This allows for easy extension of adding more parameters to existing
parameters list. Otherwise adding a single parameter changes code
at so many places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: b937aa8e6968d805527d163e6f477d496ceb88d7
Component: engine
Use module name logrus instead of log.
Use logrus.[Error|Warn|Debug|Fatal|Panic|Info]f instead of w/o f
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Upstream-commit: 6a1183b3ae512961f41a8ccfc8205e08294216f4
Component: engine
For things that we can check if they are mounted by using their fsmagic
we should use that and for others do it the slow way.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 1ba05cdb6ade7e3abd4c4c3221b5e27645460111
Component: engine
Now supports setting a containers storage size when using zfs as the
storage engine. By passing in `--storage-opt size=<size>`, the created
container's storage size will be limited to the given size. Note that
the way zfs works, the given specified storage size will be given in
addition to the base container size.
Example:
The node image reports a size of `671M` from `df -h` when started.
Setting `--storage-opt size=2G` will result in a drive the size of
`671M` + `2G`, `2.7G` in total. Available space will be `2.0G`.
The storage size is achieved by setting the zfs option `quota` to the
given size on the zfs volume.
Signed-off-by: Ken Herner <kherner@progress.com>
Upstream-commit: e91834043100a6ae3f80c21fd15daccc2f451528
Component: engine
This makes sure fsdiff doesn't try to unmount things that shouldn't be.
**Note**: This is intended as a temporary solution to have as minor a
change as possible for 1.11.1. A bigger change will be required in order
to support container re-attach.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 7342060b070df67481f8da4f394a57cac1671d56
Component: engine
Since the layer store was introduced, the level above the graphdriver
now differentiates between read/write and read-only layers. This
distinction is useful for graphdrivers that need to take special steps
when creating a layer based on whether it is read-only or not.
Adding this parameter allows the graphdrivers to differentiate, which
in the case of the Windows graphdriver, removes our dependence on parsing
the id of the parent for "-init" in order to infer this information.
This will also set the stage for unblocking some of the layer store
unit tests in the next preview build of Windows.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Upstream-commit: ef5bfad3210a9e9c8b761f2c11c0c6289490ebff
Component: engine
Instead of implementing refcounts at each graphdriver, implement this in
the layer package which is what the engine actually interacts with now.
This means interacting directly with the graphdriver is no longer
explicitly safe with regard to Get/Put calls being refcounted.
In addition, with the containerd, layers may still be mounted after
a daemon restart since we will no longer explicitly kill containers when
we shutdown or startup engine.
Because of this ref counts would need to be repopulated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 65d79e3e5e537039b244afd7eda29e721a93d84f
Component: engine
Instead of implementing refcounts at each graphdriver, implement this in
the layer package which is what the engine actually interacts with now.
This means interacting directly with the graphdriver is no longer
explicitly safe with regard to Get/Put calls being refcounted.
In addition, with the containerd, layers may still be mounted after
a daemon restart since we will no longer explicitly kill containers when
we shutdown or startup engine.
Because of this ref counts would need to be repopulated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 563d0711f83952e561a0d7d5c48fef9810b4f010
Component: engine
Fixes issues with layer remounting (e.g. a running container which then
has `docker cp` used to copy files in or out) by applying the same
refcounting implementation that exists in other graphdrivers like
overlay and aufs.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 922986b76e2ac596faed6a724cebcf7082174980
Component: engine
Fix root directory of the mountpoint being owned by real root. This is
unique to ZFS because of the way file mountpoints are created using the
ZFS tooling, and the remapping that happens at layer unpack doesn't
impact this root (already created) holding directory for the layer.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: aef0995b02a5a90ad74e6d91901d7bc8a9713796
Component: engine
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Upstream-commit: 1716d497a420f0cd4e53a99535704c6d215e38c7
Component: engine
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 442b45628ee12ebd8e8bd08497896d5fa8eec4bd
Component: engine
Commit e27c904 added a wrong and misleading comment
to GetMetadata(). Fix it using the wording from
commit 407a626 which introduced GetMetadata().
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Upstream-commit: 15a232fd06e062f8aae4e89e1f520f44c875daeb
Component: engine
These functions are not part of the graphdriver.Driver
interface and should therefore be private.
Also, remove comments added by commit e27c904 as they are
* pretty obvious
* no longer required by golint
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Upstream-commit: f5f7fee2ecc964314b2a7b910fda71a157c90f16
Component: engine
TL;DR: check for IsExist(err) after a failed MkdirAll() is both
redundant and wrong -- so two reasons to remove it.
Quoting MkdirAll documentation:
> MkdirAll creates a directory named path, along with any necessary
> parents, and returns nil, or else returns an error. If path
> is already a directory, MkdirAll does nothing and returns nil.
This means two things:
1. If a directory to be created already exists, no error is returned.
2. If the error returned is IsExist (EEXIST), it means there exists
a non-directory with the same name as MkdirAll need to use for
directory. Example: we want to MkdirAll("a/b"), but file "a"
(or "a/b") already exists, so MkdirAll fails.
The above is a theory, based on quoted documentation and my UNIX
knowledge.
3. In practice, though, current MkdirAll implementation [1] returns
ENOTDIR in most of cases described in #2, with the exception when
there is a race between MkdirAll and someone else creating the
last component of MkdirAll argument as a file. In this very case
MkdirAll() will indeed return EEXIST.
Because of #1, IsExist check after MkdirAll is not needed.
Because of #2 and #3, ignoring IsExist error is just plain wrong,
as directory we require is not created. It's cleaner to report
the error now.
Note this error is all over the tree, I guess due to copy-paste,
or trying to follow the same usage pattern as for Mkdir(),
or some not quite correct examples on the Internet.
[v2: a separate aufs commit is merged into this one]
[1] https://github.com/golang/go/blob/f9ed2f75/src/os/path.go
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Upstream-commit: a83a76934787a20e96389d33bd56a09369f9b808
Component: engine
The ZFS driver should raise proper errors when the ZFS utility is
missing or when there's no zfs partition active on the system. Raising the
proper errors make possible to silently ignore the ZFS storage
driver when no default storage driver is specified.
Previous to this commit it was no longer possible to start the
docker daemon in that way:
docker -d --storage-opt dm.loopdatasize=2GB
The above command resulted in an exit error because the ZFS driver
tried to use the storage options.
Signed-off-by: Flavio Castelli <fcastelli@suse.com>
Upstream-commit: f95b3a6b6a4d86c6373e24b83ba1a008bf107265
Component: engine
Replaced github.com/docker/libcontainer with
github.com/opencontainers/runc/libcontaier.
Also I moved AppArmor profile generation to docker.
Main idea of this update is to fix mounting cgroups inside containers.
After updating docker on CI we can even remove dind.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: c86189d554ba14aa04b6314970d3699e5ddbf4de
Component: engine
Export image/container metadata stored in graph driver. Right now 3 fields
DeviceId, DeviceSize and DeviceName are being exported from devicemapper.
Other graph drivers can export fields as they see fit.
This data can be used to mount the thin device outside of docker and tools
can look into image/container and do some kind of inspection.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Upstream-commit: 407a626be62996cd6385ea4d80e669ab83f5f04d
Component: engine
Previously the cache was only updated once on startup, because the graph
code only check for filesystems on startup. However this breaks the API as it
was supposed and so unit tests.
Fixes#13142
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Upstream-commit: 2cb23527e4f3f74a9fb98ddc7c0c11c50c3f07d2
Component: engine
The docker graph call driver.Exists() on initialisation for each filesystem in
the graph. This results will results in a lot `zfs get all` commands. To reduce
this, retrieve all descend filesystem at startup and cache it for later checks
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Upstream-commit: bad25ccf978b56da6fa181439504ab33906524cd
Component: engine
instead of let zfs automaticly mount datasets, mount them on demand using mount(2).
This speed up this graph driver in 2 ways:
- less zfs processes needed to start a container
- /proc/mounts get smaller, so zfs userspace tools has less to read (which can
a significant amount of data as the number of layer grows)
This ways it can be also ensured that the correct mountpoint is always used.
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Upstream-commit: 11e9167a6b45fdc134ee43e89abefd34a85cf624
Component: engine
