This allows for easy extension of adding more parameters to existing
parameters list. Otherwise adding a single parameter changes code
at so many places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: b937aa8e6968d805527d163e6f477d496ceb88d7
Component: engine
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Fixed issue #23459
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Upstream-commit: fa710e504b0e3e51d4031790c18621b02dcd2600
Component: engine
We just introduced a new tunable dm.xfs_nospace_max_retries. But this tunable
will work only on new kernels where xfs supports this feature. On older
kernels xfs does not allow tuning this behavior.
There are two issues. First one is that if xfsSetNospaceRetries() fails,
it returns error but leaves the device activated and mounted. We should
be unmounting the device and deactivate it before returning.
Second issue is, if docker is started on older kernel, with
dm.xfs_nospace_max_retries specified, then docker will silently ignore the
fact that /sys file to tweak this behavior is not present and will continue.
But I think it might be better to fail container creation/start if kernel
does not support this feature.
This patch fixes it. After this patch, user will get an error like following
when container is run.
# docker run -ti fedora bash
docker: Error response from daemon: devmapper: user specified daemon option dm.xfs_nospace_max_retries but it does not seem to be supported on this system :open /sys/fs/xfs/dm-5/error/metadata/ENOSPC/max_retries: no such file or directory.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 6cc55dd65b363fe520c2ab29a9303f79afd4cadb
Component: engine
When xfs filesystem is being used on top of thin pool, xfs can get ENOSPC
errors from thin pool when thin pool is full. As of now xfs retries the
IO and keeps on retrying and does not give up. This can result in container
application being stuck for a very long time. In fact I have seen instances
of unkillable processes. So that means once thin pool is full and process
gets stuck, container can't be stopped/killed either and only option left
seems to be power recycle of the box.
In another instance, writer did not block but failed after a while. But
when I tried to exit/stop the container, unmounting xfs hanged and only
thing I could do was power cycle the machine.
Now upstream kernel has committed patches where it allows user space to
customize user space behavior in case of errors. One of the knobs is
max_retries, which specifies how many times an IO should be retried
when ENOSPC is encountered.
This patch sets provides a tunable knob (dm.xfs_nospace_max_retries) so
that user can specify value for max_retries and tune xfs behavior. If
one sets this value to 0, xfs will not retry IO when ENOSPC error is
encountered. It will instead give up and shutdown filesystem.
This knob can be useful if one is running into unkillable
processes/containers issue on top of xfs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 4f0017b9ad7dfa2e9dcdee69d000b98595893e60
Component: engine
Problem Description:
An example scenario that involves deferred removal
1. A new base image gets created (e.g. 'docker load -i'). The base device is activated and
mounted at some point in time during image creation.
2. While image creation is in progress, a privileged container is started
from another image and the host's mount name space is shared with this
container ('docker run --privileged -v /:/host').
3. Image creation completes and the base device gets unmounted. However,
as the privileged container still holds a reference on the base image
mount point, the base device cannot be removed right away. So it gets
flagged for deferred removal.
4. Next, the privileged container terminates and thus its reference to the
base image mount point gets released. The base device (which is flagged
for deferred removal) may now be cleaned up by the device-mapper. This
opens up an opportunity for a race between a 'kworker' thread (executing
the do_deferred_remove() function) and the Docker daemon (executing the
CreateSnapDevice() function).
This PR cancel the deferred removal, if the device is marked for it. And reschedule the
deferred removal later after the device is resumed successfully.
Signed-off-by: Shishir Mahajan <shishir.mahajan@redhat.com>
Upstream-commit: 0e633ee14aca32480ac4735675222c35f4e11d8c
Component: engine
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: a72b45dbec3caeb3237d1af5aedd04adeb083571
Component: engine
device Base should not exists on failure:
--- FAIL: TestDevmapperCreateBase (0.06s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-079240530/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.00s)
graphtest_unix.go:219: devmapper: device Base already
exists.
it should be:
--- FAIL: TestDevmapperCreateBase (0.25s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.13s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Snap/rootfs/a subdir:
no such file or directory
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Upstream-commit: b18062122d76a9f53822889874aa12103d491372
Component: engine
1) docker create / run / start: this would create a snapshot device and mounts it onto the filesystem.
So the first time GET operation is called. it will create the rootfs directory and return the path to rootfs
2) Now when I do docker commit. It will call the GET operation second time. This time the refcount will check
that the count > 1 (count=2). so the rootfs already exists, it will just return the path to rootfs.
Earlier it was just returning the mp: /var/lib/docker/devicemapper/mnt/{ID} and hence the inconsistent paths error.
Signed-off-by: Shishir Mahajan <shishir.mahajan@redhat.com>
Upstream-commit: 09d0720e2fb6e30ee018887399f353f93ac2d421
Component: engine
For things that we can check if they are mounted by using their fsmagic
we should use that and for others do it the slow way.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 1ba05cdb6ade7e3abd4c4c3221b5e27645460111
Component: engine
This makes sure fsdiff doesn't try to unmount things that shouldn't be.
**Note**: This is intended as a temporary solution to have as minor a
change as possible for 1.11.1. A bigger change will be required in order
to support container re-attach.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 7342060b070df67481f8da4f394a57cac1671d56
Component: engine
Right now there is no way to know what's the minimum free space threshold
daemon is applying. It would be good to export it through docker info and
then user knows what's the current value. Also this could be useful to
higher level management tools which can look at this value and setup their
own internal thresholds for image garbage collection etc.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 55a9b8123d7e89692b5c25c846cf6707a8ce463a
Component: engine
Since the layer store was introduced, the level above the graphdriver
now differentiates between read/write and read-only layers. This
distinction is useful for graphdrivers that need to take special steps
when creating a layer based on whether it is read-only or not.
Adding this parameter allows the graphdrivers to differentiate, which
in the case of the Windows graphdriver, removes our dependence on parsing
the id of the parent for "-init" in order to infer this information.
This will also set the stage for unblocking some of the layer store
unit tests in the next preview build of Windows.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Upstream-commit: ef5bfad3210a9e9c8b761f2c11c0c6289490ebff
Component: engine
Show a different message if a dynamic binary
is running, but doesn't have udev sync support.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: b8f38747e60eb76e19f08129ab27cb808d21c22a
Component: engine
Instead of implementing refcounts at each graphdriver, implement this in
the layer package which is what the engine actually interacts with now.
This means interacting directly with the graphdriver is no longer
explicitly safe with regard to Get/Put calls being refcounted.
In addition, with the containerd, layers may still be mounted after
a daemon restart since we will no longer explicitly kill containers when
we shutdown or startup engine.
Because of this ref counts would need to be repopulated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 65d79e3e5e537039b244afd7eda29e721a93d84f
Component: engine
Instead of implementing refcounts at each graphdriver, implement this in
the layer package which is what the engine actually interacts with now.
This means interacting directly with the graphdriver is no longer
explicitly safe with regard to Get/Put calls being refcounted.
In addition, with the containerd, layers may still be mounted after
a daemon restart since we will no longer explicitly kill containers when
we shutdown or startup engine.
Because of this ref counts would need to be repopulated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 563d0711f83952e561a0d7d5c48fef9810b4f010
Component: engine
We should be assigning value to minFreeMetadata instead of minFreeData. This
is copy/paste error.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 4141a00921e3ae814736249ec1806d5d35c8d46c
Component: engine
Now what we provide dynamic binaries for all plaforms,
we shouldn't try to run docker without udev sync support.
This change changes the previous warning to an Error,
unless the user explicitly overrides the warning, in
which case they're at their own risk.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: de641715105a116042ad9be5e1b2d1bb2962eb9c
Component: engine
Once thin pool gets full, bad things can happen. Especially in case of xfs
it is possible that xfs keeps on retrying IO infinitely (for certain kind
of IO) and container hangs.
One way to mitigate the problem is that once thin pool is about to get full,
start failing some of the docker operations like pulling new images or
creation of new containers. That way user will get warning ahead of time
and can try to rectify it by creating more free space in thin pool. This
can be done either by deleting existing images/containers or by adding more
free space to thin pool.
This patch adds a new option dm.min_free_space to devicemapper graph
driver. Say one specifies dm.min_free_space=10%. This means atleast
10% of data and metadata blocks should be free in pool before new device
creation is allowed, otherwise operation will fail.
By default min_free_space is 10%. User can change it by specifying
dm.min_free_space=X% on command line. A value of 0% will disable the
check.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 2e222f69b3486cf20039525a882ae4153b52f92c
Component: engine
Most of them were found and fixed by codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Upstream-commit: 2eee613326fb59fd168849618d14a9054a40f9f5
Component: engine
daemon option (--storage-opt dm.basesize) for increasing the base device size on daemon restart
Upstream-commit: 661d75f39858934c230c59a68d908ef203c34136
Component: engine
Right now if somebody has enabled deferred device deletion, then
deleteTransaction() returns success even if device could not be deleted. It
has been marked for deferred deletion. Right now we will mark device ID free
and potentially use it again when somebody tries to create new container. And
that's wrong. Device ID is not free yet. It will become free once devices
has actually been deleted by the goroutine later.
So move the location of call to markDeviceIDFree() to a place where we know
device actually got deleted and was not marked for deferred deletion.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 2dccb562dff79fef0f7a1d3b5f0e760e9d799d44
Component: engine
The loopback logic is not technically exclusive to the devicemapper
driver. This reorganizes the code such that the loopback code is usable
outside of the devicemapper package and driver.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: af597527121c0ad973e9d0ae4f9cf970da1513cc
Component: engine
After the very first init of the graph `docker info` correctly shows the
base fs type under `Backing Filesystem`. This information isn't stored
anywhere. After a restart (w/o erasing `/var/lib/docker`) `docker info`
shows an empty string under `Backing Filesystem`.
This patch records the base fs type after the first run in the metadata
or, to fix old devices that don't have this info in the metadata, just
probe the fs type of the base device at graph startup.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Upstream-commit: f22ee02c6d6bd16f2179e71366ec641a7d234e96
Component: engine
Closes#16667
Uses the prefix "devmapper:" for all the fmt and logrus error, debug, and info messages.
Signed-off-by: Chris Dituri <csdituri@gmail.com>
Upstream-commit: 0aa6ace6e6e819551d21ebdcaa0c5802f76d7603
Component: engine
This changes deivce to device in daemon, test and docs.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: 7c077c2c3443fdb9b13b7790bc96cdaa287cf381
Component: engine
