This extract what was in registry_test.go and
registry_mock_test.go. This also move `RegistryHosting`
requirement to `registry.Hosting`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 4300e5e8818571a55e00d9987bec3ad6ca92dc6f
Component: engine
I felt it made more sence 👼
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: ce964a607ad7395af7b74a0ba1efc5ab3cb15790
Component: engine
The success of the win2lin CI before was really "by chance" on the
DockerDaemonSuite : the DockerDaemonSuite was panicking when starting
the daemon on the first non-skipped test.The suite panicked but as
the error returned from `StartWithBusybox` was nil, the test kept
going and was OK because the client had all the correct environment
variables set up to discuss with the remote daemon.
Then, as the suite panicked, no more test attached on the
DockerDaemonSuite ran (that's why on win2lin, `DockerDaemonSuite` was
only composed by 5 tests !). The really bad thing is, we didn't get
any report of the panic on the suite (go-check hiding something
somewhere).
As DockerDaemonSuite needs to run test on the same host as it's
running, this adds a `SameHostDaemon` requirement to the Suite.
This changes also make sure `TestRestartContainerWithRestartPolicy`
does left weirdies behind it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: e857785df4b53df551ad25d132bc0274923f2e53
Component: engine
… to make sure it doesn't fail. It also introduce StartWithError,
StopWithError and RestartWithError in case we care about the
error (and want the error to happen).
This removes the need to check for error and make the intent more
clear : I want a deamon with busybox loaded on it — if an error occur
it should fail the test, but it's not the test code that has the
responsability to check that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: c502fb49dc7af89adfb2a9686354aa78c2c46002
Component: engine
SetupTest could fail creating a Daemon object (eg, out of space when
creating daemon root dir). In such a case, TearDownTest fails when
accessing the daemon object. This commit adds the required nil check.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
Upstream-commit: 5890091cc02ca75425c8635cbe4ec6c7ccd1663b
Component: engine
As of https://github.com/docker/swarmkit/pull/1607, swarmkit honors
global network plugins while allocating network resources.
This IT covers the e2e integration between libnetwork, swarmkit and
docker engine to support global network-plugins for swarm-mode
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: af185a380697433aef01aac0259f814ef9c42d43
Component: engine
This PR adds support for running regular containers to be connected to
swarm mode multi-host network so that:
- containers connected to the same network across the cluster can
discover and connect to each other.
- Get access to services(and their associated loadbalancers)
connected to the same network
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Upstream-commit: 99a98ccc14a9427be47c8006e130750710db0a16
Component: engine
moves ensure-frozen-images to go
moves ensure-syscall-test to go
moves ensure-nnp-test to go
moves ensure-httpserver to go
Also makes some of the fixtures load only for the required tests.
This makes sure that fixtures that won't be needed for a test run such as
`make TESTFLAGS='-check.f Swarm' test-integration-cli` (for example)
aren't loaded... like the syscall tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: ff91276d1f5beab5582d9ca582ee01af13198333
Component: engine
This moves the types for the `engine-api` repo to the existing types
package.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 91e197d614547f0202e6ae9b8a24d88ee131d950
Component: engine
Errors here are not important and not really related to set success/failure.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: e34244842ca968ff96769d1b5eab52fecddee80d
Component: engine
Use `OnTimeout` callback on test timeouts to trigger a stack dump for
running daemons. This will help analyze stuck tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 82dd2c3159993fd32f4a8f27b92699a6287c215a
Component: engine
Instead of using the bundles dir, which may be mounted in and ultimately
break if using b2d/d4mac/d4win. This makes it much easier to collect
test daemon logs and more natural for use d4mac/d4win users to run tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 4804eb700c3b9f0e337abc6e3c51b031c0328482
Component: engine
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: a0ccd0d42fdb0dd2005f67604cb81a5a6b26787e
Component: engine
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 2cc5bd33eef038bf5721582e2410ba459bb656e9
Component: engine
This is done in a hacky way as currently there is no better way.
Uses known implementation details about how tasks are scheduled to be
able to operate on the underlying container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: e5ec575b32d6979914dce576f1b8bb71f3057cea
Component: engine
schema1 manifests is not working on ARM64, we should skip integration-cli
tests for schema1 manifests on ARM64.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Upstream-commit: 9c1566a1dfa3eccd12e09a3e2cbda60503600d44
Component: engine
- cherry-pick from 1.10.3 branch: 0186f4d4223a094a050d06f456355da3ae431468
- add token service test suite
- add integration test (missing in 1.10.3 branch)
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Upstream-commit: 1b5c2e1d722757a55364fb45cf3fcec7f2c75fb4
Component: engine
This PR adds the "notary" binary requirement for tests.
Previously, NotaryHosting was checking for the "notary-server"
binary under the name notaryBinary. This renames that reference to
notaryServerBinary, so that notaryBinary can rightly refer
to the actual "notary" binary.
Currently only one test actually uses the notary binary, so it's been
updated accordingly.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: db700a678d1da4275553ff7201e2597c7a8016ee
Component: engine
This PR moves the testRequires check from within setupRegistry
and setupNotary to when the Suite itself starts up.
This fixes a bug where testRequires() in setupRegistry() would
succeed and start registry, but testRequires() in setupNotary()
would fail. This immediately exits the goroutine with registry
still running.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: d800a4e1ba7d23864aa541c1919465bcf22dd1a9
Component: engine
Instead of just showing the number of containers this patch will
show the number of running, paused and stopped containers as well.
Signed-off-by: Kim Eik <kim@heldig.org>
(cherry picked from commit a9804ab1cb117a132cbf460067d55f5146d50956)
Upstream-commit: e732f4e649a3420eab3b6541dacbefe3cf00719a
Component: engine
Add DockerSchema1RegistrySuite which uses this registry, and make
applicable integration tests run as part of this suite.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 1fa2e3115105f6b2334f452bd08415e8f00633d7
Component: engine
Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Upstream-commit: 39f2f15a35121f348e1a87db4203bcb72e632b16
Component: engine
Allows people to create out-of-process graphdrivers that can be used
with Docker.
Extensions must be started before Docker otherwise Docker will fail to
start.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b78e4216a2a97704b664da34d526da1f7e080849
Component: engine
