link feature in docker0 bridge by default provides short-id as a
container alias. With built-in SD feature, providing a container
short-id as a network alias will fill that gap.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: ea531f061d3c511e376753f9863cb41f1b96d87e
Component: engine
This test was flaky on ppc64le, where the average time to close was
around 1 second. This bumps that timeout to 60 seconds which should be
plently.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: f84cabd3b8a737e7539d71773b842daa8f0dc66b
Component: engine
This fix tries to fix the discrepancy between API and CLI on hostname
validation. Previously, the hostname validation was handled at the
CLI interface in runconfig/opts/parse.go and return an error if the
hostname is invalid. However, if an end user use the remote API to
pass the hostname, the error will not be returned immediately.
Instead the error will only be thrown out when the container creation
fails. This creates behavior discrepancy between API and CLI.
In this fix, the hostname validation was moved to
verifyContainerSettings so the behavior will be the same for API and
CLI.
After the change, since CLI does not handle the hostname validation
any more, the previous unit tests about hostname validation on CLI
in runconfig/opts/parse_test.go has to be updated as well because
there is no validation at this stage. All those unit tests are moved
to integration test TestRunTooLongHostname so that the hostname
validation is still properly covered as before.
Note: Since the hostname validation moved to API, the error message
changes from `invalid hostname format for --hostname:` to
`invalid hostname format:` as well because `--hostname` is passed
to CLI only.
This fix fixes#21595.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: ee4bd806ba6ccac0013eb812e7f30bfcfe12d22a
Component: engine
This vendors in new spec/runc that supports
setting readonly and masked paths in the
configuration. Using this allows us to make an
exception for `—-privileged`.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Upstream-commit: 3f81b4935292d5daedea9de4e2db0895986115da
Component: engine
Also modify an integration test that hardcoded the error string so it
uses the exported error variable from libcontainer/user.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Upstream-commit: da38ac6c79fe902ed0687afc73d731c95c6d491a
Component: engine
Existing tests assume that the entrypoint in a docker run command will be
split into multiple arguments, which is inconsistent with Linux. Fix the
tests depending on this behavior.
Signed-off-by: John Starks <jostarks@microsoft.com>
Upstream-commit: 86ab343c3e98ded1ee1b12f04396ae011a0e6de6
Component: engine
This pull request tries to diagnosis and fix the flaky test of
TestRunAttachFailedNoLeak. The test failed several times in
Docker CI but is very difficult to repeat even in CI.
This pull request first try to repeat the issue at the Jenkins
server with some diagnosis message added to the output in case
the test fails again.
Since the added ouputs will only be invoked when test fails,
it will not add any unnecessary content in normal situations.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 2d03c543888efbd634480ffc8ac5d2e09c8ea881
Component: engine
This fix tries to fix issues encountered when running a container with a hostname
that is longer than HOST_NAME_MAX(64).
Previously, `could not synchronise with container process` was generated as the
length of the regex check was missing.
This fix covers the length check so that a hostname that is longer than
HOST_NAME_MAX(64) will be given a correct error message.
Several unit tests cases and additional integration test cases are added as well.
This fix closes#21445.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: fa44b4e81ee87f1c2b39ad335a22795415c8cdf2
Component: engine
Allow --net=container and --ipc=container tests to run when user
namespaces are enabled.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: a1d84411178bdf72be83ad292543a1ea70aa3f69
Component: engine
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b0ac69b67ef79c6c937f84bee3df20a1924ad334
Component: engine
The issue comes from the implementation of volumeSplitN() where a
driver letter (`[a-zA-Z]:`) was assumed to follow either `:`, `/`,
or `\\`.
In Windows driver letter appears in two situations:
a. `^[a-zA-Z]:` (A colon followed by `^[a-zA-Z]:` is OK as colon is
the separator in volume option)
b. A string in the format like `\\?\C:\Windows\...` (UNC).
Therefore, a driver letter can only follow either a `:` or `\\`
This PR removes the condition of `/` before the driver letter so
that options like `-v /tmp/q:/foo` could be handled correctly. A
couple of tests has also been added.
This PR fixes#20122.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 800a7d513d3b80478a7996cb2c357b72f65e0b09
Component: engine
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: cb9aeb0413ca75bb3af7fa723a1f2e6b2bdbcb0e
Component: engine
The issue of the flaky test is because when the second container
starts, the first container in the detached mode may have only
been created and not yet entering the running state. So the
port 8000 might be used by the second container first.
This fix added a check to make sure the first container is already
in running state, before the second container is invoked.
This fix fixes#21247.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 1a9f5f4c69451c580595d67844f41937b3293069
Component: engine
Attach can hang forever if there is no data to send. This PR adds notification
of Attach goroutine about container stop.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 7bb815e2960c97c5cc0624566ac51581bdd884ab
Component: engine
Docker creates a UTS namespace by default, even with --net=host, so it
is reasonable to let the user set the hostname. Note that --hostname is
forbidden if the user specifies --uts=host.
Closes#12076
Signed-off-by: Jason Heiss <jheiss@aput.net>
Upstream-commit: 3f445e63b4568845f439c5d30a99ba10603b1938
Component: engine
Correct creation of a non-existing WORKDIR during docker build to use
remapped root uid/gid on mkdir
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 799a6b94ee661022d66f88a009ff58f08eb5a2c3
Component: engine
This fix tries to improve the time to run TestRunUnshareProc
in #19425.
In this fix goroutines are used to run test cases in parallel to
prevent the test from taking a long time to run.
As the majority of the execution time in the tests is from
multiple executions of 'docker run' and each of which takes
several seconds, parallel executions improve the test time.
Since each 'docker run' is independent, the purpose of the
test is not altered in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 526c2fe942107908fe324db2ecceee14b69cb191
Component: engine
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: a793564b2591035aec5412fbcbcccf220c773a4c
Component: engine
This will allow us to have a windows-to-linux CI, where the linux host
can be anywhere, connecting with TLS.
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: f4a1e3db998816e5fcb0df56c29519c488890464
Component: engine
Most of them were found and fixed by codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Upstream-commit: 2eee613326fb59fd168849618d14a9054a40f9f5
Component: engine
also fix wrong function comment
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Upstream-commit: d266142230bd041c8299eef329cf79a17f8f7478
Component: engine
