Remove all unneeded disk operations (reload TagStore, umarshal image)
for checking if image still points to same ID. Now slowest part is
queries to sqlite which hopefuly will be removed soon.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: f256d8ad2d1fbd9407d2b7a8eb69c96665c4015e
Component: engine
- do existence check instead of get container
- new connect method on daemon.
- cli network disconnect integration test
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: a0398fbd197b5c4cf261b702ba1a1f924d6134e8
Component: engine
When running LXC dind (outer docker is started with native driver)
cgroup paths point to `/docker/CID` inside `/proc/self/mountinfo` but
these paths aren't mounted (root is wrong). This fix just discard the
cgroup dir from mountinfo and set it to root `/`.
This patch fixes/skip OOM LXC tests that were failing.
Fix#16520
Signed-off-by: Antonio Murdaca <runcom@linux.com>
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Upstream-commit: cfcddefacd125af4d909df653bccc8e3089a03b0
Component: engine
On LXC memory swap was only set to memory_limit*2 even if a value for
memory swap was provided. This patch fix this behavior to be the same
as the native driver and set correct memory swap in the template.
Also add a test specifically for LXC but w/o adding a new test
requirement.
Signed-off-by: Antonio Murdaca <runcom@linux.com>
Upstream-commit: 06f0d03cede5f6cdaca87f6b786555b023d5286f
Component: engine
introduced --subnet, --ip-range and --gateway options in docker network
command. Also, user can allocate driver specific ip-address if any using
the --aux-address option.
Supports multiple subnets per network and also sharing ip range
across networks if the network-driver and ipam-driver supports it.
Example, Bridge driver doesnt support sharing same ip range across
networks.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: cc6aece1fdefbc10638fe9e462a15608c6093115
Component: engine
* Made use of IPAM driver primitives for legacy IP configurations
* Replaced custom Generics with backend labels
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 0f351ce3643a97d4b6af0021826b851f9ba41967
Component: engine
Carry #15975 - Add extra fields based on label and env for gelf/fluentd/json-file/journald log drivers
Upstream-commit: 3856c5efa685013b5e82347d5812de4c7788d4ff
Component: engine
Add docker info show base filesystem size of container/image when use devicemapper
Upstream-commit: 5ecbc9747fab243136402ea78d65e928e6d4678b
Component: engine
It is possible that network files do not exist, especially in the case
of `--net=host` where a host OS (like CoreOS) does not use certain
standard network files. This patch verifies that the source file of a
network mount point exists before adding it to the list of mount points
for bind mounting from the container's metadata directory.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: ed68486f687ce9d5963d7250f70dc66c9f14cd63
Component: engine
this allows jsonfile logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`.
Extra attributes are saved into `attrs` attributes for each log data.
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
Upstream-commit: 0083f6e984894b4d3697c1ae63547c07eea697af
Component: engine
this allows journald logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
Upstream-commit: 11a24f19c2da88b6c3b50114863f24c06c5ce2fd
Component: engine
this allows fluentd logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
Upstream-commit: 4cc8490283fdc8315f595be3e32951929e65bb40
Component: engine
this allows gelf logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Additional log field will be prefixed with `_` as per gelf protocol
https://www.graylog.org/resources/gelf/
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
Upstream-commit: 5794a0190d7505e998116f1321ae39b001d0e710
Component: engine
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 504e67b867865a2835e8002c01087a2cfd7bfd0e
Component: engine
All the go-lint work forced any existing "Uid" -> "UID", but seems to
not have the same rules for Gid, so stat package has calls UID() and
Gid().
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 79240b9eafa08001912d5b360a654b1ad9cd1d20
Component: engine
This adds the capability to turn on user namespace support when using an
experimental build Docker daemon binary using the `--userns-remap` flag.
Also documentation is added to the experimental docs.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 44e1023a93a0107d63d5400695cbbc6da498a425
Component: engine
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 442b45628ee12ebd8e8bd08497896d5fa8eec4bd
Component: engine
When `-s` is not specified, there is no need to ask if there is a plugin
with the specified name.
This speeds up unit tests dramatically since they don't need to wait the
timeout period for each call to `graphdriver.New`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 3b16cb15b496edc3dc080560c7189e06e19c5343
Component: engine
generateIfaceName() is useless as libnetwork has done
the job.
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
Upstream-commit: a1620084c52a1afee55e9eabd7faa30889c8cabc
Component: engine
If I have some unsupported sysinfo, it's warning on daemon
side every time I use `docker info`, it seems unnecessay and
annoying to me, let's keep it quiet.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: aaacde4fd24c22b02312793acda75ee987601727
Component: engine
- use daemon member directly rather than through a function call
- create GetImage method for use external to deamon
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: ee36b57c8f3c33f1c50ecb4305bd62a962876fe6
Component: engine
