create and run a new container from an image
exec Execute a command in a running container
ps List containers
build Build an image from a Dockerfile
bake Build from a file
pull Download an image from a registry
push Upload an image to a registry
images List images
...
The command is hidden if buildx is not installed;
docker --help
Usage: docker [OPTIONS] COMMAND
A self-sufficient runtime for containers
Common Commands:
run Create and run a new container from an image
exec Execute a command in a running container
ps List containers
build Build an image from a Dockerfile
pull Download an image from a registry
push Upload an image to a registry
images List images
...
We can do some tweaking after this; currently it show an error
in situations where buildx is missing. We don't account for
"DOCKER_BUILDKIT=0", because this is a new feature that requires
buildx, and cannot be "disabled";
buildx missing;
docker bake
ERROR: bake requires the buildx component but it is missing or broken.
Install the buildx component to use bake:
https://docs.docker.com/go/buildx/
BuildKit disabled:
DOCKER_BUILDKIT=0 docker bake
ERROR: bake requires the buildx component but it is missing or broken.
Install the buildx component to use bake:
https://docs.docker.com/go/buildx/
[1]: https://www.docker.com/blog/ga-launch-docker-bake/
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes a quick pass through our tests;
Discard output/err
----------------------------------------------
Many tests were testing for error-conditions, but didn't discard output.
This produced a lot of noise when running the tests, and made it hard
to discover if there were actual failures, or if the output was expected.
For example:
=== RUN TestConfigCreateErrors
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: error creating config
--- PASS: TestConfigCreateErrors (0.00s)
And after discarding output:
=== RUN TestConfigCreateErrors
--- PASS: TestConfigCreateErrors (0.00s)
Use sub-tests where possible
----------------------------------------------
Some tests were already set-up to use test-tables, and even had a usable
name (or in some cases "error" to check for). Change them to actual sub-
tests. Same test as above, but now with sub-tests and output discarded:
=== RUN TestConfigCreateErrors
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments#01
=== RUN TestConfigCreateErrors/error_creating_config
--- PASS: TestConfigCreateErrors (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments#01 (0.00s)
--- PASS: TestConfigCreateErrors/error_creating_config (0.00s)
PASS
It's not perfect in all cases (in the above, there's duplicate "expected"
errors, but Go conveniently adds "#01" for the duplicate). There's probably
also various tests I missed that could still use the same changes applied;
we can improve these in follow-ups.
Set cmd.Args to prevent test-failures
----------------------------------------------
When running tests from my IDE, it compiles the tests before running,
then executes the compiled binary to run the tests. Cobra doesn't like
that, because in that situation `os.Args` is taken as argument for the
command that's executed. The command that's tested now sees the test-
flags as arguments (`-test.v -test.run ..`), which causes various tests
to fail ("Command XYZ does not accept arguments").
# compile the tests:
go test -c -o foo.test
# execute the test:
./foo.test -test.v -test.run TestFoo
=== RUN TestFoo
Error: "foo" accepts no arguments.
The Cobra maintainers ran into the same situation, and for their own
use have added a special case to ignore `os.Args` in these cases;
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L1078-L1083
args := c.args
// Workaround FAIL with "go test -v" or "cobra.test -test.v", see #155
if c.args == nil && filepath.Base(os.Args[0]) != "cobra.test" {
args = os.Args[1:]
}
Unfortunately, that exception is too specific (only checks for `cobra.test`),
so doesn't automatically fix the issue for other test-binaries. They did
provide a `cmd.SetArgs()` utility for this purpose
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L276-L280
// SetArgs sets arguments for the command. It is set to os.Args[1:] by default, if desired, can be overridden
// particularly useful when testing.
func (c *Command) SetArgs(a []string) {
c.args = a
}
And the fix is to explicitly set the command's args to an empty slice to
prevent Cobra from falling back to using `os.Args[1:]` as arguments.
cmd := newSomeThingCommand()
cmd.SetArgs([]string{})
Some tests already take this issue into account, and I updated some tests
for this, but there's likely many other ones that can use the same treatment.
Perhaps the Cobra maintainers would accept a contribution to make their
condition less specific and to look for binaries ending with a `.test`
suffix (which is what compiled binaries usually are named as).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch it is possible to alias an existing allowed command.
At the moment only builder allows an alias.
This also properly puts the build command under builder, instead of image
where it was for historical reasons.
Signed-off-by: Tibor Vass <tibor@docker.com>
- The `/build/prune` endpoint was added in API v1.31
- The `/network` endpoints were added in API v1.21
This patch hides these commands on older API versions
Before this change:
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
builder Manage builds
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
network Manage networks
system Manage Docker
trust Manage trust on Docker images
```
After this change
```
DOCKER_API_VERSION=1.0 docker
...
Management Commands:
container Manage containers
image Manage images
manifest Manage Docker image manifests and manifest lists
system Manage Docker
trust Manage trust on Docker images
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch adds a new builder subcommand, allowing to add more builder-related
commands in the future. Unfortunately `build` expects an argument so could not
be used as a subcommand.
This also implements `docker builder prune`, which is needed to prune the builder
cache manually without having to call `docker system prune`.
Today when relying on the legacy builder, users are able to prune dangling images
(used as build cache) by running `docker image prune`. This patch allows the
same usecase with buildkit.
Signed-off-by: Tibor Vass <tibor@docker.com>
