This fixes two problems:
1. docker run --device /dev/sda:rw ubuntu bash doesn't work
2. --device /dev/zero:/dev/noro:ro doesn't show clear error message,
but fail when writing to cgroup file.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 429423624c61b38efeaeda95792077a0da65c4ef
Component: engine
This reverts commit 40b71adee390e9c06471b89ed845132b4ec80177.
Original commit (for which this is effectively a rebased version) is
72a500e9e5929b038816d8bd18d462a19e571c99 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
Upstream-commit: 03f65b3d0d66ccdc8b69a447b75508d594007600
Component: engine
It may happen that host system settings are changed while the daemon is running.
This will cause errors at libcontainer level when starting a container with a
particular hostConfig (e.g. hostConfig with memory swappiness but the memory
cgroup was umounted).
This patch adds an hostConfig check on container start to prevent the daemon
from even calling libcontainer with the wrong configuration as we're already
doing on container's creation).
Signed-off-by: Antonio Murdaca <runcom@linux.com>
(cherry picked from commit 0d2628cdf19783106ae8723f51fae0a7c7f361c6)
Upstream-commit: 4177b0bae04bb41dfff65ea87b2efb87811e08e6
Component: engine
So we marshal/unmarshal its value properly when it's empty.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 4e25d2982b3af25bf55b8bc788d4604f7b539ea4
Component: engine
This reverts the change in 5170a2c096 that made ParseDevice private
Signed-off-by: Darren Shepherd <darren@rancher.com>
Upstream-commit: 421786e9254b728298397b8ae3e81e9f6259f369
Component: engine
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 96ce3a194aab2807fdd638825b9ea7cb9ba55c36
Component: engine
Remove volume stubs and use the experimental path as the only path.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: c4d45b6a29a91f2fb5d7a51ac36572f2a9b295c6
Component: engine
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 6f8ddec1d0e67058c7a4a15c7d4d9a75bc1e5dea
Component: engine
Closes#14621
This one grew to be much more than I expected so here's the story... :-)
- when a bad port string (e.g. xxx80) is passed into container.create()
via the API it wasn't being checked until we tried to start the container.
- While starting the container we trid to parse 'xxx80' in nat.Int()
and would panic on the strconv.ParseUint(). We should (almost) never panic.
- In trying to remove the panic I decided to make it so that we, instead,
checked the string during the NewPort() constructor. This means that
I had to change all casts from 'string' to 'Port' to use NewPort() instead.
Which is a good thing anyway, people shouldn't assume they know the
internal format of types like that, in general.
- This meant I had to go and add error checks on all calls to NewPort().
To avoid changing the testcases too much I create newPortNoError() **JUST**
for the testcase uses where we know the port string is ok.
- After all of that I then went back and added a check during container.create()
to check the port string so we'll report the error as soon as we get the
data.
- If, somehow, the bad string does get into the metadata we will generate
an error during container.start() but I can't test for that because
the container.create() catches it now. But I did add a testcase for that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Upstream-commit: 12b6083c8f82db7e5db4c683cfe20151731ea851
Component: engine
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: dfc6c04fa3f7dcb0e78e9dd5e8e4dd285b98546d
Component: engine
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Upstream-commit: 921da495d24695dda66d3f58e78887dd0bc2402e
Component: engine
There is no reason to error out or not do what the user expects when -i
is specified on the cli. We should always attach to the stdin of the
container in this situation.
Closes#14390
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 691b2851f7b745d225a2698b964cf60f55a0c4d7
Component: engine
By convention /pkg is safe to use from outside the docker tree, for example
if you're building a docker orchestrator.
/nat currently doesn't have any dependencies outside of /pkg, so it seems
reasonable to move it there.
This rename was performed with:
```
gomvpkg -vcs_mv_cmd="git mv {{.Src}} {{.Dst}}" \
-from github.com/docker/docker/nat \
-to github.com/docker/docker/pkg/nat
```
Signed-off-by: Peter Waller <p@pwaller.net>
Upstream-commit: 9c2374d19623581028f070bc93fa4c60a660dce4
Component: engine
This commit makes use of the CNM model supported by LibNetwork and
provides an ability to let a container to publish a specified service.
Behind the scenes, if a service with the given name doesnt exist, it is
automatically created on appropriate network and attach the container.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 1ac350a0ecfe9d28c82d6dff6a763a378ff9c472
Component: engine
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: da5a3e6dee80f1f5d4059851e4762ffb0484f7e9
Component: engine
