New driver options:
- `splunk-gzip` - gzip compress all requests to Splunk HEC
(enabled by default)
- `splunk-gzip-level` - change compression level.
Messages are sent in batches by 1000, with frequency of 5 seconds.
Maximum buffer is 10,000 events. If HEC will not be available, Splunk
Logging Driver will keep retrying while it can hold messages in buffer.
Added unit tests for driver.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
Upstream-commit: 4907cc7793cf469fc2d6fc0f842d08bd045da569
Component: engine
Syslog Driver: RFC 5425 Message Framing should be used only when protocol is TCP+TLS
Upstream-commit: 15f3d060ace45384ed5f549eecf2bc8919a82f7f
Component: engine
`--log-opt splunk-format=inline|json|raw` allows to change how logging
driver sends data to Splunk, where
`inline` - default value, format used before, message is injected as a
line in JSON payload
`json` - driver will try to parse each line as a JSON object and embed it
inside of the JSON payload
`raw` - driver will send Raw payload instead of JSON, tag and attributes
will be prefixed before the message
`--log-opt splunk-verify-connection=true|false` - allows to skip
verification for Splunk Url
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
Upstream-commit: 603fd0831513257bc26d20ca1f64efcc4965eae6
Component: engine
Fixes a race where the log reader would get events for both an actual
rotation as we from fsnotify (`fsnotify.Rename`).
This issue becomes extremely apparent when rotations are fast, for
example:
```
$ docker run -d --name test --log-opt max-size=1 --log-opt max-file=2
busybox sh -c 'while true; do echo hello; usleep 100000; done'
```
With this change the log reader for jsonlogs can handle rotations that
happen as above.
Instead of listening for both fs events AND rotation events
simultaneously, potentially meaning we see 2 rotations for only a single
rotation due to channel buffering, only listen for fs events (like
`Rename`) and then wait to be notified about rotation by the logger.
This makes sure that we don't see 2 rotations for 1, and that we don't
start trying to read until the logger is actually ready for us to.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 84e60a7e10278e3acd2b783d0e6955dc5198b57c
Component: engine
This fix tries to address the issue raised in #23528 where
docker labels caused journald log error because journald
has special requirements on field names.
This fix addresses this issue by sanitize the labels per
requirements of journald.
Additional unit tests have been added to cover the changes.
This fix fixes#23528.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 9528ea930cdb90f906230a6d4cab179001255927
Component: engine
it's actually not okay to do such trick from multiple goroutines
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 378f0657f963fa6c854643571e4fe83628466c01
Component: engine
If "docker logs" was used on an offline container, the logger is leaked, leaving it up to the finalizer to close the file handle, which could block removal of the container. Further, the json file logger could leak an open handle if the logs are read without follow due to an early return without a close. This change addresses both cases.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Upstream-commit: 54f11b84d218c1a7ff4ab4e2148819265da213bc
Component: engine
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
Upstream-commit: 513ec73831269947d38a644c278ce3cac36783b2
Component: engine
Add a benchmark for measuring how the logger.Copier implementation
handles logged lines of sizes ranging up from 64 bytes to 256KB.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Upstream-commit: af439c7a8da878450d0e5583935a1c4208fa92ad
Component: engine
Use the same default tag value for all loggers that support tags.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: f900e1cf47f6a18eaa4ce438cc8fc0623f2eaec0
Component: engine
When told to read additional attributes from logs that we've sent to the
journal, pull out all of the non-trusted, non-user fields that we didn't
hard-code ourselves. More of PR#20726 and PR#21889.
When reading entries in the journald log reader, set the time zone on
timestamps that we read to UTC, so that we send UTC values to the client
instead of values that are local to whatever timezone dockerd happens to
be running in.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
Upstream-commit: 0da0a8f9dae35e6a9cb63b9e4a3285e24c001af3
Component: engine
Now daemon/logger.Copier does not use ContainerID
Addendum to #23141
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Upstream-commit: 518709a87e04f55babc5162861aa4ba9a423f0c8
Component: engine
Log drivers are instantiated on a per-container basis, and passed the
container ID (along with other information) when they're initialized.
Drivers that care about that value are caching the value that they're
passed when they're initialized and using it in favor of the value
contained in Message structures that are passed to them, so the field in
Messages is unused, so we remove it.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Upstream-commit: 7772d270c06cc6c26359b556c95563bae31c1038
Component: engine
This fix tries to fix build errors caused by updating
aws-sdk-go to v1.1.30.
This fix fixes#22961.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 46ea8ff75d03999e08f77f526e93d8489eb0fabd
Component: engine
This fix tries to address the issue raised in #22358 where syslog's
message tag always starts with `docker/` and can not be removed
by changing the log tag templates.
The issue is that syslog driver hardcodes `path.Base(os.Args[0])`
as the prefix, which is the binary file name of the daemon (`dockerd`).
This could be an issue for certain situations (e.g., #22358) where
user may prefer not to have a dedicated prefix in syslog messages.
There is no way to override this behavior in the current verison of
the docker.
This fix tries to address this issue without making changes in the
default behavior of the syslog driver. An additional
`{{.DaemonName}}` has been introduced in the syslog tag. This is
assigned as the `docker` when daemon starts. The default log tag
template has also been changed from
`path.Base(os.Args[0]) + "/{{.ID}}"` to `{{.DaemonName}}/{{.ID}}`.
Therefore, there is no behavior changes when log-tag is not provided.
In order to be consistent, the default log tag for fluentd has been
changed from `docker.{{.ID}}` to `{{DaemonName}}.{{.ID}}` as well.
The documentation for log-tag has been updated to reflect this change.
Additional test cases have been added to cover changes in this fix.
This fix fixes#22358.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 38c49d99870c762a0ea23dadda414f9cc59071b6
Component: engine
Since 1.9, driver specific log tag options
`syslog-tag`
`gelf-tag`
`fluentd-tag`
have been deprecated in favor of the generic tag
option which is standard across different logging
drivers.
This fix removed the deprecated driver specific
log tag options of `syslog-tag`, `gelf-tag`,
`fluentd-tag` for 1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: a20b02b9158c283402d174926c84e657e53b17a1
Component: engine
The jsonlog logger currently allows specifying envs and labels that
should be propagated to the log message, however there has been no way
to read that back.
This adds a new API option to enable inserting these attrs back to the
log reader.
With timestamps, this looks like so:
```
92016-04-08T15:28:09.835913720Z foo=bar,hello=world hello
```
The extra attrs are comma separated before the log message but after
timestamps.
Without timestaps it looks like so:
```
foo=bar,hello=world hello
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: bd9d14a07b9f1c82625dc8483245caf3fa7fe9e6
Component: engine
This fix tries to add an additional syslog-format of `rfc5424micro` which follows
the same as rfc5424 except that it use microsecond resolution for timestamp. The
purpose is to solve the issue raised in #21793 where log events might lose its
ordering if happens on the same second.
The timestamp field in rfc5424 is derived from rfc3339, though the maximium
resolution is limited to "TIME-SECFRAC" which is 6 (microsecond resolution).
The appropriate documentation (`docs/admin/logging/overview.md`) has been updated
to reflect the change in this fix.
This fix adds a unit test to cover the newly introduced format.
This fix fixes#21793.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 7581cf96fbe0cddacf246f2982634190ebe455c9
Component: engine
2.change schema into scheme in docs and some annotations.
Signed-off-by: allencloud <allen.sun@daocloud.io>
Upstream-commit: 28d3c22e55259281c70fd90780a1b0d388450ddf
Component: engine
Following a journal log almost always requires a descriptor to be
allocated. In cases where we're running out of descriptors, this means
we might get stuck while attempting to start following the journal, at a
point where it's too late to report it to the client and clean up
easily. The journal reading context will cache the value once it's
allocated, so here we move the check earlier, so that we can detect a
problem when we can still report it cleanly.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Upstream-commit: ab62ecf393b92d1e644f82c4711b6618b7c572a5
Component: engine
When we set up to start following a journal, if we get error results
from sd_journal_get_fd() or sd_journal_get_events() that prevent us from
following the journal, report the error instead of just mysteriously
failing.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
Upstream-commit: 8d597d25a86c608e2e1e4ef150d7e9eb68306bc0
Component: engine
