Unfortunately, this is for now the only way to see the output of RUN commands when using buildkit.
It is equivalent to `DOCKER_BUILDKIT=1 docker build . 2>&1 | cat`
Signed-off-by: Tibor Vass <tibor@docker.com>
With this patch the following become true even with buildkit enabled:
1. `docker build -q .` only outputs the created image's sha256 ID.
2. `docker build -q .` outputs as if no `-q` was specified, if error occurred
3. `docker build . &> out` outputs JSON (instead of TTY characters)
Signed-off-by: Tibor Vass <tibor@docker.com>
This commit brings a more pedantic change in the following ambiguous case:
cat Dockerfile | docker build -f otherDockerfile -
The legacy builder does not error out and prefers the Dockerfile from stdin
while the buildkit-based one errors out.
Note that this is only in the case where stdin is a Dockerfile (not an archive)
Signed-off-by: Tibor Vass <tibor@docker.com>
* Kubernetes native filtering (server side) is an exact match, now filtering on name is made client-side to add prefix-matching
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
This patch adds annotations to mark the checkpoint commands as Linux only, which
hides them if the daemon is running a non-matching operating-system type;
Before:
docker
Usage: docker COMMAND
A self-sufficient runtime for containers
...
Management Commands:
config Manage Docker configs
container Manage containers
image Manage images
After:
docker
Usage: docker COMMAND
A self-sufficient runtime for containers
...
Management Commands:
checkpoint Manage checkpoints
config Manage Docker configs
container Manage containers
image Manage images
This change also prints errors when attempting to use checkpoint commands or
flags if the feature is not supported by the Daemon's operating system;
$ docker checkpoint --help
docker checkpoint is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint create --help
docker checkpoint create is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint ls --help
docker checkpoint ls is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint rm --help
docker checkpoint rm is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker container start --checkpoint=foo mycontainer
"--checkpoint" requires the Docker daemon to run on linux, but the Docker daemon is running on windows
$ docker container start --checkpoint-dir=/foo/bar mycontainer
"--checkpoint-dir" requires the Docker daemon to run on linux, but the Docker daemon is running on windows
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add validation for stack names to prevent an empty name resulting in _all_
stacks to be returned after filtering, which can result in removal of services
for all stacks if `--prune`, or `docker stack rm` is used.
Before this change;
docker stack deploy -c docker-compose.yml one
docker stack deploy -c docker-compose.yml two
docker stack deploy -c docker-compose.yml three
docker stack deploy -c docker-compose.yml --prune ''
Removing service one_web
Removing service two_web
Removing service three_web
After this change:
docker stack deploy -c docker-compose.yml one
docker stack deploy -c docker-compose.yml two
docker stack deploy -c docker-compose.yml three
docker stack deploy -c docker-compose.yml --prune ''
invalid stack name: ""
Other stack commands were updated as well:
Before this change;
docker stack deploy -c docker-compose.yml ''
Creating network _default
failed to create network _default: Error response from daemon: rpc error: code = InvalidArgument desc = name must be valid as a DNS name component
docker stack ps ''
nothing found in stack:
docker stack rm ''
Removing service one_web
Removing service three_web
Removing service two_web
After this change:
docker stack deploy -c docker-compose.yml ''
invalid stack name: ""
docker stack ps ''
invalid stack name: ""
docker stack rm ''
invalid stack name: ""
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Don't wrap the code to be slightly more readable
- Rename `getServiceFilter()` to `getStackServiceFilter()` to be
consistent with other helper functions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Add "kubernetes" struct in config file with "allNamespaces" option, to opt-out this behavior when set as "disabled"
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
`docker stack services --filter=label=foo=bar --filter=label=foo=baz my-stack` with Swarm gets handled as `filter on (a label named foo with value bar) AND (a label named foo with value baz).
This obviously yields an empty result set every time, but if and how this should be changed is out of scope here, so simply align Kubernetes with Swarm for now.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
Before this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Notice that the memory limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000
},
"Reservations": {
"NanoCPUs": 2000000000
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Notice that the CPU limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"MemoryBytes": 209715200
},
"Reservations": {
"MemoryBytes": 209715200
}
}
After this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Confirm that the CPU limits/reservations are updated, but memory limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Confirm that the Mempry limits/reservations are updated, but CPU limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
}
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
