Change "service create" and "service update" to wait until the creation
or update finishes, when --detach=false is specified. Show progress bars
for the overall operation and for each individual task (when there are a
small enough number of tasks), unless "-q" / "--quiet" is specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 330a0035334871d92207b583c1c36d52a244753f
Component: engine
Add some required command operators to the `cli` package, and update
some tests to use this package, in order to remove a few functions
from `docker_utils_test.go`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: eeaa6c96d83575da765dfc626c2c73d8a29dda32
Component: engine
This fix tries to address the request in 31325 by adding
`--filter mode=global|replicated` to `docker service ls`.
As `docker service ls` has a `MODE` column by default, it is natural
to support `--filter mode=global|replicated` for `docker service ls`.
There are multiple ways to address the issue. One way is to pass
the filter of mode to SwarmKit, another way is to process the filter
of mode in the daemon.
This fix process the filter in the daemon.
Related docs has been updated.
An integration test has been added.
This fix fixes 31325.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 43a1bd564b5dbd835631cda102f68286c0d533e9
Component: engine
This fix tries to address the issue raised in 25696 where
it was not possible to specify `--stop-signal` for `docker service create`
and `docker service update`, in order to use special signal to stop
the container.
This fix adds `--stop-signal` and update the `StopSignal` in `Config`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 25696.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: c2d49ec214649b0025f7060429334893350fbaee
Component: engine
- otherwise the attachment task will stay in store and
consume IP addresses and there is no way to remove it.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Upstream-commit: 91820b69412e2ec9e5b3201cd5c637ca1352fd39
Component: engine
This fix is partially based on comment
https://github.com/docker/docker/issues/30242#issuecomment-273517205
Currently, `docker network inspect` relies on `FindNetwork()` which
does not take into consideration that multiple networks with the same
name might exist.
This fix propose to return `docker network inspect` in a similiar
fashion like other commands:
1. Lookup full ID
2. Lookup full name
3. Lookup partial ID
If multiple networks exist, an error will be returned.
NOTE: this fix is not a complete fix for the issue raised in
https://github.com/docker/docker/issues/30242#issuecomment-273517205
where SwarmKit is unable to update when multiple networks with the same
name exit.
To fix that issue requires multiple places when `FindNetwork()` is called.
Because of the impact of changing `FindNetwork()`, this fix focus on
the issue in `docker network inspect`.
A separate PR will be created to address
https://github.com/docker/docker/issues/30242#issuecomment-273517205
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: abf31ee0837ff80638f10b77df9025b6b6470253
Component: engine
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 499a0dd43e50c6f253f8890f5c54ae99675b1e7e
Component: engine
There is 5 calls left, that use StdinPipe that is not yet supported by
icmd.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: ecbb0e62f66da7d698c4f4583f36b927d8cfa811
Component: engine
- When the node leaves the cluster, if any user run
container(s) is connected to the swarm network,
then daemon needs to detach the container(s) and
remove the network.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Upstream-commit: 3cedca5d532958ffc007d9b62cc871d3d113f054
Component: engine
to make goreportcard a bit happier
https://goreportcard.com/report/github.com/docker/docker
also found that `TestCpToErrDstParentNotExists()` was
partially broken, because a `runDockerCp()` was inadvertently
removed in f26a31e80cfcc77daba0872ddb14bf03f4398311
`TestDaemonRestartSaveContainerExitCode()` didn't verify
the actual _Error_ message, so added that to the test,
and updated the test to take into account that the
"experimental" CI enables `--init` on containers.
`TestVolumeCLICreateOptionConflict()` only checked
for an error to occur, but didn't validate if the
error was due to conflicting options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: ba0afd70e89562aa3c668c87fb9191ed9edb7260
Component: engine
There is an issue with the ports leaking to other tests.
This is a workaround until the actual problem is addressed.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Upstream-commit: 24cd5444f982fd295248006f44c6ec2f4ab7f1f8
Component: engine
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 0f30c644441b3b4150252af1b41db99d4b6e697a
Component: engine
This fix tries to address the issue raised in 24596 where it was not
possible to join as manager only (`--availability=drain`).
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
NOTE: Additional pull request for swarmkit and engine-api will
be created separately.
This fix fixes 24596.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: a8e7e37aa82d1adac67b05836ea97a06fbdfdbf0
Component: engine
This fix tries to address the issue raised in docker/docker-29730
where a service with multiple published ports mapping to the same target
port (e.g., `--publish 5000:80 --publish 5001:80`) can't be allocated.
The reason for the issue is that, `getPortConfigKey` is used for both
allocated ports and configured (may or may not be allocated) ports.
However, `getPortConfigKey` will not take into consideration the
`PublishedPort` field, which actually could be different for different
allocated ports.
This fix saves a map of `portKey:portNum:portState`, instead of currently
used `portKey:portState` so that multiple published ports could be processed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: cb59bd0c5194f3f74cd405a87b562465219cad8a
Component: engine
Start work on adding unit tests to our cli code in order to have to
write less costly integration test.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: f151c297eb268e22dc1eb36ded0e356885f40739
Component: engine
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 70942352d56779b6c428efa1c2d4cb8a45c1dfa1
Component: engine
check to see if the node is part of a swarm, and if so, if it is unlocked first.
If neither of these are true, abort the command.
Signed-off-by: Ying Li <ying.li@docker.com>
Upstream-commit: a6a0880a22e2b135d8a20a46b9ba34c7a9cf2f10
Component: engine
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 5aa5a1cb008963ee6a99011b8f7cd1f489e2bc6a
Component: engine
… to make sure it doesn't fail. It also introduce StartWithError,
StopWithError and RestartWithError in case we care about the
error (and want the error to happen).
This removes the need to check for error and make the intent more
clear : I want a deamon with busybox loaded on it — if an error occur
it should fail the test, but it's not the test code that has the
responsability to check that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: c502fb49dc7af89adfb2a9686354aa78c2c46002
Component: engine
Add support for simple and complex syntax to `--publish` through the
use of `PortOpt`.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 75bf18c9f01d050e5fccab98fb671306c7c5f6d2
Component: engine
This fix tries to fix the issue raised in 29044 where
the IPAM options is missing in swarm network mode
after the service is deployed. Before the service
is deployed, the IPAM options is available.
The reason for the issue is that, before service is
deployed, `network inspect` is querying the swarm and
obtained the correct information.
However, after service is deployed, swarm executor
does not pass the IPAM options to the backend (daemon).
Also after service is deployed, `network inspect` is
actually querying the local daemon for information.
At this time the network information with missing IPAM
options is returned.
This fix fixes the issue by updating the swarm network
allocator and swarm executor.
A separate PR for swarmkit will be opened.
An integration test has been added to cover the change.
This fix fixes 29044.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 4d958e99c178f7cd4196ed901c2834ae13f0f7d0
Component: engine
finish being demoted before restarting it and ensuring it isn't locked anymore
to reduce test flakiness.
Signed-off-by: cyli <cyli@twistedmatrix.com>
Upstream-commit: e831a7cdb7a2e60f38e6de8a5e6be4d681181f42
Component: engine
Add extra swarm lock/unlock tests that ensure that all the managers are locked with the same key
Upstream-commit: 1b6352996aa71e678ac2c84324f785c424090777
Component: engine
