This was added in #36047 just as a way to make sure the tree is fully
unmounted on shutdown.
For ZFS this could be a breaking change since there was no unmount before.
Someone could have setup the zfs tree themselves. It would be better, if
we really do want the cleanup to actually the unpacked layers checking
for mounts rather than a blind recursive unmount of the root.
BTRFS does not use mounts and does not need to unmount anyway.
These was only an unmount to begin with because for some reason the
btrfs tree was being moutned with `private` propagation.
For the other graphdrivers that still have a recursive unmount here...
these were already being unmounted and performing the recursive unmount
shouldn't break anything. If anyone had anything mounted at the
graphdriver location it would have been unmounted on shutdown anyway.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 2fe4f888bee52b1f256d6fa5e20f9b061d30221c
Component: engine
The idea behind making the graphdrivers private is to prevent leaking
mounts into other namespaces.
Unfortunately this is not really what happens.
There is one case where this does work, and that is when the namespace
was created before the daemon's namespace.
However with systemd each system servie winds up with it's own mount
namespace. This causes a race betwen daemon startup and other system
services as to if the mount is actually private.
This also means there is a negative impact when other system services
are started while the daemon is running.
Basically there are too many things that the daemon does not have
control over (nor should it) to be able to protect against these kinds
of leakages. One thing is certain, setting the graphdriver roots to
private disconnects the mount ns heirarchy preventing propagation of
unmounts... new mounts are of course not propagated either, but the
behavior is racey (or just bad in the case of restarting services)... so
it's better to just be able to keep mount propagation in tact.
It also does not protect situations like `-v
/var/lib/docker:/var/lib/docker` where all mounts are recursively bound
into the container anyway.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 9803272f2db84df7955b16c0d847ad72cdc494d1
Component: engine
The fsmagic check was always performed on "data-root" (`/var/lib/docker`),
not on the storage-driver's home directory (e.g. `/var/lib/docker/<somedriver>`).
This caused detection to be done on the wrong filesystem in situations
where `/var/lib/docker/<somedriver>` was a mount, and a different
filesystem than `/var/lib/docker` itself.
This patch checks if the storage-driver's home directory exists, and only
falls back to `/var/lib/docker` if it doesn't exist.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: f9c8fa305e1501d8056f8744cb193a720aab0e13
Component: engine
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
Upstream-commit: 7a7357dae1bcccb17e9b2d4c7c8f5c025fce56ca
Component: engine
Changes most references of syscall to golang.org/x/sys/
Ones aren't changes include, Errno, Signal and SysProcAttr
as they haven't been implemented in /x/sys/.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
[s390x] switch utsname from unsigned to signed
per 33267e036f
char in s390x in the /x/sys/unix package is now signed, so
change the buildtags
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: 069fdc8a083cb1663e4f86fe3fd9b9a1aebc3e54
Component: engine
This commit is an extension of fix for 29325 based on the review comment.
In this commit, the quota size for btrfs is kept in `/var/lib/docker/btrfs/quotas`
so that a daemon restart keeps quota.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 16328cc207a493ecff0cabc11ebf51e958131418
Component: engine
This fix tries to address the issue raised in 29325 where
btrfs quota groups are not clean up even after containers
have been destroyed.
The reason for the issue is that btrfs quota groups have
to be explicitly destroyed. This fix fixes this issue.
This fix is tested manually in Ubuntu 16.04,
with steps specified in 29325.
This fix fixes 29325.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: e907c6418a2ae7754f69fede5897a7176250e8bd
Component: engine
Before this, if `forceRemove` is set the container data will be removed
no matter what, including if there are issues with removing container
on-disk state (rw layer, container root).
In practice this causes a lot of issues with leaked data sitting on
disk that users are not able to clean up themselves.
This is particularly a problem while the `EBUSY` errors on remove are so
prevalent. So for now let's not keep this behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 54dcbab25ea4771da303fa95e0c26f2d39487b49
Component: engine
This fix tries to address the issue raised in 29810
where btrfs subvolume removal failed when docker
is in an unprivileged lxc container. The failure
was caused by `Failed to rescan btrfs quota` with
`operation not permitted`.
However, if disk quota is not enabled, there is no
need to run a btrfs rescan at the first place.
This fix checks for `quotaEnabled` and only run btrfs
rescan if `quotaEnabled` is true.
This fix fixes 29810.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: b36e613d9f311e69387ccec2be16f8618fa1f558
Component: engine
This allows for easy extension of adding more parameters to existing
parameters list. Otherwise adding a single parameter changes code
at so many places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: b937aa8e6968d805527d163e6f477d496ceb88d7
Component: engine
Since the layer store was introduced, the level above the graphdriver
now differentiates between read/write and read-only layers. This
distinction is useful for graphdrivers that need to take special steps
when creating a layer based on whether it is read-only or not.
Adding this parameter allows the graphdrivers to differentiate, which
in the case of the Windows graphdriver, removes our dependence on parsing
the id of the parent for "-init" in order to infer this information.
This will also set the stage for unblocking some of the layer store
unit tests in the next preview build of Windows.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Upstream-commit: ef5bfad3210a9e9c8b761f2c11c0c6289490ebff
Component: engine
btrfs-progs-4.5 introduces device delete by devid
for this reason btrfs_ioctl_vol_args_v2's name was encapsulated
in a union
this patch is for setting btrfs_ioctl_vol_args_v2's name
using a C function in order to preserve compatibility
with all btrfs-progs versions
Signed-off-by: Julio Montes <imc.coder@gmail.com>
Upstream-commit: a038cccf88998814249a7a40b71a33a680e3f02f
Component: engine
For btrfs driver, in d.Create(), Get() of parentDir is called but not followed
by Put().
If we apply SElinux mount label, we need to mount btrfs subvolumes in d.Get(),
without a Put() would end up with a later Remove() failure on
"Device resourse is busy".
This calls the subvolume helper function directly in d.Create().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Upstream-commit: b2e27fee53c269f9659bdab66852eaba4ffbe9c7
Component: engine
Most storage drivers call graphdriver.GetFSMagic(home),
it is more clean to easy to maintain. So btrfs need to
adopt such change.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Upstream-commit: feda5d768439c6ecb8d3c82cee332724302e7cd2
Component: engine
Make sure btrfs mounted subvolumes are owned properly when a remapped
root exists (user namespaces are enabled, for example)
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 72e65e87935e5b82de76a6ef9b8160900f4724b7
Component: engine
Really fixing 2 things:
1. Panic when any error is detected while walking the btrfs graph dir on
removal due to no error check.
2. Nested subvolumes weren't actually being removed due to passing in
the wrong path
On point 2, for a path detected as a nested subvolume, we were calling
`subvolDelete("/path/to/subvol", "subvol")`, where the last part of the
path was duplicated due to a logic error, and as such actually causing
point #1 since `subvolDelete` joins the two arguemtns, and
`/path/to/subvol/subvol` (the joined version) doesn't exist.
Also adds a test for nested subvol delete.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: f9befce2d38614de3dfa474bc0f2e1b9937a8ca2
Component: engine
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Upstream-commit: 1716d497a420f0cd4e53a99535704c6d215e38c7
Component: engine
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 442b45628ee12ebd8e8bd08497896d5fa8eec4bd
Component: engine
Export image/container metadata stored in graph driver. Right now 3 fields
DeviceId, DeviceSize and DeviceName are being exported from devicemapper.
Other graph drivers can export fields as they see fit.
This data can be used to mount the thin device outside of docker and tools
can look into image/container and do some kind of inspection.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 407a626be62996cd6385ea4d80e669ab83f5f04d
Component: engine
We removed it, because upstream removed it. But now it will be coming
back, so work with it either way.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: b76e300b4cd6ce4446170c7170a2734f7994a6c1
Component: engine
They say we should only use the BTRFS_LIB_VERSION
They will no longer support this since it had to be managed manually
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: 3c136333af94c04eb59d7af9ee9be15c5bc6a129
Component: engine
There are a couple of drivers that swallow errors that may occur in
their Put() implementation.
This changes the signature of (*Driver).Put for all the drivers implemented.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Upstream-commit: 00fd63e55807c36fedf0878645dfec995fba381d
Component: engine
be default it is on, with build tags to disable the version info
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: 25154682a5cd57aa4fc3ef88baeee3ce1f204060
Component: engine
The logic is unrelated to graphdriver.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: 930a756ad55ad5f4e5e6391b41673743d7254c2b
Component: engine
Some graphdrivers are Differs and type assertions are made
in various places throughout the project. Differ offers some
convenience in generating/applying diffs of filesystem layers
but for most graphdrivers another code path is taken.
This patch brings all of the logic related to filesystem
diffs in one place, and simplifies the implementation of some
common types like Image, Daemon, and Container.
Signed-off-by: Josh Hawn <josh.hawn@docker.com>
Upstream-commit: dee6b481fe0da1d845261ffff2e610fb05898d3c
Component: engine
