* Don't AllocateNetwork when network is disabled
* Don't createNetwork in execdriver when network is disabled
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 3cb14df68c1a59981907fec3bccab80a1d0dda59
Component: engine
- Updated Dockerfile to satisfy libnetwork GOPATH requirements.
- Reworked daemon to allocate network resources using libnetwork.
- Reworked remove link code to also update network resources in libnetwork.
- Adjusted the exec driver command population to reflect libnetwork design.
- Adjusted the exec driver create command steps.
- Updated a few test cases to reflect the change in design.
- Removed the dns setup code from docker as resolv.conf is entirely managed
in libnetwork.
- Integrated with lxc exec driver.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Upstream-commit: d18919e304c240df84502cdcc5ed655d92d12d4f
Component: engine
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add tests for mounting into /proc and /sys
These two locations should be prohibited from mounting volumes into
those destinations.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: f25bbedc85e8a99c1389dbe8f48436907ce24526
Component: engine
The `--userland-proxy` daemon flag makes it possible to rely on hairpin
NAT and additional iptables routes instead of userland proxy for port
publishing and inter-container communication.
Usage of the userland proxy remains the default as hairpin NAT is
unsupported by older kernels.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Upstream-commit: f42348e18f73d1d775d77ac75bc96466aae56d7c
Component: engine
container.
docker run -v /dev:/dev should stop mounting other default mounts in i
libcontainer otherwise directories and devices like /dev/ptx get mishandled.
We want to be able to run libvirtd for launching vms and it needs
access to the hosts /dev. This is a key componant of OpenStack.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: fe9fe1473cc54c4d2962391d6fa05ecc1c2c96f1
Component: engine
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 409407091a7282d0c4086b71e86397e2d089ba13
Component: engine
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: 23feaaa240853c0e7f9817f8c2d272dd1c93ac3f
Component: engine
This commit contains changes for docker:
* user.GetGroupFile to user.GetGroupPath docker/libcontainer#301
* Add systemd support for OOM docker/libcontainer#307
* Support for custom namespaces docker/libcontainer#279, docker/libcontainer#312
* Fixes#9699docker/libcontainer#308
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 50905a6d6ce2fdd1ab0c33ec0b7a26895e0cbeea
Component: engine
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Upstream-commit: 497fc8876ede9924f61c0eee4dfadd71e5d9f537
Component: engine
Right now, MAC addresses are randomly generated by the kernel when
creating the veth interfaces.
This causes different issues related to ARP, such as #4581, #5737 and #8269.
This change adds support for consistent MAC addresses, guaranteeing that
an IP address will always end up with the same MAC address, no matter
what.
Since IP addresses are already guaranteed to be unique by the
IPAllocator, MAC addresses will inherit this property as well for free.
Consistent mac addresses is also a requirement for stable networking (#8297)
since re-using the same IP address on a different MAC address triggers the ARP
issue.
Finally, this change makes the MAC address accessible through docker
inspect, which fixes#4033.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Upstream-commit: 88e21c6a75310da158bbee3a5fdc135697c93ba1
Component: engine
Add --security-opts options to allow user to customize container labels and apparmor profile
Upstream-commit: d40ab6f1238c78ea84645e516f1f24d7991798b0
Component: engine
This also removes dead code in the native driver for a past feature that
was never fully implemented.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 32dca1a7b0e800d796e54fc8f253818ba64fa075
Component: engine
similar features in the future.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
Upstream-commit: 4aa5da278f49c889d43191f82ff42d3a95266d62
Component: engine
This also makes sure that devices are pointers to avoid copies
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Upstream-commit: 69989b7c06b0ca6737e83ddf8fcfa2dfccc57a7c
Component: engine
We now have one place that keeps track of (most) devices that are allowed and created within the container. That place is pkg/libcontainer/devices/devices.go
This fixes several inconsistencies between which devices were created in the lxc backend and the native backend. It also fixes inconsistencies between wich devices were created and which were allowed. For example, /dev/full was being created but it was not allowed within the cgroup. It also declares the file modes and permissions of the default devices, rather than copying them from the host. This is in line with docker's philosphy of not being host dependent.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
Upstream-commit: 608702b98064a4dfd70b5ff0bd6fb45d2429f45b
Component: engine
Add specific types for Required and Optional DeviceNodes
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Upstream-commit: f042c3c15759fce5cc139f2b3362b791ac7d4829
Component: engine
