After running the test suite with the race detector enabled I found
these gems that need to be fixed.
This is just round one, sadly lost my test results after I built the
binary to test this... (whoops)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 7917a36cc787ada58987320e67cc6d96858f3b55
Component: engine
Signed-off-by: Roberto Muñoz Fernández <robertomf@gmail.com>
Added an apparmorEnabled boolean in the Daemon struct to indicate if AppArmor is enabled or not. It is set in NewDaemon using sysInfo information.
Signed-off-by: Roberto Muñoz Fernández <robertomf@gmail.com>
gofmt'd
Signed-off-by: Roberto Muñoz Fernández <robertomf@gmail.com>
change the function name to something more adequate and changed the behaviour to show empty value on an apparmor disabled system.
Signed-off-by: Roberto Muñoz Fernández <robertomf@gmail.com>
go fmt
Signed-off-by: Roberto Muñoz Fernández <robertomf@gmail.com>
Upstream-commit: d97a00dfd5ec884a98e087b1fc6e705459ca81e9
Component: engine
Validation is still done by swarmkit on the service side.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: ef39256dfb711f8382a5c021b85d6c7d613282b0
Component: engine
Fixes#22564
When an error occurs on mount, there should not be any call later to
unmount. This can throw off refcounting in the underlying driver
unexpectedly.
Consider these two cases:
```
$ docker run -v foo:/bar busybox true
```
```
$ docker run -v foo:/bar -w /foo busybox true
```
In the first case, if mounting `foo` fails, the volume driver will not
get a call to unmount (this is the incorrect behavior).
In the second case, the volume driver will not get a call to unmount
(correct behavior).
This occurs because in the first case, `/bar` does not exist in the
container, and as such there is no call to `volume.Mount()` during the
`create` phase. It will error out during the `start` phase.
In the second case `/bar` is created before dealing with the volume
because of the `-w`. Because of this, when the volume is being setup
docker will try to copy the image path contents in the volume, in which
case it will attempt to mount the volume and fail. This happens during
the `create` phase. This makes it so the container will not be created
(or at least fully created) and the user gets the error on `create`
instead of `start`. The error handling is different in these two phases.
Changed to only send `unmount` if the volume is mounted.
While investigating the cause of the reported issue I found some odd
behavior in unmount calls so I've cleaned those up a bit here as well.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: 9a2d0bc3adc0c21c82cd1974be45ea0449f9f224
Component: engine
Convert this to lower before checking the message of the error.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 47637b49a0fbd62a25702859f0993666c63ff562
Component: engine
This adds a metrics packages that creates additional metrics. Add the
metrics endpoint to the docker api server under `/metrics`.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add metrics to daemon package
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
api: use standard way for metrics route
Also add "type" query parameter
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Convert timers to ms
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 3343d234f3b131d4be1d4ca84385e184633a79bd
Component: engine
This moves the types for the `engine-api` repo to the existing types
package.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 91e197d614547f0202e6ae9b8a24d88ee131d950
Component: engine
Before this, container's auto-removal after exit is done in a goroutine,
this commit will get ContainerRm out of the goroutine.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 1537dbe2d617013c94aa42c28744feb07a09fb63
Component: engine
`--rm` is a client side flag which caused lots of problems:
1. if client lost connection to daemon, including client crash or be
killed, there's no way to clean garbage container.
2. if docker stop a `--rm` container, this container won't be
autoremoved.
3. if docker daemon restart, container is also left over.
4. bug: `docker run --rm busybox fakecmd` will exit without cleanup.
In a word, client side `--rm` flag isn't sufficient for garbage
collection. Move the `--rm` flag to daemon will be more reasonable.
What this commit do is:
1. implement a `--rm` on daemon side, adding one flag `AutoRemove` into
HostConfig.
2. Allow `run --rm -d`, no conflicting `--rm` and `-d` any more,
auto-remove can work on detach mode.
3. `docker restart` a `--rm` container will succeed, the container won't
be autoremoved.
This commit will help a lot for daemon to do garbage collection for
temporary containers.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 3c2886d8a45d8e79b00ab413d91f1af871b58d0a
Component: engine
In order to keep a little bit of "sanity" on the API side, validate
hostname only starting from v1.24 API version.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 6daf3d2a783fd042e870c8af8bbd19fc28989505
Component: engine
Currently `start` will hide some errors and throw a consolidated error,
which will make it hard to debug because developer can't find the
original error.
This commit allow daemon to log original errors first.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: b4740e3021a39a502ffc82f0f70e9b7ed2f0875f
Component: engine
If contaner start fail of (say) "command not found", the container
actually didn't start at all, we shouldn't log start and die event for
it, because that doesnt actually happen.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 5548966c37147875fb5e07f4ba7f633dd882c782
Component: engine
When container is automatically restarted based on restart policy,
docker events can't get "start" event but only get "die" event, this is
not consistent with previous behavior. This commit will add "start"
event back.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: fdfaaeb9aa72404bde5207510bf5910893414b5d
Component: engine
- Refactor generic and path based cleanup functions into a single function.
- Include aufs and zfs mounts in the mounts cleanup.
- Containers that receive exit event on restore don't require manual cleanup.
- Make missing sandbox id message a warning because currently sandboxes are always cleared on startup. libnetwork#975
- Don't unmount volumes for containers that don't have base path. Shouldn't be needed after #21372
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Upstream-commit: 05cc737f5411a0effd299429140d031c4ad8dd05
Component: engine
so that the user knows what's not in the container but should be.
Its not always easy for the user to know what exact command is being run
when the 'docker run' is embedded deep in something else, like a Makefile.
Saw this while dealing with the containerd migration.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: 79421606388169151c31d1c34079a98f53170ab8
Component: engine
Attach can hang forever if there is no data to send. This PR adds notification
of Attach goroutine about container stop.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Upstream-commit: 7bb815e2960c97c5cc0624566ac51581bdd884ab
Component: engine
Correct creation of a non-existing WORKDIR during docker build to use
remapped root uid/gid on mkdir
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 799a6b94ee661022d66f88a009ff58f08eb5a2c3
Component: engine
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: a793564b2591035aec5412fbcbcccf220c773a4c
Component: engine
We should support update swap memory without memory.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 8ae6f6ac28c1e9e28c1503b8118691580b66d885
Component: engine
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: ff3ea4c90f2ede5cccc6b49c4d2aad7201c91a4c
Component: engine
When a container is created it is registered before the mount is created. This can lead to mount does not exist errors when inspecting between create and mount.
Fixes#18753
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: d8e090669ed4d9b27206d7f8797c01ed4b2cd20f
Component: engine
Don't involve code waiting for blocking channel in locked critical
section because it has potential risk of hanging forever.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 1326f0cba5f933674e23769de1385d3b0841e758
Component: engine
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 7ac4232e70fe7cf7318333cd0890db7f95663079
Component: engine
`adaptContainerSettings` is growing up, new it's only called
when create. It'll be a problem that old containers will never
have chance to adapt the latest rule. `HostConfig` of these
containers will be obsoleted.
Add this calling to start to avoid problems like #18550 and
avoid such backward compatability in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: f408b4f4639b7c987c93b26174fccfcc513519e4
Component: engine
