It was used only by integration tests, which now gone.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 6ae377ffa0c106749db1bcd6cf158f8b0056dea8
Component: engine
Replaced github.com/docker/libcontainer with
github.com/opencontainers/runc/libcontaier.
Also I moved AppArmor profile generation to docker.
Main idea of this update is to fix mounting cgroups inside containers.
After updating docker on CI we can even remove dind.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: c86189d554ba14aa04b6314970d3699e5ddbf4de
Component: engine
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Upstream-commit: 921da495d24695dda66d3f58e78887dd0bc2402e
Component: engine
- Updated Dockerfile to satisfy libnetwork GOPATH requirements.
- Reworked daemon to allocate network resources using libnetwork.
- Reworked remove link code to also update network resources in libnetwork.
- Adjusted the exec driver command population to reflect libnetwork design.
- Adjusted the exec driver create command steps.
- Updated a few test cases to reflect the change in design.
- Removed the dns setup code from docker as resolv.conf is entirely managed
in libnetwork.
- Integrated with lxc exec driver.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Upstream-commit: d18919e304c240df84502cdcc5ed655d92d12d4f
Component: engine
We can use this to control block IO weight of a container.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: f133f11a7d25e6262558dd733afaa95ddd1c7aee
Component: engine
The `--userland-proxy` daemon flag makes it possible to rely on hairpin
NAT and additional iptables routes instead of userland proxy for port
publishing and inter-container communication.
Usage of the userland proxy remains the default as hairpin NAT is
unsupported by older kernels.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Upstream-commit: f42348e18f73d1d775d77ac75bc96466aae56d7c
Component: engine
Add cgroup support for disable OOM killer.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Upstream-commit: a4a924e1b6c50f0f02460489259d73468a6c282e
Component: engine
resource isolation policies on top of what native docker provides.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
Upstream-commit: 0b1e2b5a553565e99afd7ceda36beab098f506d0
Component: engine
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 837eec064d2d40a4d86acbc6f47fada8263e0d4c
Component: engine
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 409407091a7282d0c4086b71e86397e2d089ba13
Component: engine
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: 23feaaa240853c0e7f9817f8c2d272dd1c93ac3f
Component: engine
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: 497fc8876ede9924f61c0eee4dfadd71e5d9f537
Component: engine
Since the containers can handle the out of memory kernel kills gracefully, docker
will only provide out of memory information as an additional metadata as part of
container status.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
Upstream-commit: f96e04ffc7973e290653044cc86dbc1efb18276d
Component: engine
Right now, MAC addresses are randomly generated by the kernel when
creating the veth interfaces.
This causes different issues related to ARP, such as #4581, #5737 and #8269.
This change adds support for consistent MAC addresses, guaranteeing that
an IP address will always end up with the same MAC address, no matter
what.
Since IP addresses are already guaranteed to be unique by the
IPAllocator, MAC addresses will inherit this property as well for free.
Consistent mac addresses is also a requirement for stable networking (#8297)
since re-using the same IP address on a different MAC address triggers the ARP
issue.
Finally, this change makes the MAC address accessible through docker
inspect, which fixes#4033.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Upstream-commit: 88e21c6a75310da158bbee3a5fdc135697c93ba1
Component: engine
This also removes dead code in the native driver for a past feature that
was never fully implemented.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 32dca1a7b0e800d796e54fc8f253818ba64fa075
Component: engine
This is needed for persistent namespaces
Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com>
Upstream-commit: 623ebf203bc4f4e6ddefdd494f201a1401ab72a6
Component: engine
similar features in the future.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
Upstream-commit: 4aa5da278f49c889d43191f82ff42d3a95266d62
Component: engine
This changes the way the exec drivers work by not specifing a -driver
flag on reexec. For each of the exec drivers they register their own
functions that will be matched aginst the argv 0 on exec and called if
they match.
This also allows any functionality to be added to docker so that the
binary can be reexec'd and any type of function can be called. I moved
the flag parsing on docker exec to the specific initializers so that the
implementations do not bleed into one another. This also allows for
more flexability within reexec initializers to specify their own flags
and options.
Signed-off-by: Michael Crosby <michael@docker.com>
Upstream-commit: 73210671764fc3de133a627205582e069e1ff43d
Component: engine
This patch adds pause/unpause to the command line, api, and drivers
for use on containers. This is implemented using the cgroups/freeze
utility in libcontainer and lxc freeze/unfreeze.
Co-Authored-By: Eric Windisch <ewindisch@docker.com>
Co-Authored-By: Chris Alfonso <calfonso@redhat.com>
Docker-DCO-1.1-Signed-off-by: Ian Main <imain@redhat.com> (github: imain)
Upstream-commit: b054569cde788b2111ddbc4080b215dcda89f06e
Component: engine
This also makes sure that devices are pointers to avoid copies
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Upstream-commit: 69989b7c06b0ca6737e83ddf8fcfa2dfccc57a7c
Component: engine
