init layer is read/write layer and not read only layer. Following commit
introduced new graph driver method CreateReadWrite.
ef5bfad Adding readOnly parameter to graphdriver Create method
So far only windows seem to be differentiating between above two methods.
Making this change to make sure -init layer calls right method so that
we don't have surprises in future.
Windows does not need init layer. This patch also gets rid of creation of
init layer on windows.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 2508ca000e79dfe1a956b0078a0d196dd6b66dab
Component: engine
This PR adds support for running regular containers to be connected to
swarm mode multi-host network so that:
- containers connected to the same network across the cluster can
discover and connect to each other.
- Get access to services(and their associated loadbalancers)
connected to the same network
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Upstream-commit: 99a98ccc14a9427be47c8006e130750710db0a16
Component: engine
This moves the types for the `engine-api` repo to the existing types
package.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 91e197d614547f0202e6ae9b8a24d88ee131d950
Component: engine
This fix tries to address the issue raised in comment:
https://github.com/docker/docker/pull/25943#discussion_r76843081
Previously, the validation for `ip6` is done by checking ParseIP().To16().
However, in case an IPv4 address or an IPv4-mapped Ipv6 address has been
provided, the validation will pass (should fail).
This fix first check if `--ip6` is passed with a valid IP address and returns
error for invalid IP addresses. It then check if an IPv4 or IPv4-mapped Ipv6
address is passed, and return error accordingly.
This fix adds two more cases in the tests. One for IPv4 address passed to `--ip6`
and another for Ipv4-mapped IPv6 address passed to `--ip6`. In both cases,
without this fix the validation will pass through.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 1e6eccae69bd9b1f65ec87c33a6a872c81f7fb23
Component: engine
This fix tries to fix the issue raised in 25863 where `--ip` value
is not validated for `docker create`. As a result, the IP address
passed by `--ip` is not used for `docker create` (ignored silently).
This fix adds validation in the daemon so that `--ip` and `--ip6`
are properly validated for `docker create`.
An integration test has been added to cover the changes.
This fix fixes 25863.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c7045eb93523df76feb9f3e00540e69471a1855e
Component: engine
fixes#25766
If a container's AutoRemove is enabled, client will wait until it's
removed after container exits, this is implemented based on "destroy"
event.
Currently an "AutoRemove" container will report "destroy" event to
notify a hanging client to exit before all volumes are removed, this is
wrong, we should wait container until everything is cleaned up.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 4df77c11e065bf96b04fc0328a7e7600a2e64937
Component: engine
This fix tries to address the issue raised in #23498 to allow unset
`--entrypoint` in `docker run` or `docker create`.
This fix checks the flag `--entrypoint` and, in case `--entrypoint=` (`""`)
is passed, unset the Entrypoint during the container run.
Additional integration tests have been created to cover changes in this fix.
This fix fixes#23498.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c8d3ee80933d6337382fb4a52d90835e263c1aaf
Component: engine
In order to keep a little bit of "sanity" on the API side, validate
hostname only starting from v1.24 API version.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 6daf3d2a783fd042e870c8af8bbd19fc28989505
Component: engine
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 534a90a99367af6f6bba1ddcc7eb07506e41f774
Component: engine
SELinux labeling should be disabled when using --privileged mode
/etc/hosts, /etc/resolv.conf, /etc/hostname should not be relabeled if they
are volume mounted into the container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Upstream-commit: c3dd6074b0f07cd7e57d677cc06b4c57a302a02f
Component: engine
Implements a `CachedPath` function on the volume plugin adapter that we
call from the volume list function instead of `Path.
If a driver does not implement `CachedPath` it will just call `Path`.
Also makes sure we store the path on Mount and remove the path on
Unmount.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 9e6b1852a78eda6ed2cb255d6be8a0d0e5a5ca40
Component: engine
fixes races between list and create
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 114be249f022535f0800bd45987c4e9cd1b321a4
Component: engine
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: a793564b2591035aec5412fbcbcccf220c773a4c
Component: engine
We should support update swap memory without memory.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 8ae6f6ac28c1e9e28c1503b8118691580b66d885
Component: engine
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: d3eca4451d264aac564594fe46b8c097bd85a5cc
Component: engine
Cleanup does not happen if retErr is not set on return
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: 54f8ba7e9e496ae58c15eddb084fbd51418ab197
Component: engine
When a container is created it is registered before the mount is created. This can lead to mount does not exist errors when inspecting between create and mount.
Fixes#18753
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: d8e090669ed4d9b27206d7f8797c01ed4b2cd20f
Component: engine
RWLayer will now have more operations and be protected through a referenced type rather than always looked up by string in the layer store.
Separates creation of RWLayer (write capture layer) from mounting of the layer.
This allows mount labels to be applied after creation and allowing RWLayer objects to have the same lifespan as a container without performance regressions from requiring mount.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: d04fa49a0dec89d2f71a813ce8eaa182184139c5
Component: engine
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 7ac4232e70fe7cf7318333cd0890db7f95663079
Component: engine
To make docker inspect return a consistent result of networksettings
for created container and stopped container, it's bettew to update
the network settings on container creating.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Upstream-commit: c427131c94369d5c49a4f14d78e6ab9c678e12df
Component: engine
This is more aligned with `Daemon.GetImage` and less confusing.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: d7d512bb927023b76c3c01f54a3655ee7c341637
Component: engine
- Moved the following config structs to api/types
- ContainerRmConfig
- ContainerCommitConfig
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: 63fb931a0b7298c6281898bcc5f53ab0655ad1a6
Component: engine
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 6bb0d1816acd8d4f7a542a6aac047da2b874f476
Component: engine
- avoid empty Names in container list API when fails to remove
a container
- avoid dead containers when fails to create a container
Signed-off-by: Shijiang Wei <mountkin@gmail.com>
Upstream-commit: 4953ea1eae211366c7214bfd2381a4a189d5466a
Component: engine
