- `TestRunMountReadOnlyDevShm` and `TestRunHostnameInHostMode` needs
`NotUserNamespace` requirement as these are known limitation of
userns.
- `TestBuildWorkdirCmd` should use a preload image (`busybox`) instead
of one that require network access.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: bc19388fb239b1aa761d323405a7d6a6362845f4
Component: engine
This extract what was in registry_test.go and
registry_mock_test.go. This also move `RegistryHosting`
requirement to `registry.Hosting`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 4300e5e8818571a55e00d9987bec3ad6ca92dc6f
Component: engine
I was seeing this for windowsRS1 testing:
17:20:36 ----------------------------------------------------------------------
17:20:36 FAIL: docker_cli_restart_test.go:31: DockerSuite.TestRestartRunningContainer
17:20:36
17:20:36 docker_cli_restart_test.go:39:
17:20:36 c.Assert(out, checker.Equals, "foobar\n")
17:20:36 ... obtained string = ""
17:20:36 ... expected string = "foobar\n"
17:20:36
17:20:59
17:20:59 ----------------------------------------------------------------------
and I think its because there's a delay between the time the container is
started and the 'echo' is actually run. This gives it up to 10 seconds
to do the 'echo' before giving up.
/cc @jhowardmsft
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: bae22d167cd29016541a6d4f93d38f2608d8e51f
Component: engine
Call daemon.Mount will increase the refcount of mounted path,
for those previous running containers, `Mount` call will make
the refcount to 2. see
https://github.com/docker/docker/blob/v1.13.0-rc4/daemon/graphdriver/counter.go#L38
```
if !m.check {
m.check = true
if c.checker.IsMounted(path) {
m.count++
}
}
m.count++
```
graphdrive could restore on reboot after #22541, call
daemon.Mount to resore the graphdriver is not necessary.
And call `daemon.Mount` on restorting will mount all the containers
mounted layer even if it was stop.
This fix call Mount and then Unmount to get `BaseFs`
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Upstream-commit: 77c725eac2820b3d5b4252f5c25bbf305657d72a
Component: engine
This fix is a follow up based on comment:
and a follow up to:
https://github.com/docker/docker/pull/29222#issuecomment-268908937
As #28789 has been merged in, it is possible for `docker plugin inspect`
to search based on Name or ID Prefix. However, ID-based
`docker plugin enable/disable/rm/set` are still not possible.
This fix addes test for `docker plugin enable/disable/rm/set` to search based on:
- Full ID
- Full Name
- Partial ID (prefix)
The actual fix is done in #29487.
This fix is a follow up of #28789 and #29487.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c80e74e8cc28e9b6197e68321f2402c30de3e895
Component: engine
- Move *one-shot* (one use) function where it is actually used (easier
to know what's going on).
- Remove `pullImageIfNotExist` function as it might be an artifact
from way back. We don't need it as we already have frozen/loaded
image of busybox.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: b2320d121ca735a3879b40d493018b2e3a1a52da
Component: engine
Most of the code is now on pkg/integration.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: def13fa23c812d367e3c61d9c39bdcee66929c17
Component: engine
This fix tries to fix 29667 where image's `CMD` is modified
after `WORKDIR` in Dockerfile.
The value of `b.runConfig.Cmd` was modified in the processing
of `WORKDIR`, in order to fix 28902. However, the same
`b.runConfig.Cmd` is passed to `commit()`.
This fix restored the `b.runConfig.Cmd` before `commit()`
the image for `WORKDIR`.
A test has been added.
This fix fixes 29667.
This fix is related to 28902, 28909, 28514.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 083602384737635af9a89b75a6ca6d27f7515dc6
Component: engine
… relative to the integration-cli package
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 952c8aef3f221ee266627c26b9d8e4c0d936258f
Component: engine
I felt it made more sence 👼
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: ce964a607ad7395af7b74a0ba1efc5ab3cb15790
Component: engine
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Upstream-commit: 3d86b0c79b16334ce5836c0315e4c310b84c2e17
Component: engine
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
Upstream-commit: 8cb2229cd18c53bdbf36301f26db565a50027d6a
Component: engine
Also updates some of the structures being sent so plugins are getting
all the new options.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 677fa03654886ee776ff478c30681d5376cfc196
Component: engine
This will help when extracting suites in their own package.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 930a9869f6cb13bcdd44def2d445cb4505f2dd50
Component: engine
Signed-off-by: Jie Luo <luo612@zju.edu.cn>
typo
Signed-off-by: Jie Luo <luo612@zju.edu.cn>
fix some typos
Signed-off-by: Jie Luo <luo612@zju.edu.cn>
Upstream-commit: ea2dd4b5d0b41552d047814d9e39ddaa3662ab41
Component: engine
This fix is a follow up for comment:
https://github.com/docker/docker/pull/29186/files#r91277345
While #29186 addresses the issue of `docker inspect <unknown object>`
on Windows, it actually makes `docker plugin inspect <unknown object>`
out `object not found` on Windows as well. This is actually misleading
as plugin is not supported on Windows.
This fix reverted the change in #29186 while at the same time,
checks `not supported` in `docker inspect <unknown object>` so that
- `docker plugin inspect <unknown object>` returns `not supported` on Windows
- `docker inspect <unknown object>` returns `not found` on Windows
This fix is related to #29186 and #29185.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 0b3c10ac4ddfe3655bac080440a8553269f2307f
Component: engine
Sets a kernel requirement for for `TestGraphdriverPlugin` since the
graphdriver being used is overlay2.. and also makes sure to skip the
kernel check in the actual graphdriver since we may be able to detect
kernels with backported support for overlay2 style mounts a bit more
freely in the test code.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: e4ebc92edc85d2f46cf41c4ad9514ba0fbafed06
Component: engine
The `docker logs` command performed a
client-side check if the container's
logging driver was supported.
Now that we allow the client to connect
to both "older" and "newer" daemon versions,
this check is best done daemon-side.
This patch remove the check on the client
side, and leaves validation to the daemon,
which should be the source of truth.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 05dc9846e1266e6a3629c26851acb633a380dd17
Component: engine
… and given where it was used, it should be quicker to create an empty
folder instead of passing potentially a big context with unrelated file.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 3dd25b97902e064f43d56632d3a72768e36eecc5
Component: engine
