If `--storage-opt dm.datadev=/dev/loop0 --storage-opt
dm.metadatadev=/dev/loop1 ` were provided, the information was not
reflected in the information output.
Closes: #7137
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: 7e9ba22dc358196ac0d13524aa05677327f19ff9
Component: engine
Some graphdrivers are Differs and type assertions are made
in various places throughout the project. Differ offers some
convenience in generating/applying diffs of filesystem layers
but for most graphdrivers another code path is taken.
This patch brings all of the logic related to filesystem
diffs in one place, and simplifies the implementation of some
common types like Image, Daemon, and Container.
Signed-off-by: Josh Hawn <josh.hawn@docker.com>
Upstream-commit: dee6b481fe0da1d845261ffff2e610fb05898d3c
Component: engine
functions to pkg/parsers/kernel, and parsing filters to
pkg/parsers/filter. Adjust imports and package references.
Docker-DCO-1.1-Signed-off-by: Erik Hollensbe <github@hollensbe.org> (github: erikh)
Upstream-commit: 4398108433121ce2ac9942e607da20fa1680871a
Component: engine
Commit 09ee269d ("devmapper: Add option for specifying the thin pool
blocksize") also switched the default dm-thin-pool blocksize from 64K to
512K. That change unfortunately breaks the activation of dm-thin-pool
devices that were previously created using a 64K blocksize. Here is an
example of the dm-thin-pool activation failure users may experience:
device-mapper: thin: 253:4: pool target (204800 blocks) too small: expected 1638400
device-mapper: table: 253:4: thin-pool: preresume failed, error = -22
The reason for this is docker is passing 512K as the blocksize for a
dm-thin-pool that was previously created using a 64K blocksize. Docker
doesn't record the blocksize the is used when it creates a dm-thin-pool.
Until now it never had a need to do so because the blocksize was always
hardcoded. The dm-thin-pool blocksize must be the same every time a
dm-thin-pool is activated.
As a stop-gap fix, revert to using 64K for the default blocksize.
But we do need a proper fix for this now that 'dm.blocksize' is exposed
as a proper storage option. One possible fix would be to record the
blocksize for each dm-thin-pool that docker creates and to pass that
recorded blocksize down in the dmsetup table load each time the
dm-thin-pool is activated (this would be comparable to what lvm2 does).
Docker-DCO-1.1-Signed-off-by: Mike Snitzer <snitzer@redhat.com> (github: snitm)
Upstream-commit: d715803d45d41bfbbd5faf1f4a8239c08d6d8c90
Component: engine
Add dm.blocksize option that you can use with --storage-opt to set a
specific blocksize for the thin provisioning pool.
Also change the default dm-thin-pool blocksize from 64K to 512K. This
strikes a balance between the desire to have smaller blocksize given
docker's use of snapshots versus the desire to have more performance
that comes with using a larger blocksize. But if very small files will
be used on average the user is encouraged to override this default.
Docker-DCO-1.1-Signed-off-by: Mike Snitzer <snitzer@redhat.com> (github: snitm)
Upstream-commit: 09ee269d998ad04733ef577739fa051df9d3f12e
Component: engine
Device Mapper needs device sizes in binary (1024) multiples. Otherwise
kernel checks can find that the specified thin-pool device sizes aren't
a multiple of the specified thin-pool blocksize.
The name for "RAMInBytes" is likely too narrow given the new consumers
but... Also add "tebibyte" support to RAMInBytes.
Docker-DCO-1.1-Signed-off-by: Mike Snitzer <snitzer@redhat.com> (github: snitm)
Upstream-commit: 2470a5ed999d9dc8d4b9bd250727ac13964db5b3
Component: engine
createPool() and reloadPool() should be consistent with the thin-pool
table params they use.
Since createPool() specifies '1 skip_block_zeroing' reloadPool() should
too. Otherwise, if the pool is reloaded (as is done when resizing
loopback devices) block zeroing will be enabled after the reload
completes.
Docker-DCO-1.1-Signed-off-by: Mike Snitzer <snitzer@redhat.com> (github: snitm)
Upstream-commit: d420134fa2ea8ceedf2a9a64263d09b308263c2c
Component: engine
Docker-DCO-1.1-Signed-off-by: Rick van de Loo <rickvandeloo@gmail.com> (github: vdloo)
Upstream-commit: 98041d26bbe68458ca1c2ac7074ef600e832753e
Component: engine
If this is at the root directory for the daemon you could unmount
somones filesystem when you stop docker and this is actually only needed
for the palces that the graph drivers mount the container's root
filesystems.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Upstream-commit: 3609b051b88565c0fe0615fd47ddb48eed549d27
Component: engine
The blkdiscard hack we do on container/image delete is pretty slow, but
required to restore space to the "host" root filesystem. However, it
is pretty useless on raw devices, and you may not need it in development
either.
In a simple test of the devicemapper backend on loopback the time to
delete 20 container went from 11 seconds to 0.4 seconds with
--storage-opt blkdiscard=false.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 0434a2ce64c0ce07e97e9a516cef226be67d5f5b
Component: engine
This adds dm.datadev and dm.metadatadev options that you can use with
--storage-opt to set to specific devices to use for the thin
provisioning pool.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: a226168a8b877d632cb87c95dd0288f6092b9d8f
Component: engine
This adds the following --storage-opts for the daemon:
dm.fs: The filesystem to use for the base image
dm.mkfsarg: Add an argument to the mkfs command for the base image
dm.mountopt: Add a mount option for devicemapper mount
Currently supported filesystems are xfs and ext4.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 807bc2cd049d97f31eab54ce3d5719d63240e3e7
Component: engine
This allows setting these settings to be passed:
dm.basesize
dm.loopdatasize
dm.loopmetadatasize
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 7f5ba068f438ee159bfca7396de4987bcae45809
Component: engine
This lets you add storage specific options for the daemon.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 822ea97ffcf10645720bb93108a60f8b9ce9931d
Component: engine
If we can't even get the current device mapper driver version, then
we cleanly fail the devmapper driver as not supported and fall back
on the next one.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 948e54ac455f88c79524dcf117df80f2d4c3f96c
Component: engine
There is no reason to do discard durink mkfs, as the filesystem
is on a newly allocated device anyway. Discard is a slow operation,
so this may help initial startup a bit, especially if you use a larger
thin pool.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 42708181b1976a768428568e664c566717ade8c4
Component: engine
This is no longer needed, as the tests are gone.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 39d244a593aad63be58d8b2e452715e25135f255
Component: engine
Now that we have the generic graphtest tests that actually tests
the driver we can remove the old mock-using tests. Almost all of
these tests were disabled anyway, and the four remaining ones
didn't really test much while at the same time being really
fragile and making the rest of the code more complex due to
the mocking setup.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: bd6fd25dfb4cf7aae0e5e382e3bf10c9b2caa5fb
Component: engine
This adds daemon/graphdriver/graphtest/graphtest which has a few
generic tests for all graph drivers, and then uses these
from the btrs, devicemapper and vfs backends.
I've not yet added the aufs backend, because i can't test that here
atm. It should work though.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 27744062aa96f5f16d615ed829bc0d06b7df381d
Component: engine
Currently the tests that mocks or denies functions leave this state
around for the next test. This is no good if we want to actually
test the devicemapper code in later tests.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Upstream-commit: 47c79870ea529099cca635f53da870e0cea5652a
Component: engine
