This warning is better handled by the daemon, where applicable, as
the client does not have all information available to determine
if using a localhost / loopback-address for the DNS is possible.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The ResolveDefaultContext function was exported in [cli@f820766] to allow
(unit) testing, but did not document that it was only exported for this
purpose. The only external use of this function is in buildx, which uses
it in a unit test that can be implemented without this function.
This patch deprecates the function so that we can remove it.
[cli@f820766]: f820766f6a
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's just a wrapper around WithAPIClient, and not needed for this
test, which validates that "Initialize" properly creates the context
store, even if a client was already set;
3b26cfce8b
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for daemon-side auto-remove was added in API v1.25; on older
versions of the daemon, the client was responsible for removing the
container after it exited (see [moby@6dd8e10])
On API versions < 1.30, it used the events API for this purpose, and
would wait for a "die", "detach" or "detroy" events to know the container
exited, and could be removed or (when attached, but without a TTY) to
get the container's exit-status. (see [cli@38591f2]).
API version 1.24 (docker 1.12) is 9 Years old (July 29, 2016), and API
1.30 (docker 17.06) is 8 Years old (Jun 20, 2017), and long EOL. While
technically, a CLI could negotiate API 1.30 or older, this would only
be in cases where either API version negotiation failed, or the version
was explicitly overridden through `DOCKER_API_VERSION` for testing.
Either of those cases would be rare, and not worth the technical complexity
to support. This patch removes support for AutoRemove on API < 1.30.
[moby@6dd8e10]: 6dd8e10d6e
[cli@38591f2]: 38591f20d0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `VirtualSize` field was deprecated in [moby@1261fe6], and omitted / removed
in API v1.44 in [moby@913b0f5], and the corresponding formatting placeholder
was deprecated in [cli@f02301a].
This patch removes the formatting function, which also removes it from the
`docker image ls --format=json` output.
[moby@1261fe6]: 1261fe69a3
[moby@913b0f5]: 913b0f51ca
[cli@f02301a]: f02301ab5d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Relates to [cli@27b2797], which forked this type from the Moby API, and
[cli@aab947d], which fixed the deprecation comment.
This field is no longer used since Docker 1.11 (API version 1.23) through
[moby@aee260d] and [engine-api@9a9e468], and the fix of the deprecation
comment was included in the 28.4.0 release.
This patch removes the field.
[cli@27b2797]: 27b2797f7d
[cli@aab947d]: aab947de8f
[moby@aee260d]: aee260d4eb
[engine-api@9a9e468]: 9a9e468f50
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility was added in 9b83d5bbf9, but
was never used. Remove the utility, and rewrite the error returned to
implement the errdefs.NotFound interface, so that it can be detected
using the errdefs.IsNotFound() utility if needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit [cli@27b2797] forked the AuthConfig type from the API, and changed
existing code to do a direct cast / convert of the forked type to the API
type. This can cause issues if the API types diverges, such as the removal
of the Email field.
This patch explicitly maps each field to the corresponding API type, but
adds some TODOs, because various code-paths only included a subset of the
fields, which may be intentional for fields that were meant to be handled
on the daemon / registry-client only.
We should evaluate these conversions to make sure these fields should
be sent from the client or not (and possibly even removed from the API
type).
[cli@27b2797]: 27b2797f7d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function is a wrapper around apiClient.ImagePull and not directly
related to docker content trust; it just happens to also be called
when using content trust (through the trustedPull utility).
Move it together with the `runPull` function to separate it from
trust-related code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function is a wrapper around apiClient.ImagePull; the use of
trust.ImageRefAndAuth was out of convenience because it's also called
when using content trust (through the trustedPull utility).
Let's pull away the layers to separate it from trust code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This interface is used in tests to provide a dummy notary client,
but none of the tests require any arguments, so let's remove them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The IndexInfo was only used to detect if the target was an official
image, which we can deduct from the hostname. Adding some normalizing
just in case (but we should only get "docker.io" here).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker Hub's Notary service is being retired, and now produces
failures in most cases. Add a warning when attempting to use
it, pending full removal of trust;
https://www.docker.com/blog/retiring-docker-content-trust/
With this PR:
DOCKER_CONTENT_TRUST=1 docker pull -q hello-world
WARNING: Docker is retiring DCT for Docker Official Images (DOI).
For details, refer to https://docs.docker.com/go/dct-deprecation/
could not validate the path to a trusted root: unable to retrieve valid leaf certificates
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
All information needed can be deducted from the image reference, which
is used to create a indexInfo, repoInfo, and to resolve auth-config.
In some situations this may result in resolving the auth-config twice
after it already was resolved to an encoded auth-config.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Apply method was added when CLI options for constructing the CLI were
rewritten into functional options in [cli@7f207f3]. There was no mention
in the pull request of this method specifically, and this may have been
related to work being done elsewhere on compose-on-kubernetes or the
compose-cli plugin that may have needed options to modify the CLI config
after it was already initialized.
The CLI itself no longer depends on this method since [cli@133279f], and
there are no known external users. It was deprecated in [cli@24bfedf],
which is included in the 28.5.0 release, so we can remove it for 29.0.
[cli@7f207f3]: 7f207f3f95
[cli@133279f]: 133279fb0d
[cli@24bfedf]: 24bfedf3f8
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Apply command was deprecated in 24bfedf3f8,
and has no known external users, but we didn't remove it from the interface.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was used internally, but is no longer used.
This method was deprecated in 0270b2d6f7,
which was included in the 28.5.0 release, and has no known external users,
so removing it for 29.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These options were used internally as defaults for the constructor and
only impact commands implemented in the CLI itself.
They were deprecated in 40cdfc0d81, which
was included in the 28.5.0 release, so removing it for 29.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was used internally, but is no longer used. Users should check
the value of the `DOCKER_CONTENT_TRUST` environment variable instead.
This method was deprecated in 11d40488dd,
which was included in the 28.5.0 release, and has no known external users,
so removing it for 29.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Apply method was added when CLI options for constructing the CLI were
rewritten into functional options in [cli@7f207f3]. There was no mention
in the pull request of this method specifically, and this may have been
related to work being done elsewhere on compose-on-kubernetes or the
compose-cli plugin that may have needed options to modify the CLI config
after it was already initialized.
The CLI itself no longer depends on this method since [cli@133279f], and
the only known consumer (docker compose) no longer needs it since [cli@2711800]
and [cli@048e931].
This patch deprecates the method with the intent to remove it in a future
release.
[cli@7f207f3]: 7f207f3f95
[cli@133279f]: 133279fb0d
[cli@2711800]: 2711800430
[cli@048e931]: 048e931b42
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was used internally, but is no longer used. Users should check
the value of the `DOCKER_CONTENT_TRUST` environment variable instead.
There are no known external users of this method, so already removing it
from the Cli interface; this method will be removed in the next release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a follow-up to 7609dde8d0 and
3f5b1bdd32, which removed support for
DCT for build and plugin commands.
As these flags are just stubs, hidden by default and no longer functional,
they don't have to reflect the current state of DCT.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These options were used internally as defaults for the constructor and
only impact commands implemented in the CLI itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was used internally, but is no longer used. There are
no known users of this method, so already removing it from the Cli
interface.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add support to the `cli/command` package to accept a custom User
Agent to pass to the underlying client.
This is used as the `UpstreamClient` portion of the `User-Agent`
when the Moby daemon makes requests.
For example, pushing and pulling images with Compose might result
in the registry seeing a `User-Agent` value of:
```
docker/24.0.7 go/go1.20.10 git-commit/311b9ff kernel/6.5.13-linuxkit os/linux arch/arm64 UpstreamClient(docker-cli-plugin-compose/v2.24.0)
```
Signed-off-by: Milas Bowman <milas.bowman@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
