In particular, these two:
> daemon/daemon_unix.go:1129: Wrapf format %v reads arg #1, but call has 0 args
> daemon/kill.go:111: Warn call has possible formatting directive %s
and a few more.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 3737194b9f2875c10f3f2117c1816054ba0ff262
Component: engine
With the contianerd 1.0 migration we now have strongly typed errors that
we can check for process not found.
We also had some bad error checks looking for `ESRCH` which would only
be returned from `unix.Kill` and never from containerd even though we
were checking containerd responses for it.
Fixes some race conditions around process handling and our error checks
that could lead to errors that propagate up to the user that should not.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: e55bead518e4c72cdecf7de2e49db6c477cb58eb
Component: engine
- Fix OOM event updating healthchecks and persisting container state
without locks
- Fix healthchecks being updated without locks on container stop
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 972cb4978795029131697bd3b3746e321eec5c13
Component: engine
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: ebcb7d6b406fe50ea9a237c73004d75884184c33
Component: engine
When a container is paused, signals are sent once the container has been
unpaused.
Instead of forcing the user to unpause a container before they can ever
send a signal, allow the user to send the signals, and in the case of a
stop signal, automatically unpause the container afterwards.
This is much safer than unpausing the container first then sending a
signal (what a user is currently forced to do), as the container may be
paused for very good reasons and should not be unpaused except for
stopping.
Note that not even SIGKILL is possible while a process is paused,
but it is killed the instant it is unpaused.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: c3feb046b9b1eb606cc7e853d020799eb3800e0e
Component: engine
This fixes an issue where if a stop signal is set, and a user sends
SIGKILL, `container.ExitOnNext()` is not set, thus causing the container
to restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 114652ab86609e5c0cbfad84f642942b466a0596
Component: engine
This patch adds the untilRemoved option to the ContainerWait API which
allows the client to wait until the container is not only exited but
also removed.
This patch also adds some more CLI integration tests for waiting for a
created container and waiting with the new --until-removed flag.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Handle detach sequence in CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Update Container Wait Conditions
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Apply container wait changes to API 1.30
The set of changes to the containerWait API missed the cut for the
Docker 17.05 release (API version 1.29). This patch bumps the version
checks to use 1.30 instead.
This patch also makes a minor update to a testfile which was added to
the builder/dockerfile package.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Remove wait changes from CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address minor nits on wait changes
- Changed the name of the tty Proxy wrapper to `escapeProxy`
- Removed the unnecessary Error() method on container.State
- Fixes a typo in comment (repeated word)
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Use router.WithCancel in the containerWait handler
This handler previously added this functionality manually but now uses
the existing wrapper which does it for us.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Add WaitCondition constants to api/types/container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
- Update ContainerWait backend interface to not return pointer values
for container.StateStatus type.
- Updated container state's Wait() method comments to clarify that a
context MUST be used for cancelling the request, setting timeouts,
and to avoid goroutine leaks.
- Removed unnecessary buffering when making channels in the client's
ContainerWait methods.
- Renamed result and error channels in client's ContainerWait methods
to clarify that only a single result or error value would be sent
on the channel.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Move container.WaitCondition type to separate file
... to avoid conflict with swagger-generated code for API response
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Upstream-commit: 4921171587c09d0fcd8086a62a25813332f44112
Component: engine
This patch consolidates the two WaitStop and WaitWithContext methods
on the container.State type. Now there is a single method, Wait, which
takes a context and a bool specifying whether to wait for not just a
container exit but also removal.
The behavior has been changed slightly so that a wait call during a
Created state will not return immediately but instead wait for the
container to be started and then exited.
The interface has been changed to no longer block, but instead returns
a channel on which the caller can receive a *StateStatus value which
indicates the ExitCode or an error if there was one (like a context
timeout or state transition error).
These changes have been propagated through the rest of the deamon to
preserve all other existing behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Upstream-commit: cfdf84d5d04c8ee656e5c4ad3db993c258e52674
Component: engine
If a container sets a stop-signal, taking it into account to disable or
not the restart policy.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: d2e64247e6dfd3257a7d015890aa2f168ff643a0
Component: engine
When user try to restart a restarting container, docker client report
error: "container is already active", and container will be stopped
instead be restarted which is seriously wrong.
What's more critical is that when user try to start this container
again, it will always fail.
This error can also be reproduced with a `docker stop`+`docker start`.
And this commit will fix the bug.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: a705e166cf3bcca62543150c2b3f9bfeae45ecfa
Component: engine
This fixes an issue that caused the client to hang forever if the
process died before the code arrived to exit the `Kill` function.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 1a729c3dd8e84eef0a0b10cab24e88b768557482
Component: engine
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: a793564b2591035aec5412fbcbcccf220c773a4c
Component: engine
Currently some commands including `kill`, `pause`, `restart`, `rm`,
`rmi`, `stop`, `unpause`, `udpate`, `wait` will print a lot of error
message on client side, with a lot of redundant messages, this commit is
trying to remove the unuseful and redundant information for user.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 894266c1bbdfeb53bf278f3cb762945bac69e592
Component: engine
This is more aligned with `Daemon.GetImage` and less confusing.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: d7d512bb927023b76c3c01f54a3655ee7c341637
Component: engine
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 6bb0d1816acd8d4f7a542a6aac047da2b874f476
Component: engine
Create a supervisor interface to let the container monitor to emit events.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: ca5ede2d0a23cb84cac3b863c363d0269e6438df
Component: engine
Although having a request ID available throughout the codebase is very
valuable, the impact of requiring a Context as an argument to every
function in the codepath of an API request, is too significant and was
not properly understood at the time of the review.
Furthermore, mixing API-layer code with non-API-layer code makes the
latter usable only by API-layer code (one that has a notion of Context).
This reverts commit de4164043546d2b9ee3bf323dbc41f4979c84480, reversing
changes made to 7daeecd42d7bb112bfe01532c8c9a962bb0c7967.
Signed-off-by: Tibor Vass <tibor@docker.com>
Conflicts:
api/server/container.go
builder/internals.go
daemon/container_unix.go
daemon/create.go
Upstream-commit: b08f071e18043abe8ce15f56826d38dd26bedb78
Component: engine
This PR adds a "request ID" to each event generated, the 'docker events'
stream now looks like this:
```
2015-09-10T15:02:50.000000000-07:00 [reqid: c01e3534ddca] de7c5d4ca927253cf4e978ee9c4545161e406e9b5a14617efb52c658b249174a: (from ubuntu) create
```
Note the `[reqID: c01e3534ddca]` part, that's new.
Each HTTP request will generate its own unique ID. So, if you do a
`docker build` you'll see a series of events all with the same reqID.
This allow for log processing tools to determine which events are all related
to the same http request.
I didn't propigate the context to all possible funcs in the daemon,
I decided to just do the ones that needed it in order to get the reqID
into the events. I'd like to have people review this direction first, and
if we're ok with it then I'll make sure we're consistent about when
we pass around the context - IOW, make sure that all funcs at the same level
have a context passed in even if they don't call the log funcs - this will
ensure we're consistent w/o passing it around for all calls unnecessarily.
ping @icecrime @calavera @crosbymichael
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: 26b1064967d9fcefd4c35f60e96bf6d7c9a3b5f8
Component: engine
- some method names were changed to have a 'Locking' suffix, as the
downcased versions already existed, and the existing functions simply
had locks around the already downcased version.
- deleting unused functions
- package comment
- magic numbers replaced by golang constants
- comments all over
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: abd72d4008dde7ee8249170d49eb4bc963c51e24
Component: engine
Return an error when the container is stopped only in api versions
equal or greater than 1.20 (docker 1.8).
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 621e3d8587bbee86b4e36d0b7822662bfbedd76c
Component: engine
Move some calls to container.LogEvent down lower so that there's
less of a chance of them being missed. Also add a few more events
that appear to have been missed.
Added testcases for new events: commit, copy, resize, attach, rename, top
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: 8232312c1e705753d3db82dca3d9bb23e59c3b52
Component: engine
* Events subsystem merged from `server/events.go` and
`utils/jsonmessagepublisher.go` and moved to `events/events.go`
* Only public interface for this subsystem is engine jobs
* There is two new engine jobs - `log_event` and `subscribers_count`
* There is auxiliary function `container.LogEvent` for logging events for
containers
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
[solomon@docker.com: resolve merge conflicts]
Signed-off-by: Solomon Hykes <solomon@docker.com>
Upstream-commit: 8d056423f8c433927089bd7eb6bc97abbc1ed502
Component: engine
This is part of an effort to break apart the deprecated server/ package
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Upstream-commit: 8652830661f648d585a61479a88ada01010b7fc8
Component: engine
