This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: a72b45dbec3caeb3237d1af5aedd04adeb083571
Component: engine
Also add docs to detach events
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 3accde6dee079fbde42f1928002bce43cb15833d
Component: engine
If we attach to a running container and stream is closed afterwards, we
can never be sure if the container is stopped or detached. Adding a new
type of `detach` event can explicitly notify client that container is
detached, so client will know that there's no need to wait for its exit
code and it can move forward to next step now.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 83ad006d4724929ccbde4bdf768374fad0eeab44
Component: engine
This PR adds support for user-defined health-check probes for Docker
containers. It adds a `HEALTHCHECK` instruction to the Dockerfile syntax plus
some corresponding "docker run" options. It can be used with a restart policy
to automatically restart a container if the check fails.
The `HEALTHCHECK` instruction has two forms:
* `HEALTHCHECK [OPTIONS] CMD command` (check container health by running a command inside the container)
* `HEALTHCHECK NONE` (disable any healthcheck inherited from the base image)
The `HEALTHCHECK` instruction tells Docker how to test a container to check that
it is still working. This can detect cases such as a web server that is stuck in
an infinite loop and unable to handle new connections, even though the server
process is still running.
When a container has a healthcheck specified, it has a _health status_ in
addition to its normal status. This status is initially `starting`. Whenever a
health check passes, it becomes `healthy` (whatever state it was previously in).
After a certain number of consecutive failures, it becomes `unhealthy`.
The options that can appear before `CMD` are:
* `--interval=DURATION` (default: `30s`)
* `--timeout=DURATION` (default: `30s`)
* `--retries=N` (default: `1`)
The health check will first run **interval** seconds after the container is
started, and then again **interval** seconds after each previous check completes.
If a single run of the check takes longer than **timeout** seconds then the check
is considered to have failed.
It takes **retries** consecutive failures of the health check for the container
to be considered `unhealthy`.
There can only be one `HEALTHCHECK` instruction in a Dockerfile. If you list
more than one then only the last `HEALTHCHECK` will take effect.
The command after the `CMD` keyword can be either a shell command (e.g. `HEALTHCHECK
CMD /bin/check-running`) or an _exec_ array (as with other Dockerfile commands;
see e.g. `ENTRYPOINT` for details).
The command's exit status indicates the health status of the container.
The possible values are:
- 0: success - the container is healthy and ready for use
- 1: unhealthy - the container is not working correctly
- 2: starting - the container is not ready for use yet, but is working correctly
If the probe returns 2 ("starting") when the container has already moved out of the
"starting" state then it is treated as "unhealthy" instead.
For example, to check every five minutes or so that a web-server is able to
serve the site's main page within three seconds:
HEALTHCHECK --interval=5m --timeout=3s \
CMD curl -f http://localhost/ || exit 1
To help debug failing probes, any output text (UTF-8 encoded) that the command writes
on stdout or stderr will be stored in the health status and can be queried with
`docker inspect`. Such output should be kept short (only the first 4096 bytes
are stored currently).
When the health status of a container changes, a `health_status` event is
generated with the new status. The health status is also displayed in the
`docker ps` output.
Signed-off-by: Thomas Leonard <thomas.leonard@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: b6c7becbfe1d76b1250f6d8e991e645e13808a9c
Component: engine
Using new methods from engine-api, that make it clearer which element is
required when consuming the API.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: b9c94b70bf2f703f260844b3862a61f93dee6337
Component: engine
When I use `docker exec -ti test ls`, I got error:
```
ERRO[0035] Handler for POST /v1.23/exec/9677ecd7aa9de96f8e9e667519ff266ad26a5be80e80021a997fff6084ed6d75/resize returned error: bad file descriptor
```
It's because `POST /exec/<id>/start` and
`POST /exec/<id>/resize` are asynchronous, it is
possible that exec process finishes and ternimal
is closed before resize. Then `console.Fd()` will
get a large invalid number and we got the above
error.
Fix it by adding synchronization between exec and
resize.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: dc56a76bc9f16b2d57b9d64822e305c1e787fcf0
Component: engine
Attach can hang forever if there is no data to send. This PR adds notification
of Attach goroutine about container stop.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 7bb815e2960c97c5cc0624566ac51581bdd884ab
Component: engine
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: a793564b2591035aec5412fbcbcccf220c773a4c
Component: engine
Currently if we exec a restarting container, client will fail silently,
and daemon will print error that container can't be found which is not a
very meaningful prompt to user.
This commit will stop user from exec a restarting container and gives
more explicit error message.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 1d2208fed90da9ab72ded3b1c65bb2a71b66ce93
Component: engine
Issue was caused when exec is tarted, exits, then stated again.
In this case, `Close` is called twice, which closes a channel twice.
Changes execConfig.ExitCode to a pointer so we can test if the it has
been set or not.
This allows us to return early when the exec has already been run.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 1a60a805bfabee729dbc833515cd0be439adb95b
Component: engine
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 15aa2a663b47b6126a66efefcadb64edfbffb9f5
Component: engine
This is a very docker concept that nobody elses need.
We only maintain it to keep the API backwards compatible.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: f9b857a200696b07b67e6a7f94ede32487f5649d
Component: engine
This is more aligned with `Daemon.GetImage` and less confusing.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: d7d512bb927023b76c3c01f54a3655ee7c341637
Component: engine
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 6bb0d1816acd8d4f7a542a6aac047da2b874f476
Component: engine
Remove double reference between containers and exec configurations by
keeping only the container id.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 9ca2e4e81cdb950f2b5958a7712153d1a6dd6e4c
Component: engine
This is a small configuration struct used in two scenarios:
1. To attach I/O pipes to a running containers.
2. To attach to execution processes inside running containers.
Although they are similar, keeping the struct in the same package
than exec and container can generate cycled dependencies if we
move any of them outside the daemon, like we want to do
with the container.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 3f5b8f712d693188b41b3d9b55e5e5213be48ef5
Component: engine
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 3b5fac462d21ca164b3778647420016315289034
Component: engine
Create a supervisor interface to let the container monitor to emit events.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: ca5ede2d0a23cb84cac3b863c363d0269e6438df
Component: engine
progressreader.Broadcaster becomes broadcaster.Buffered and
broadcastwriter.Writer becomes broadcaster.Unbuffered.
The package broadcastwriter is thus renamed to broadcaster.
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 2391233404e2e6892c79a24f31cc99715c086b21
Component: engine
Exec start was sending HTTP 500 for every error.
Fixed an error where pausing a container and then calling exec start
caused the daemon to freeze.
Updated API docs which incorrectly showed that a successful exec start
was an HTTP 201, in reality it is HTTP 200.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 2d43d93410c29cec87deb9cd940c3b2a8af5fbbb
Component: engine
Although having a request ID available throughout the codebase is very
valuable, the impact of requiring a Context as an argument to every
function in the codepath of an API request, is too significant and was
not properly understood at the time of the review.
Furthermore, mixing API-layer code with non-API-layer code makes the
latter usable only by API-layer code (one that has a notion of Context).
This reverts commit de4164043546d2b9ee3bf323dbc41f4979c84480, reversing
changes made to 7daeecd42d7bb112bfe01532c8c9a962bb0c7967.
Signed-off-by: Tibor Vass <tibor@docker.com>
Conflicts:
api/server/container.go
builder/internals.go
daemon/container_unix.go
daemon/create.go
Upstream-commit: b08f071e18043abe8ce15f56826d38dd26bedb78
Component: engine
This PR adds a "request ID" to each event generated, the 'docker events'
stream now looks like this:
```
2015-09-10T15:02:50.000000000-07:00 [reqid: c01e3534ddca] de7c5d4ca927253cf4e978ee9c4545161e406e9b5a14617efb52c658b249174a: (from ubuntu) create
```
Note the `[reqID: c01e3534ddca]` part, that's new.
Each HTTP request will generate its own unique ID. So, if you do a
`docker build` you'll see a series of events all with the same reqID.
This allow for log processing tools to determine which events are all related
to the same http request.
I didn't propigate the context to all possible funcs in the daemon,
I decided to just do the ones that needed it in order to get the reqID
into the events. I'd like to have people review this direction first, and
if we're ok with it then I'll make sure we're consistent about when
we pass around the context - IOW, make sure that all funcs at the same level
have a context passed in even if they don't call the log funcs - this will
ensure we're consistent w/o passing it around for all calls unnecessarily.
ping @icecrime @calavera @crosbymichael
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: 26b1064967d9fcefd4c35f60e96bf6d7c9a3b5f8
Component: engine
Using @mavenugo's patch for enabling the libcontainer pre-start hook to
be used for network namespace initialization (correcting the conflict
with user namespaces); updated the boolean check to the more generic
SupportsHooks() name, and fixed the hook state function signature.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: e148e763b8e7879855022690fdea88a6bf869195
Component: engine
- some method names were changed to have a 'Locking' suffix, as the
downcased versions already existed, and the existing functions simply
had locks around the already downcased version.
- deleting unused functions
- package comment
- magic numbers replaced by golang constants
- comments all over
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: abd72d4008dde7ee8249170d49eb4bc963c51e24
Component: engine
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
Upstream-commit: 03f65b3d0d66ccdc8b69a447b75508d594007600
Component: engine
Also cleans up some of the API side of exec.
Was writing the header twice (two different headers).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: f078f75bf25353720f28f9f1ea180374fe205302
Component: engine
This allow us to avoid entropy usage in non-crypto critical places.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 6bca8ec3c9ccc169c53b3d7060fe5c8ba8670aac
Component: engine
