the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: f89eee5d9d3c01bc6d498fcb1163ec199e6c3078
Component: engine
Split these into cli/trust so that other commands can make use of them.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 4b8c79f25ee00ca5dfe22271c166938009bda976
Component: engine
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c6f0b7f448fac4d037d00f944a7908c60c04dff2
Component: engine
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 5aa5a1cb008963ee6a99011b8f7cd1f489e2bc6a
Component: engine
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 9d4aa3621f226f4167fb7c3585dfe1c37c40472e
Component: engine
Add support for simple and complex syntax to `--publish` through the
use of `PortOpt`.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 75bf18c9f01d050e5fccab98fb671306c7c5f6d2
Component: engine
This reverts 26103. 26103 was trying to make it so that if someone did:
docker build --build-arg FOO .
and FOO wasn't set as an env var then it would pick-up FOO from the
Dockerfile's ARG cmd. However, it went too far and removed the ability
to specify a build arg w/o any value. Meaning it required the --build-arg
param to always be in the form "name=value", and not just "name".
This PR does the right fix - it allows just "name" and it'll grab the value
from the env vars if set. If "name" isn't set in the env then it still needs
to send "name" to the server so that a warning can be printed about an
unused --build-arg. And this is why buildArgs in the options is now a
*string instead of just a string - 'nil' == mentioned but no value.
Closes#29084
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: cdb8ea90b04683adb25c8ccd71b6eaedc44b51e2
Component: engine
- Display the ID column
- Do not append the task ID in the name column
- (NEW): Truncate task IDs, unless --no-trunc is specified
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Upstream-commit: bbd2018ee19eff5594ae3986bf56fbcd0044699d
Component: engine
This removes some very old vestigial code that really should have been
removed during the content addressability transition. It implements
something called "reference" but it behaves differently from the actual
reference package. This was only used by client-side content trust code,
and is relatively easy to extricate.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: d91ed88365317cd86555e2f54bffa30ec6590dfe
Component: engine
Logging configuration was completely ignore when deploy a compose file
to swarm. This fixes it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 806cc1e0f815d7c4e4b7bd4fa537e3d4c3535e23
Component: engine
This fix tries to address the issue in 28884 where
it is possible to mask the secret ID by name.
The reason was that searching a secret is based on name.
However, searching a secret should be done based on:
- Full ID
- Full Name
- Partial ID (prefix)
This fix addresses the issue by changing related implementation
in `getCliRequestedSecretIDs()`
An integration test has been added to cover the changes.
This fix fixes 28884
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 3638ca4d14bcca9bc924f21314e4a1020cd5172f
Component: engine
This fix convert DanglingOnly in ImagesPruneConfig to Filters,
so that it is possible to maintain API compatibility in the future.
Several integration tests have been added to cover changes.
This fix is related to 28497.
A follow up to this PR will be done once this PR is merged.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: a6be56b54e871c4e7a6e72881770a64676c27c3c
Component: engine
This fix tries to address the enhancement proposed in 28708 to display
ID field for the output of `docker plugin ls`.
This fix add `ID` field to the output of `docker plugin ls`
Related docs has been updated.
This fix fixes 28708.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 8a226ed6432a0614b25298fef872c98794f65ba9
Component: engine
This fix tries to address the proposal raised in 28946
to support plugins in `docker inspect`.
The command `docker inspect` already supports
"container", "image", "node", "network", "service", "volume", "task".
However, `--type plugin` is not supported yet at the moment.
This fix address this issue by adding the support of `--type plugin`
for `docker inspect`.
An additional integration test has been added to cover the changes.
This fix fixes 28946.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 90bb2cdb9f15a9b1b9a4e2ea4242882665daac4e
Component: engine
Currently `--publish-rm` only accepts `<TargetPort>` or `<TargetPort>[/Protocol]`
though there are some confusions.
Since `--publish-add` accepts `<PublishedPort>:<TargetPort>[/Protocol]`, some user
may provide `--publish-rm 80:80`. However, there is no error checking so the incorrect
provided argument is ignored silently.
This fix adds the check to make sure `--publish-rm` only accepts `<TargetPort>[/Protocol]`
and returns error if the format is invalid.
The `--publish-rm` itself may needs to be revisited to have a better UI/UX experience,
see discussions on:
https://github.com/docker/swarmkit/issues/1396https://github.com/docker/docker/issues/25200#issuecomment-236213242https://github.com/docker/docker/issues/25338#issuecomment-240787002
This fix is short term measure so that end users are not misled by the silently ignored error
of `--publish-rm`.
This fix is related to (but is not a complete fix):
https://github.com/docker/swarmkit/issues/1396
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c4d773cdfe94a8ba4862a0f8df237b0fc31d2337
Component: engine
When UpdateStatus was not present, the empty values of the timestamps
would be present:
"UpdateStatus": {
"StartedAt": "0001-01-01T00:00:00Z",
"CompletedAt": "0001-01-01T00:00:00Z"
}
To fix this, make the timestamps pointers, so they can be set to nil
when they should not be shown.
Also make UpdateStatus itself a pointer, so an empty object does not
show up when there is no UpdateStatus.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 0e70d96a6813704498a3ce9cc2786648c84daa3a
Component: engine
This fix tries to address the issue raised in discussion of
PR 28735 where it was not possible to manage plugin based on
plugin ID. Previously it was not possible to invoke
`docker plugin inspect` with a plugin ID (or ID prefix).
This fix updates the implementation of `docker plugin inspect`
so that it is possbile to search based on a plugin name, or a
plugin ID. A short format of plugin ID (prefix) is also possible,
as long as there is no ambiguity.
Previously the check of `docker plugin inspect` was mostly done
on the client side. This could potentially cause inconsistency
between API and CMD. This fix move all the checks to daemon side
so that API and CMD will be consistent.
An integration test has been added to cover the changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 0ce6e070f7d1e4b1b478d52b4464f8480dbfd9b7
Component: engine
