The change in 7a7357dae1bcccb17e9b2d4c7c8f5c025fce56ca inadvertently
changed the `defer` error code into a no-op. This restores its behavior
prior to that code change, and also introduces a little more error
logging.
Signed-off-by: Euan Kemp <euan.kemp@coreos.com>
Upstream-commit: 639ab92f011245e17e9a293455a8dae1eb034022
Component: engine
It was causing the error message to be
'overlay' is not supported over <unknown>
instead of
'overlay' is not supported over ecryptfs
Signed-off-by: Iago López Galeiras <iago@kinvolk.io>
Upstream-commit: ddb31b4fdf7311ad6c7e62aa15b5f6da16518e77
Component: engine
This commit reverts a hunk of commit 2f5f0af3f ("Add unconvert linter")
and adds a hint for unconvert linter to ignore excessive conversion as
it is required on 32-bit platforms (e.g. armhf).
The exact error on armhf is this:
19:06:45 ---> Making bundle: dynbinary (in bundles/17.06.0-dev/dynbinary)
19:06:48 Building: bundles/17.06.0-dev/dynbinary-daemon/dockerd-17.06.0-dev
19:10:58 # github.com/docker/docker/daemon/graphdriver/overlay
19:10:58 daemon/graphdriver/overlay/copy.go:161: cannot use stat.Atim.Sec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:161: cannot use stat.Atim.Nsec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:162: cannot use stat.Mtim.Sec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:162: cannot use stat.Mtim.Nsec (type int32) as type int64 in argument to time.Unix
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: b569f57890d4cad132be437e5dac55130b6c76e9
Component: engine
Instead of providing a generic message listing all possible reasons
why xfs is not available on the system, let's be specific.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: c21245c9200ab39a9219b28f8185573b78a55074
Component: engine
If mount fails, the reason might be right there in the kernel log ring buffer.
Let's include it in the error message, it might be of great help.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 46833ee1c353c247e3ef817a08d5a35a2a43bdf3
Component: engine
Since the update to Debian Stretch, devmapper unit test fails. One
reason is, the combination of somewhat old (less than 3.16) kernel and
relatively new xfsprogs leads to creating a filesystem which is not supported
by the kernel:
> [12206.467518] XFS (dm-1): Superblock has unknown read-only compatible features (0x1) enabled.
> [12206.472046] XFS (dm-1): Attempted to mount read-only compatible filesystem read-write.
> Filesystem can only be safely mounted read only.
> [12206.472079] XFS (dm-1): SB validate failed with error 22.
Ideally, that would be automatically and implicitly handled by xfsprogs.
In real life, we have to take care about it here. Sigh.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 6b01bc5adb1255cb48e22e755ab86fd2c3305211
Component: engine
Static build with devmapper is impossible now since libudev is required
and no static version of libudev is available (as static libraries are
not supported by systemd which udev is part of).
This should not hurt anyone as "[t]he primary user of static builds
is the Editions, and docker in docker via the containers, and none
of those use device mapper".
Also, since the need for static libdevmapper is gone, there is no need
to self-compile libdevmapper -- let's use the one from Debian Stretch.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 84f1c054e66d3999aaf2751062cda8a77925b7ae
Component: engine
Make sure to call C.free on C string allocated using C.CString in every
exit path.
C.CString allocates memory in the C heap using malloc. It is the callers
responsibility to free them. See
https://golang.org/cmd/cgo/#hdr-Go_references_to_C for details.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Upstream-commit: 593dbfd1448e8dac08488786fde6fe7fb057bdac
Component: engine
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
Upstream-commit: 7a7357dae1bcccb17e9b2d4c7c8f5c025fce56ca
Component: engine
This commit reverts a hunk of commit 2f5f0af3f ("Add unconvert linter")
and adds a hint for unconvert linter to ignore excessive conversion as
it is required on 32-bit platforms (e.g. armhf).
The exact error on armhf is this:
19:06:45 ---> Making bundle: dynbinary (in bundles/17.06.0-dev/dynbinary)
19:06:48 Building: bundles/17.06.0-dev/dynbinary-daemon/dockerd-17.06.0-dev
19:10:58 # github.com/docker/docker/daemon/graphdriver/overlay
19:10:58 daemon/graphdriver/overlay/copy.go:161: cannot use stat.Atim.Sec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:161: cannot use stat.Atim.Nsec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:162: cannot use stat.Mtim.Sec (type int32) as type int64 in argument to time.Unix
19:10:58 daemon/graphdriver/overlay/copy.go:162: cannot use stat.Mtim.Nsec (type int32) as type int64 in argument to time.Unix
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 21b2c278cc86f0fc411018becbcbf2a7e44b6057
Component: engine
Addresses some comments on 276b44608b04f08bdf46ce7c816b1f744bf24b7d
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 0a98025d4b2910c2089325b87d28c32d05803e13
Component: engine
In d42dbdd3d48d0134f8bba7ead92a7067791dffab the code was re-arranged to
better report errors, and ignore non-errors.
In doing so we removed a deferred remove of the AUFS diff path, but did
not replace it with a non-deferred one.
This fixes the issue and makes the code a bit more readable.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 276b44608b04f08bdf46ce7c816b1f744bf24b7d
Component: engine
I was able to successfully use device mapper autoconfig feature
(commit 5ef07d79c) but it stopped working after a reboot.
Investigation shown that the dm device was not activated because of
a missing binary, that is not used during initial setup, but every
following time. Here's an error shown when trying to manually activate
the device:
> kir@kd:~/go/src/github.com/docker/docker$ sudo lvchange -a y /dev/docker/thinpool
> /usr/sbin/thin_check: execvp failed: No such file or directory
> Check of pool docker/thinpool failed (status:2). Manual repair required!
Surely, there is no solution to this other than to have a package that
provides the thin_check binary installed beforehand. Due to the fact
the issue revealed itself way later than DM setup was performed, it was
somewhat harder to investigate.
With this in mind, let's check for binary presense before setting up DM,
refusing to proceed if the binary is not there, saving a user from later
frustration.
While at it, eliminate repeated binary checking code. The downside is
that the binary lookup is happening more than once now -- I think the
clarity of code overweights this minor de-optimization.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 58a453f3f06c1daf34544da8aa16bb95e8e18010
Component: engine
I tried using dm.directlvm_device but it ended up with the following
error:
> Error starting daemon: error initializing graphdriver: error
> writing docker thinp autoextend profile: open
> /etc/lvm/profile/docker-thinpool.profile: no such file or directory
The reason is /etc/lvm/profile directory does not exist. I think it is
better to try creating it beforehand.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 6ca20ec771ab7c0ebf64c20021ca795746cf3ccb
Component: engine
Signed-off-by: John Howard <jhoward@microsoft.com>
This changes the graphdriver to perform dynamic sandbox management.
Previously, as a temporary 'hack', the service VM had a prebuilt
sandbox in it. With this change, management is under the control
of the client (docker) and executes a mkfs.ext4 on it. This enables
sandboxes of non-default sizes too (a TODO previously in the code).
It also addresses https://github.com/moby/moby/pull/33969#discussion_r127287887
Requires:
- go-winio: v0.4.3
- opengcs: v0.0.12
- hcsshim: v0.6.x
Upstream-commit: 8c279ef3ad8cd1f019789b8378d0394c80a1807f
Component: engine
Make sure user understands this is about the in-kernel driver
(not the dockerd driver or smth).
While at it, amend the comment as well.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: aab2450e25b397d38cdcb5e173ef1121283196c2
Component: engine
Switch some more usage of the Stat function and the Stat_t type from the
syscall package to golang.org/x/sys. Those were missing in PR #33399.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Upstream-commit: 01f70b028e9597ef207509e8124e120688dae185
Component: engine
Specifically, none of the graphdrivers are supposed to return a
not-exist type of error on remove (or at least that's how they are
currently handled).
Found that AUFS still had one case where a not-exist error could escape,
when checking if the directory is mounted we call a `Statfs` on the
path.
This fixes AUFS to not return an error in this case, but also
double-checks at the daemon level on layer remove that the error is not
a `not-exist` type of error.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: d42dbdd3d48d0134f8bba7ead92a7067791dffab
Component: engine
Signed-off-by: John Howard <jhoward@microsoft.com>
This changes the LCOW driver to support both global SVM lifetime and
per-instance lifetime. It also corrects the scratch implementation.
Upstream-commit: 76b0d4819a50c50edd79890db0b92eb96c8d46e6
Component: engine
devicemapper: Wait for device removal if deferredRemoval=true and deferredDeletion=…
Upstream-commit: e04dbe5ac287c2a856b7c96972d931ee5f0e288f
Component: engine
Changes most references of syscall to golang.org/x/sys/
Ones aren't changes include, Errno, Signal and SysProcAttr
as they haven't been implemented in /x/sys/.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
[s390x] switch utsname from unsigned to signed
per 33267e036f
char in s390x in the /x/sys/unix package is now signed, so
change the buildtags
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: 069fdc8a083cb1663e4f86fe3fd9b9a1aebc3e54
Component: engine
Because we use our own logging callbacks in order to use libdm
effectively, it is quite difficult to debug complicated devicemapper
issues (because any warnings or notices from libdm are muted by our own
callback function). e07d3cd9a ("devmapper: Fix libdm logging") further
reduced the ability of this debugging by only allowing _LOG_FATAL errors
to be passed to the output.
Unfortunately libdm is very chatty, so in order to avoid making the logs
even more crowded, add a dm.libdm_log_level storage option that allows
people who are debugging the lovely world of libdm to be able to dive in
without recompiling binaries.
The valid values of dm.libdm_log_level map directly to the libdm logging
levels, and are in the range [2,7] as of the time of writing with 7
being _LOG_DEBUG and 2 being _LOG_FATAL. The default is _LOG_FATAL.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Upstream-commit: 198f83bba120c6c9bda679d33a55acab6cc9f33d
Component: engine
