Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 44cab4a4ff05cb1e499fba19394aadb20fc887b8
Component: engine
This commit contains changes for docker:
* user.GetGroupFile to user.GetGroupPath docker/libcontainer#301
* Add systemd support for OOM docker/libcontainer#307
* Support for custom namespaces docker/libcontainer#279, docker/libcontainer#312
* Fixes#9699docker/libcontainer#308
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 50905a6d6ce2fdd1ab0c33ec0b7a26895e0cbeea
Component: engine
This changes the error message that is returned by the daemon when
a container-name already exists.
The old message suggests that containers can be renamed, which is
currently not possible.
To prevent confusion, the part "(or rename)" is removed from
the error-message.
Message before this change;
FATA[0000] Error response from daemon: Conflict, The name foobar is already assigned to 728ac36fb0ab. You have to delete (or rename) that container to be able to assign foobar to a container again.
Message after this change;
FATA[0000] Error response from daemon: Conflict. The name 'foobar' is already in use by container 728ac36fb0ab. You have to delete that container to be able to reuse that name.
Relates to: https://github.com/docker/docker/issues/3036
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: aa9c9569c29e3696c9427d2d66341c95fe076e4f
Component: engine
There has been a lot of discussion (issues 4242 and 5262) about making
`FROM scratch` either a special case or making `FROM` optional, implying
starting from an empty file system.
This patch makes the build command `FROM scratch` special cased from now on
and if used does not pull/set the the initial layer of the build to the ancient
image ID (511136ea..) but instead marks the build as having no base image. The
next command in the dockerfile will create an image with a parent image ID of "".
This means every image ever can now use one fewer layer!
This also makes the image name `scratch` a reserved name by the TagStore. You
will not be able to tag an image with this name from now on. If any users
currently have an image tagged as `scratch`, they will still be able to use that
image, but will not be able to tag a new image with that name.
Goodbye '511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158',
it was nice knowing you.
Fixes#4242
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Upstream-commit: 8936789919c5c8004f346f44a3452d1521818b60
Component: engine
To avoid an expensive call to archive.ChangesDirs() which walks two directory
trees and compares every entry, archive.ApplyLayer() has been extended to
also return the size of the layer changes.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Upstream-commit: 35a22c9e12c05e2a0a205964702ced78ea39d7a1
Component: engine
When we use the engine/env object we can run into a situation where
a string is passed in as the value but later on when we json serialize
the name/value pairs, because the string is made up of just numbers
it appears as an integer and not a string - meaning no quotes. This
can cause parsing issues for clients.
I tried to find all spots where we call env.Set() and the type of the
name being set might end up having a value that could look like an int
(like author). In those cases I switched it to use env.SetJson() instead
because that will wrap it in quotes.
One interesting thing to note about the testcase that I modified is that
the escaped quotes should have been there all along and we were incorrectly
letting it thru. If you look at the metadata stored for that resource you
can see the quotes were escaped and we lost them during the serialization
steps because of the env.Set() stuff. The use of env is probably not the
best way to do all of this.
Closes: #9602
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: d942c59b696d16def85f6b65ae65c176f66a5562
Component: engine
This adds the docker daemon's root directory to docker info when running
in debug mode. This allows the user to view the root directory where
docker is writing and storing state.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 654da4e151c449725b6996d47b7ff33767e87da9
Component: engine
Add the test case of this issue.
Docker-DCO-1.1-Signed-off-by: Chen Chao <cc272309126@gmail.com> (github: cc272309126)
Upstream-commit: 1bb02117db80e75f406f6c63d8d50680c1569019
Component: engine
Use transaction logic during device deletion and do rollback if transaction
is not complete. Following is the sequence of events.
- Open transaction and save to metafile
- Delete device from pool
- Delete device metadata file from disk
- Close Transaction
If docker crashes without closing transaction then rollback will take
place upon next docker start.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 17b75a21a667a27a9a27565ab282cd615dbdb66e
Component: engine
Finally this patch uses the notion of transaction for device or snapshot
device creation.
Following is sequence of event.
- Open a trasaction and save details in a file.
- Create a new device/snapshot device
- If a new device id is used, refresh transaction with new device id details.
- Create device metadata file
- Close transaction.
If docker crashes anywhere in between without closing transaction, then
upon next start, docker will figure out that there was a pending transaction
and it will roll back transaction. That is it will do following.
- Delete Device from pool
- Delete device metadata file
- Remove transaction file to mark no transaction is pending.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: c115c4aa45ba82f27859b0afba5724d437857879
Component: engine
Finally, we seem to have all the bits to keep track of all used device
Ids and find a free device Id to use when creating a new device. Start
using it.
Ideally we should completely move away from retry logic when pool returns
-EEXISTS. For now I have retained that logic and I simply output a warning.
When things are stable, we should be able to get rid of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: e28a419e1197bf50bbb378b02f0226c3115edeaa
Component: engine
Open code createDevice() and createSnapDevice() and move all the logic
in the caller.
This is a sheer code reorganization so that all device Id allocation
logic is in one function. That way in case of erros, one can easily
cleanup and mark device Id free again. (Later patches benefit from
it).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 14d0dd855ee1e7cd1a3185c3d5a00e7afccb5c43
Component: engine
Right now we are accessing devices.NextDeviceId directly and also
incrementing it at various places.
Instead provide a helper function which is responsile for
incrementing NextDeviceId and return next deviceId.
This is just code structuring. This will help later once we
convert this function to find a free device Id and it goes
through a bitmap of used/free device Ids.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: a44c23fe6604d1de59c64bbb9dc234c7c3dbede9
Component: engine
When docker starts, build a used/free Device Id map from the per
device meta files we already have. These meta files have the data
which device Ids are in use. Parse these files and mark device as
used in the map.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 39dc7829dea87d4be8e6e9b2a598fb354ebf4ba0
Component: engine
