Closes#16667
Uses the prefix "devmapper:" for all the fmt and logrus error, debug, and info messages.
Signed-off-by: Chris Dituri <csdituri@gmail.com>
Upstream-commit: 0aa6ace6e6e819551d21ebdcaa0c5802f76d7603
Component: engine
This changes deivce to device in daemon, test and docs.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: 7c077c2c3443fdb9b13b7790bc96cdaa287cf381
Component: engine
ext4 filesystem creation can take a long time on 100G thin device and
systemd might time out and kill docker service. Often user is left thinking
why docker is taking so long and logs don't give any hint. Log an info
message in journal for start and end of filesystem creation. That way
a user can look at logs and figure out that filesystem creation is
taking long time.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: a489e685c0d17455463945316cfe366e4e65dca6
Component: engine
Show warning when user specify dm.basesize for already initialized devicemapper driver
Upstream-commit: cf824d974922ae7ad55548b3f0050a2bb0e29aa2
Component: engine
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Upstream-commit: 1716d497a420f0cd4e53a99535704c6d215e38c7
Component: engine
If platform supports xfs filesystem then use xfs as default filesystem
for container rootfs instead of ext4. Reason being that ext4 is pre-allcating
lot of metadata (around 1.8GB on 100G thin volume) and that can take long
enough on AWS storage that systemd times out and docker fails to start.
If one disables pre-allocation of ext4 metadata, then it will be allocated
when containers are mounted and we will have multiple copies of metadata
per container. For a 100G thin device, it was around 1.5GB of metadata
per container.
ext4 has an optimization to skip zeroing if discards are issued and
underlying device guarantees that zero will be returned when discarded
blocks are read back. devicemapper thin devices don't offer that guarantee
so ext4 optimization does not kick in. In fact given discards are optional
and can be dropped on the floor if need be, it looks like it might not be
possible to guarantee that all the blocks got discarded and if read back
zero will be returned.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 07ff17fb850e5ddae6f38cc21776ebb9b1690f3e
Component: engine
If user wants to use a filesystem it can be specified using dm.fs=<filesystem>
option. It is possible that docker already had base image and a filesystem
on that. Later if user wants to change file system using dm.fs= option
and restarts docker, that's not possible. Warn user about it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 83a34e000b2332d9a1b4214a77fae021ed144acb
Component: engine
Right now if blkid fails we are just logging a debug message and don;t return
the actual error to caller. Caller gets the error message that thin pool
base device UUID verification failed and it might give impression that thin
pool changed. But that's not the case. Thin pool is in such a state that we
could not even query the thin device UUID. Retrun error message appropriately
to make situation more clear.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 2c8b7c597ae43e28887a52a9fcb12273fe7d8797
Component: engine
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 3b5fac462d21ca164b3778647420016315289034
Component: engine
cleanupDeleted() takes devices.Lock() but does not drop it if there are
no deleted devices. Hence docker deadlocks if one is using deferred
device deletion feature. (--storage-opt dm.use_deferred_deletion=true).
Fix it. Drop the lock before returning.
Also added a unit test case to make sure in future this can be easily
detected if somebody changes the function.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 2f16895ee94848e2d8ad72bc01968b4c88d84cb8
Component: engine
Add docker info show base filesystem size of container/image when use devicemapper
Upstream-commit: 5ecbc9747fab243136402ea78d65e928e6d4678b
Component: engine
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 442b45628ee12ebd8e8bd08497896d5fa8eec4bd
Component: engine
Right now we check for the existence of device but don't make sure it is
a thin pool device. We assume it is a thin pool device and call poolStatus()
on the device which returns an error EOF. And that error does not tell
anything.
So before we reach the stage of calling poolStatus() make sure we are working
with a thin pool device otherwise error out.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 6d2d0a74e8effe65175473352bf58fc4beda1718
Component: engine
Start a goroutine which runs every 30 seconds and if there are deferred
deleted devices, it tries to clean those up.
Also it moves the call to cleanupDeletedDevices() into goroutine and
moves the locking completely inside the function. Now function does not
assume that device lock is held at the time of entry.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 87de04005d61ab986d70a31e3ac82ec92912df55
Component: engine
Keep track of number of deleted devices and export this information through
"docker info".
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: d295dc66521e2734390473ec1f1da8a73ad3288a
Component: engine
Finally here is the patch to implement deferred deletion functionality.
Deferred deleted devices are marked as "Deleted" in device meta file.
First we try to delete the device and only if deletion fails and user has
enabled deferred deletion, device is marked for deferred deletion.
When docker starts up again, we go through list of deleted devices and
try to delete these again.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: d929589c1fc4538dcd1b2a7a3dc7d4afbdfa72fd
Component: engine
Provide a command line option dm.use_deferred_deletion to enable deferred
device deletion feature. By default feature will be turned off.
Not sure if there is much value in deferred deletion being turned on
without deferred removal being turned on. So for now, this feature can
be enabled only if deferred removal is on.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 51e059e7e90f37848596a0b6ec83f7835e6e4131
Component: engine
Currently during startup we walk through all the device files and read
their device ID and mark in a bitmap that device id is used.
We are anyway going through all device files. So we can as well load all
that data into device hash map. This will save us little time when
container is actually launched later.
Also this will help with later patches where cleanup deferred device
wants to go through all the devices and see which have been marked for
deletion and delete these.
So re-organize the code a bit.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 6b8b4feaa165af630dd33423f0538a0b987703ae
Component: engine
Simplify setupBaseImage() even further. Move some more code in a separate
function. Pure code reorganization. No functionality change.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 0fcd485626f110bbf39e8a6b1edc11b4ac6f7065
Component: engine
Move thin pool related checks in a separate function. Pure code reorganization.
Makes reading code easier.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 69051ec0a58906e5252f902063ccead2075c8bed
Component: engine
This moves base device creation function in a separate function. Pure
code reorganization. Makes reading code little easier.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: efc1ddd7e3341124a2ebbb8a358f44754b32f310
Component: engine
This patch does three things. Following are the descriptions.
===
Create a separate function for delete transactions so that parent function
is little smaller.
Also close transaction if an error happens.
===
When docker is being shutdown, save deviceset metadata first before
trying to remove the devices. Generally caller gives only 10 seconds
for shutdown to complete and then kills it after that. So if some device
is busy, we will wait 20 seconds for it removal and never be able to save
metadata. So first save metadata and then deal with device removal.
===
Move issue discard operation in a separate function. This makes reading code
little easier.
Also don't issue discards if device is still open. That means devices is
still probably being used and issuing discards is not a good idea.
This is especially true in case of deferred deletion. We want to issue
discards when device is not open. At that time device can be deleted too.
Otherwise we will issue discards and deletion will actually fail. Later
we will try deletion again and issue discards again and deletion will
fail again as device is open and busy.
So this will ensure that discards are issued once when device is not open
and it can actually be deleted.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 482eca3099ad4bf3a7db62a31f88e2158cbbc933
Component: engine
Right now we seem to have 3 locks.
- devinfo.lock
This is a per device lock
- metaData.devicesLock
This is supposedely protecting map of devices.
- Global DeviceSet lock
This is protecting map of devices as well as serializing calls to libdevmapper.
Semantics of per devices lock and global deviceset lock seem to be very clear.
Even ordering between these two locks has been defined properly.
What is not clear is the need and ordering of metaData.devicesLock. Looks like
this lock is not necessary and global DeviceSet lock should be used to
protect map of devices as it is part of DeviceSet.
This patchset gets rid of metaData.devicesLock and instead uses DeviceSet
lock to protect map of devices.
Also at couple of places during initialization takes devices.Lock(). That
is not strictly necessary as there is supposed to be one thread of execution
during initializaiton. Still it makes the code clearer.
I think this makes code more clear and easier to understand and easier to
make further changes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 289145ecc6c016b8bb6797cc50905e34da911e84
Component: engine
Looks like nobody is calling HasActivatedDevice(). Get rid of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 73f8b46d84e73929eacafe4c2f9676469f862c49
Component: engine
maxDeviceID is upper limit on device Id thin pool can support. Right now
we have this check only during startup. It is a good idea to move this
check in loadMetadata so that any time a device file is loaded and if it
is corrupted and device Id is more than maxDevieceID, it will be detected
right then and there.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 94caae2477f42b55adeab22f14bcef22b90373d6
Component: engine
Use deactivateDevice() instead of removeDevice() directly. This will make
sure for device deletion, deferred removal is used if user has configured
it in. Also this makes reading code litle easier as there is single function
to remove a device and that is deactivateDevice().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 39081eb3aa8f715c1da6f798c6531efd7a8a494c
Component: engine
If a device is still mounted at the time of DeleteDevice(), that means
higher layers have not called Put() properly on the device and are trying
to delete it. This is a bug in the code where Get() and Put() have not been
properly paired up. Fail device deletion if it is still mounted.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: e97e46b7376c3195383636d305d832b2ba3f82c5
Component: engine
Exists() and HasDevice() just check if device file exists or not. It does
not say anything about if device is mounted or not. Fix comments.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: f5c0eb9ffe9a9d30ac6ff81fa1a4c216908189a6
Component: engine
device has map (device.Devices), contains valid devices and we skip all
the files which are not device files. transaction metadata file is not
device file. Skip this file when devices files are being read and loaded
into map.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: ba02bf31cbffe329e549516e0004cf113ab4517e
Component: engine
The mount syscall does not handle string flags like "noatime",
we must use bitmasks like MS_NOATIME instead.
pkg/mount.Mount already handles this work.
Signed-off-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Upstream-commit: 9a64f2bbb3d8fed35bb094c73dac54a13dcf7369
Component: engine
Fixes: #15279
Due to
7904946eeb
the devices field is dropped.
This solution works on go1.4 and go1.5
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Upstream-commit: f83d05c3be3c3bcc84f6fa229504848ee8078321
Component: engine
TL;DR: check for IsExist(err) after a failed MkdirAll() is both
redundant and wrong -- so two reasons to remove it.
Quoting MkdirAll documentation:
> MkdirAll creates a directory named path, along with any necessary
> parents, and returns nil, or else returns an error. If path
> is already a directory, MkdirAll does nothing and returns nil.
This means two things:
1. If a directory to be created already exists, no error is returned.
2. If the error returned is IsExist (EEXIST), it means there exists
a non-directory with the same name as MkdirAll need to use for
directory. Example: we want to MkdirAll("a/b"), but file "a"
(or "a/b") already exists, so MkdirAll fails.
The above is a theory, based on quoted documentation and my UNIX
knowledge.
3. In practice, though, current MkdirAll implementation [1] returns
ENOTDIR in most of cases described in #2, with the exception when
there is a race between MkdirAll and someone else creating the
last component of MkdirAll argument as a file. In this very case
MkdirAll() will indeed return EEXIST.
Because of #1, IsExist check after MkdirAll is not needed.
Because of #2 and #3, ignoring IsExist error is just plain wrong,
as directory we require is not created. It's cleaner to report
the error now.
Note this error is all over the tree, I guess due to copy-paste,
or trying to follow the same usage pattern as for Mkdir(),
or some not quite correct examples on the Internet.
[v2: a separate aufs commit is merged into this one]
[1] https://github.com/golang/go/blob/f9ed2f75/src/os/path.go
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Upstream-commit: a83a76934787a20e96389d33bd56a09369f9b808
Component: engine
