This ensures that all log plugins are registered when the log validator
is run.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b0b9a25e7e60abbe143e149ccaaf4dfb62044016
Component: engine
When tailing a container log, if the log file is empty it will cause the
log stream to abort with an unexpected `EOF`.
Note that this only applies to the "current" log file as rotated files
cannot be empty.
This fix just skips adding the "current" file the log tail if it is
empty.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: f40860c5f3d3575629d4a932207e866c1fea625d
Component: engine
Since commit e9b9e4ace294230c6b8eb has landed, there is a chance that
container.RWLayer is nil (due to some half-removed container). Let's
check the pointer before use to avoid any potential nil pointer
dereferences, resulting in a daemon crash.
Note that even without the abovementioned commit, it's better to perform
an extra check (even it's totally redundant) rather than to have a
possibility of a daemon crash. In other words, better be safe than
sorry.
[v2: add a test case for daemon.getInspectData]
[v3: add a check for container.Dead and a special error for the case]
Fixes: e9b9e4ace294230c6b8eb
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 195893d38160c0893e326b8674e05ef6714aeaa4
Component: engine
The goal of this refactor is to make it easier to integrate buildkit
and containerd snapshotters.
Commit is used from two places (api and build), each calls it
with distinct arguments. Refactored to pull out the common commit
logic and provide different interfaces for each consumer.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Upstream-commit: daff039049aea6e19a4bda1df2834d14b4198bc0
Component: engine
This was added in #36047 just as a way to make sure the tree is fully
unmounted on shutdown.
For ZFS this could be a breaking change since there was no unmount before.
Someone could have setup the zfs tree themselves. It would be better, if
we really do want the cleanup to actually the unpacked layers checking
for mounts rather than a blind recursive unmount of the root.
BTRFS does not use mounts and does not need to unmount anyway.
These was only an unmount to begin with because for some reason the
btrfs tree was being moutned with `private` propagation.
For the other graphdrivers that still have a recursive unmount here...
these were already being unmounted and performing the recursive unmount
shouldn't break anything. If anyone had anything mounted at the
graphdriver location it would have been unmounted on shutdown anyway.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 2fe4f888bee52b1f256d6fa5e20f9b061d30221c
Component: engine
By default, if a user requests a bind mount it uses private propagation.
When the source path is a path within the daemon root this, along with
some other propagation values that the user can use, causes issues when
the daemon tries to remove a mountpoint because a container will then
have a private reference to that mount which prevents removal.
Unmouting with MNT_DETATCH can help this scenario on newer kernels, but
ultimately this is just covering up the problem and doesn't actually
free up the underlying resources until all references are destroyed.
This change does essentially 2 things:
1. Change the default propagation when unspecified to `rslave` when the
source path is within the daemon root path or a parent of the daemon
root (because everything is using rbinds).
2. Creates a validation error on create when the user tries to specify
an unacceptable propagation mode for these paths...
basically the only two acceptable modes are `rslave` and `rshared`.
In cases where we have used the new default propagation but the
underlying filesystem is not setup to handle it (fs must hvae at least
rshared propagation) instead of erroring out like we normally would,
this falls back to the old default mode of `private`, which preserves
backwards compatibility.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 589a0afa8cbe39b6512662fd1705873e2d236dd0
Component: engine
Current implementaion of docke daemon doesn't pass down the
`--oom-kill-disable` option specified by the end user to the containerd
when spawning a new docker instance with help from `runc` component, which
results in the `--oom-kill-disable` doesn't work no matter the flag is `true`
or `false`.
This PR will fix this issue reported by #36090
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Upstream-commit: 44b074d199de84b9af8cc94005fbed4f76bd9ab8
Component: engine
Attachable networks are networks created on the cluster which can then
be attached to by non-swarm containers. These networks are lazily
created on the node that wants to attach to that network.
When no container is currently attached to one of these networks on a
node, and then multiple containers which want that network are started
concurrently, this can cause a race condition in the network attachment
where essentially we try to attach the same network to the node twice.
To easily reproduce this issue you must use a multi-node cluster with a
worker node that has lots of CPUs (I used a 36 CPU node).
Repro steps:
1. On manager, `docker network create -d overlay --attachable test`
2. On worker, `docker create --restart=always --network test busybox
top`, many times... 200 is a good number (but not much more due to
subnet size restrictions)
3. Restart the daemon
When the daemon restarts, it will attempt to start all those containers
simultaneously. Note that you could try to do this yourself over the API,
but it's harder to trigger due to the added latency from going over
the API.
The error produced happens when the daemon tries to start the container
upon allocating the network resources:
```
attaching to network failed, make sure your network options are correct and check manager logs: context deadline exceeded
```
What happens here is the worker makes a network attachment request to
the manager. This is an async call which in the happy case would cause a
task to be placed on the node, which the worker is waiting for to get
the network configuration.
In the case of this race, the error ocurrs on the manager like this:
```
task allocation failure" error="failed during network allocation for task n7bwwwbymj2o2h9asqkza8gom: failed to allocate network IP for task n7bwwwbymj2o2h9asqkza8gom network rj4szie2zfauqnpgh4eri1yue: could not find an available IP" module=node node.id=u3489c490fx1df8onlyfo1v6e
```
The task is not created and the worker times out waiting for the task.
---
The mitigation for this is to make sure that only one attachment reuest
is in flight for a given network at a time *when the network doesn't
already exist on the node*. If the network already exists on the node
there is no need for synchronization because the network is already
allocated and on the node so there is no need to request it from the
manager.
This basically comes down to a race with `Find(network) ||
Create(network)` without any sort of syncronization.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: c379d2681ffe8495a888fb1d0f14973fbdbdc969
Component: engine
This fix tries to address the issue raised in 36139 where
ExitCode and PID does not show up in Task.Status.ContainerStatus
The issue was caused by `json:",omitempty"` in PID and ExitCode
which interprate 0 as null.
This is confusion as ExitCode 0 does have a meaning.
This fix removes `json:",omitempty"` in ExitCode and PID,
but changes ContainerStatus to pointer so that ContainerStatus
does not show up at all if no content. If ContainerStatus
does have a content, then ExitCode and PID will show up (even if
they are 0).
This fix fixes 36139.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 9247e09944a4c7f3c2f3f20f180c047a19fb6bae
Component: engine
ReleaseRWLayer can and should only be called once (unless it returns
an error), but might be called twice in case of a failure from
`system.EnsureRemoveAll(container.Root)`. This results in the
following error:
> Error response from daemon: driver "XXX" failed to remove root filesystem for YYY: layer not retained
The obvious fix is to set container.RWLayer to nil as soon as
ReleaseRWLayer() succeeds.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: e9b9e4ace294230c6b8eb010eda564a2541c4564
Component: engine
This fix tries to address the issue raised in 36042
where secret and config are not configured with the
specified file mode.
This fix update the file mode so that it is not impacted
with umask.
Additional tests have been added.
This fix fixes 36042.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 3305221eefd18ba7712a308c1fb05d4eeeac2cc6
Component: engine
Fix issue where network inspect does not show Created time for networks in swarm scope
Upstream-commit: 924fb0e843930ca444e0f3a6632d7cb67a3da479
Component: engine
You don't need to resolve the symlink for the exec as long as the
process is to keep running during execution.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 59ec65cd8cec942cee6cbf2b8327ec57eb5078f0
Component: engine
Signed-off-by: Allen Sun <shlallen1990@gmail.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: de68ac8393d32d2c2028dd11c5816430ad0d8d8b
Component: engine
This change sets an explicit mount propagation for the daemon root.
This is useful for people who need to bind mount the docker daemon root
into a container.
Since bind mounting the daemon root should only ever happen with at
least `rlsave` propagation (to prevent the container from holding
references to mounts making it impossible for the daemon to clean up its
resources), we should make sure the user is actually able to this.
Most modern systems have shared root (`/`) propagation by default
already, however there are some cases where this may not be so
(e.g. potentially docker-in-docker scenarios, but also other cases).
So this just gives the daemon a little more control here and provides
a more uniform experience across different systems.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: a510192b86e7eb1e1112f3f625d80687fdec6578
Component: engine
This fix tries to address the issue raised in 36083 where
`network inspect` does not show Created time if the network is
created in swarm scope.
The issue was that Created was not converted from swarm api.
This fix addresses the issue.
An unit test has been added.
This fix fixes 36083.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 090c439fb8a863731cc80fcb9932ce5958d8166d
Component: engine
This fix tries to address the issue raised in 33661 where
network alias does not work when connect to a network the second time.
This fix address the issue.
This fix fixes 33661.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: d63a5a1ff593f14957f3e0a9678633e8237defc9
Component: engine
