Sorting by mount point length can be implemented in a more
straightforward fashion since Go 1.8 introduced sort.Slice()
with an ability to provide a less() function in place.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: a00310b54c0cdcafb402aeea92feca865da9fdf3
Component: engine
This makes `go test .` to pass if run as non-root user, skipping
those tests that require superuser privileges (for `mount`).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 4aae77602a7540b4f977572f3fbdc0891ac57cab
Component: engine
Before this change, volume management was relying on the fact that
everything the plugin mounts is visible on the host within the plugin's
rootfs. In practice this caused some issues with mount leaks, so we
changed the behavior such that mounts are not visible on the plugin's
rootfs, but available outside of it, which breaks volume management.
To fix the issue, allow the plugin to scope the path correctly rather
than assuming that everything is visible in `p.Rootfs`.
In practice this is just scoping the `PropagatedMount` paths to the
correct host path.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 0e5eaf8ee32662182147f5f62c1bfebef66f5c47
Component: engine
The plugin spec says that plugins can live in one of:
- /var/run/docker/plugins/<name>.sock
- /var/run/docker/plugins/<name>/<name>.sock
- /etc/docker/plugins/<name>.[json,spec]
- /etc/docker/plugins/<name>/<name>.<json,spec>
- /usr/lib/docker/plugins/<name>.<json,spec>
- /usr/lib/docker/plugins/<name>/<name>.<json,spec>
However, the plugin scanner which is used by the volume list API was
doing `filepath.Walk`, which will walk the entire tree for each of the
supported paths.
This means that even v2 plugins in
`/var/run/docker/plugins/<id>/<name>.sock` were being detected as a v1
plugin.
When the v1 plugin loader tried to load such a plugin it would log an
error that it couldn't find it because it doesn't match one of the
supported patterns... e.g. when in a subdir, the subdir name must match
the plugin name for the socket.
There is no behavior change as the error is only on the `Scan()` call,
which is passing names to the plugin registry when someone calls the
volume list API.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b27f70d45a0fbb744c17dda02f597ffa6a47d4d9
Component: engine
Signed-off-by: John Howard <jhoward@microsoft.com>
The re-coalesces the daemon stores which were split as part of the
original LCOW implementation.
This is part of the work discussed in https://github.com/moby/moby/issues/34617,
in particular see the document linked to in that issue.
Upstream-commit: ce8e529e182bde057cdfafded62c210b7293b8ba
Component: engine
This protects the daemon from volume plugins that are slow or
deadlocked.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b15f8d2d4f054a87052a7065c50441f7e8479fa9
Component: engine
The Golang built-in gzip library is serialized, and fairly slow
at decompressing. It also only decompresses on demand, versus
pipelining decompression.
This change switches to using the pigz external command
for gzip decompression, as opposed to using the built-in
golang one. This code is not vendored, but will be used
if it autodetected as part of the OS.
This also switches to using context, versus a manually
managed channel to manage cancellations, and synchronization.
There is a little bit of weirdness around manually having
to cancel in the error cases.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Upstream-commit: fd35494a251a497c359f706f61f33e689e2af678
Component: engine
When a recursive unmount fails, don't bother parsing the mount table to check
if what we expected to be a mountpoint is still mounted. `EINVAL` is
returned when you try to unmount something that is not a mountpoint, the
other cases of `EINVAL` would not apply here unless everything is just
wrong. Parsing the mount table over and over is relatively expensive,
especially in the code path that it's in.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: dd2108766017c13a19bdbfd1a56cd1358580e0bb
Component: engine
if thin device is deteled and the metadata exists, you can not
delete related containers. This patch ignore Nodata errors for
thin device deletion
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Upstream-commit: 8451d03d8ef7457f82112179cd3e300c05a08d3d
Component: engine
Files that are suffixed with `_linux.go` or `_windows.go` are
already only built on Linux / Windows, so these build-tags
were redundant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 6ed1163c98703f8dd0693cecbadc84d2cda811c3
Component: engine
Close pipe in chrootarchive.invokeUnpack when cmd.Start()/json.NewEncoder failed
Upstream-commit: cefb33700cf0931a6e3f9ea2cb0a122148d10e49
Component: engine
This subtle bug keeps lurking in because error checking for `Mkdir()`
and `MkdirAll()` is slightly different wrt to `EEXIST`/`IsExist`:
- for `Mkdir()`, `IsExist` error should (usually) be ignored
(unless you want to make sure directory was not there before)
as it means "the destination directory was already there"
- for `MkdirAll()`, `IsExist` error should NEVER be ignored.
Mostly, this commit just removes ignoring the IsExist error, as it
should not be ignored.
Also, there are a couple of cases then IsExist is handled as
"directory already exist" which is wrong. As a result, some code
that never worked as intended is now removed.
NOTE that `idtools.MkdirAndChown()` behaves like `os.MkdirAll()`
rather than `os.Mkdir()` -- so its description is amended accordingly,
and its usage is handled as such (i.e. IsExist error is not ignored).
For more details, a quote from my runc commit 6f82d4b (July 2015):
TL;DR: check for IsExist(err) after a failed MkdirAll() is both
redundant and wrong -- so two reasons to remove it.
Quoting MkdirAll documentation:
> MkdirAll creates a directory named path, along with any necessary
> parents, and returns nil, or else returns an error. If path
> is already a directory, MkdirAll does nothing and returns nil.
This means two things:
1. If a directory to be created already exists, no error is
returned.
2. If the error returned is IsExist (EEXIST), it means there exists
a non-directory with the same name as MkdirAll need to use for
directory. Example: we want to MkdirAll("a/b"), but file "a"
(or "a/b") already exists, so MkdirAll fails.
The above is a theory, based on quoted documentation and my UNIX
knowledge.
3. In practice, though, current MkdirAll implementation [1] returns
ENOTDIR in most of cases described in #2, with the exception when
there is a race between MkdirAll and someone else creating the
last component of MkdirAll argument as a file. In this very case
MkdirAll() will indeed return EEXIST.
Because of #1, IsExist check after MkdirAll is not needed.
Because of #2 and #3, ignoring IsExist error is just plain wrong,
as directory we require is not created. It's cleaner to report
the error now.
Note this error is all over the tree, I guess due to copy-paste,
or trying to follow the same usage pattern as for Mkdir(),
or some not quite correct examples on the Internet.
[1] https://github.com/golang/go/blob/f9ed2f75/src/os/path.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 516010e92d56cfcd6d1e343bdc02b6f04bc43039
Component: engine
Standard golang's `os.MkdirAll()` function returns "not a directory" error
in case a directory to be created already exists but is not a directory
(e.g. a file). Our own `idtools.MkdirAs*()` functions do not replicate
the behavior.
This is a bug since all `Mkdir()`-like functions are expected to ensure
the required directory exists and is indeed a directory, and return an
error otherwise.
As the code is using our in-house `system.Stat()` call returning a type
which is incompatible with that of golang's `os.Stat()`, I had to amend
the `system` package with `IsDir()`.
A test case is also provided.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 2aa13f86f0c9cf3ed58a648a7b1506d4b06f3589
Component: engine
