On unix, merge secrets/configs handling. This is important because
configs can contain secrets (via templating) and potentially a config
could just simply have secret information "by accident" from the user.
This just make sure that configs are as secure as secrets and de-dups a
lot of code.
Generally this makes everything simpler and configs more secure.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: c02171802b788fb2d4d48bebcee2a57c8eabeeaa
Component: engine
This makes configs and secrets behavior identical.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 8e8f5f4457d8e1b02031576dbc18c903be4bcfb6
Component: engine
This is only for the case when dockerd has had to re-mount the daemon
root as shared.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 487c6c7e73dbb7871e80d75f176dd2a3539a2947
Component: engine
By default, if a user requests a bind mount it uses private propagation.
When the source path is a path within the daemon root this, along with
some other propagation values that the user can use, causes issues when
the daemon tries to remove a mountpoint because a container will then
have a private reference to that mount which prevents removal.
Unmouting with MNT_DETATCH can help this scenario on newer kernels, but
ultimately this is just covering up the problem and doesn't actually
free up the underlying resources until all references are destroyed.
This change does essentially 2 things:
1. Change the default propagation when unspecified to `rslave` when the
source path is within the daemon root path or a parent of the daemon
root (because everything is using rbinds).
2. Creates a validation error on create when the user tries to specify
an unacceptable propagation mode for these paths...
basically the only two acceptable modes are `rslave` and `rshared`.
In cases where we have used the new default propagation but the
underlying filesystem is not setup to handle it (fs must hvae at least
rshared propagation) instead of erroring out like we normally would,
this falls back to the old default mode of `private`, which preserves
backwards compatibility.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 589a0afa8cbe39b6512662fd1705873e2d236dd0
Component: engine
You don't need to resolve the symlink for the exec as long as the
process is to keep running during execution.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 59ec65cd8cec942cee6cbf2b8327ec57eb5078f0
Component: engine
It's a common scenario for admins and/or monitoring applications to
mount in the daemon root dir into a container. When doing so all mounts
get coppied into the container, often with private references.
This can prevent removal of a container due to the various mounts that
must be configured before a container is started (for example, for
shared /dev/shm, or secrets) being leaked into another namespace,
usually with private references.
This is particularly problematic on older kernels (e.g. RHEL < 7.4)
where a mount may be active in another namespace and attempting to
remove a mountpoint which is active in another namespace fails.
This change moves all container resource mounts into a common directory
so that the directory can be made unbindable.
What this does is prevents sub-mounts of this new directory from leaking
into other namespaces when mounted with `rbind`... which is how all
binds are handled for containers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: eaa5192856c1ad09614318e88030554b96bb6e81
Component: engine
Commit 7120976d74195 ("Implement none, private, and shareable ipc
modes") introduces a bug: if a user-specified mount for /dev/shm
is provided, its size is overriden by value of ShmSize.
A reproducer is simple:
docker run --rm
--mount type=tmpfs,dst=/dev/shm,tmpfs-size=100K \
alpine df /dev/shm
This commit is an attempt to fix the bug, as well as optimize things
a but and make the code easier to read.
https://github.com/moby/moby/issues/35271
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 31d30a985d99a0eef92116a22159727f5c332784
Component: engine
/dev is mounted on a tmpfs inside of a container. Processes inside of containers
some times need to create devices nodes, or to setup a socket that listens on /dev/log
Allowing these containers to run with the --readonly flag makes sense. Making a tmpfs
readonly does not add any security to the container, since there is plenty of places
where the container can write tmpfs content.
I have no idea why /dev was excluded.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Upstream-commit: 5f3bd2473ee2a1b9f37ba0130e934133d0e01f89
Component: engine
When runc is bind-mounting a particular path "with options", it has to
do so by first creating a bind-mount and the modifying the options of
said bind-mount via remount. However, in a user namespace, there are
restrictions on which flags you can change with a remount (due to
CL_UNPRIVILEGED being set in this instance). Docker historically has
ignored this, and as a result, internal Docker mounts (such as secrets)
haven't worked with --userns-remap. Fix this by preserving
CL_UNPRIVILEGED mount flags when Docker is spawning containers with user
namespaces enabled.
Ref: https://github.com/opencontainers/runc/pull/1603
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Upstream-commit: c0f883fdeeb2480970fb48fbcbc2a842aa5a90e8
Component: engine
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
Upstream-commit: 7a7357dae1bcccb17e9b2d4c7c8f5c025fce56ca
Component: engine
This also update:
- runc to 3f2f8b84a77f73d38244dd690525642a72156c64
- runtime-specs to v1.0.0
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Upstream-commit: 45d85c99139bbd16004bbedb7d5bac6a60264538
Component: engine
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: ebcb7d6b406fe50ea9a237c73004d75884184c33
Component: engine
Since the commit d88fe447df0e8 ("Add support for sharing /dev/shm/ and
/dev/mqueue between containers") container's /dev/shm is mounted on the
host first, then bind-mounted inside the container. This is done that
way in order to be able to share this container's IPC namespace
(and the /dev/shm mount point) with another container.
Unfortunately, this functionality breaks container checkpoint/restore
(even if IPC is not shared). Since /dev/shm is an external mount, its
contents is not saved by `criu checkpoint`, and so upon restore any
application that tries to access data under /dev/shm is severily
disappointed (which usually results in a fatal crash).
This commit solves the issue by introducing new IPC modes for containers
(in addition to 'host' and 'container:ID'). The new modes are:
- 'shareable': enables sharing this container's IPC with others
(this used to be the implicit default);
- 'private': disables sharing this container's IPC.
In 'private' mode, container's /dev/shm is truly mounted inside the
container, without any bind-mounting from the host, which solves the
issue.
While at it, let's also implement 'none' mode. The motivation, as
eloquently put by Justin Cormack, is:
> I wondered a while back about having a none shm mode, as currently it is
> not possible to have a totally unwriteable container as there is always
> a /dev/shm writeable mount. It is a bit of a niche case (and clearly
> should never be allowed to be daemon default) but it would be trivial to
> add now so maybe we should...
...so here's yet yet another mode:
- 'none': no /dev/shm mount inside the container (though it still
has its own private IPC namespace).
Now, to ultimately solve the abovementioned checkpoint/restore issue, we'd
need to make 'private' the default mode, but unfortunately it breaks the
backward compatibility. So, let's make the default container IPC mode
per-daemon configurable (with the built-in default set to 'shareable'
for now). The default can be changed either via a daemon CLI option
(--default-shm-mode) or a daemon.json configuration file parameter
of the same name.
Note one can only set either 'shareable' or 'private' IPC modes as a
daemon default (i.e. in this context 'host', 'container', or 'none'
do not make much sense).
Some other changes this patch introduces are:
1. A mount for /dev/shm is added to default OCI Linux spec.
2. IpcMode.Valid() is simplified to remove duplicated code that parsed
'container:ID' form. Note the old version used to check that ID does
not contain a semicolon -- this is no longer the case (tests are
modified accordingly). The motivation is we should either do a
proper check for container ID validity, or don't check it at all
(since it is checked in other places anyway). I chose the latter.
3. IpcMode.Container() is modified to not return container ID if the
mode value does not start with "container:", unifying the check to
be the same as in IpcMode.IsContainer().
3. IPC mode unit tests (runconfig/hostconfig_test.go) are modified
to add checks for newly added values.
[v2: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-51345997]
[v3: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-53902833]
[v4: addressed the case of upgrading from older daemon, in this case
container.HostConfig.IpcMode is unset and this is valid]
[v5: document old and new IpcMode values in api/swagger.yaml]
[v6: add the 'none' mode, changelog entry to docs/api/version-history.md]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 7120976d74195a60334c688a061270a4d95f9aeb
Component: engine
There is no case which would resolve in this error. The root user always exists, and if the id maps are empty, the default value of 0 is correct.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Upstream-commit: 93fbdb69acf9248283a91a1c5c6ea24711c26eda
Component: engine
This adds support to specify custom container paths for secrets.
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
Upstream-commit: 67d282a5c95ca1d25cd4e9c688e89191f662d448
Component: engine
- Moved DefaultInitBinary from daemon/daemon.go to
daemon/config/config.go since it's a daemon config and is referred in
config package files.
- Added condition in GetInitPath to check for any explicitly configured
DefaultInitBinary. If not, the default value of DefaultInitBinary is
returned.
- Changed all references of DefaultInitBinary to refer to the variable
from new location.
- Added TestCommonUnixGetInitPath to test for the various values of
GetInitPath.
Fixes#32314
Signed-off-by: Sunny Gogoi <indiasuny000@gmail.com>
Upstream-commit: 17b128876028022991e2dbcb2cc402cc81b451e5
Component: engine
This introduce a new `--device-cgroup-rule` flag that allow a user to
add one or more entry to the container cgroup device `devices.allow`
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Upstream-commit: 1756af6fafabd9197feb56c0324e49dd7d30b11f
Component: engine
In certain cases (unattended upgrades), system services can disable
loaded AppArmor profiles. However, since /etc being read-only is a
supported setup we cannot just write a copy of the profile to
/etc/apparmor.d.
Instead, dynamically load the docker-default AppArmor profile if a
container is started with that profile set. This code will short-cut if
the profile is already loaded.
Fixes: 2f7596aaef3a ("apparmor: do not save profile to /etc/apparmor.d")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Upstream-commit: 567ef8e7858ca4f282f598ba1f5a951cbad39e83
Component: engine
- use /secrets for swarm secret create route
- do not specify omitempty for secret and secret reference
- simplify lookup for secret ids
- do not use pointer for secret grpc conversion
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
Upstream-commit: 189f89301e0abfee32447f2ca23dacd3a96de06d
Component: engine
- fix lint issues
- use errors pkg for wrapping errors
- cleanup on error when setting up secrets mount
- fix erroneous import
- remove unneeded switch for secret reference mode
- return single mount for secrets instead of slice
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
Upstream-commit: 857e60c2f943a09e3ec0ac0f236821b797935900
Component: engine
containers may specify these cgroup values at runtime. This will allow
processes to change their priority to real-time within the container
when CONFIG_RT_GROUP_SCHED is enabled in the kernel. See #22380.
Also added sanity checks for the new --cpu-rt-runtime and --cpu-rt-period
flags to ensure that that the kernel supports these features and that
runtime is not greater than period.
Daemon will support a --cpu-rt-runtime flag to initialize the parent
cgroup on startup, this prevents the administrator from alotting runtime
to docker after each restart.
There are additional checks that could be added but maybe too far? Check
parent cgroups to ensure values are <= parent, inspecting rtprio ulimit
and issuing a warning.
Signed-off-by: Erik St. Martin <alakriti@gmail.com>
Upstream-commit: 56f77d5ade945b3b8816a6c8acb328b7c6dce9a7
Component: engine
