Signed-off-by: hsinko <21551195@zju.edu.cn>
id in example request should be a exact value
Signed-off-by: hsinko <21551195@zju.edu.cn>
revert v1.22 doc
Signed-off-by: hsinko <21551195@zju.edu.cn>
fix tiny errors
Signed-off-by: hsinko <21551195@zju.edu.cn>
Upstream-commit: 5642cdeac5df08414744203235462a6b99261239
Component: engine
* Add network mode `none` to list of possible values for API version 1.15 - 1.23
* For API version 1.21 - 1.23 add explanation that any other value is taken as a custom network's name
Signed-off-by: Roland Huß <roland@jolokia.org>
Upstream-commit: c80b36c938306ef9cc9ad6865cfc251a694f59aa
Component: engine
A value of -1 disables the *limit* so enables unlimited swap
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 1c95b858ac040974d2be73bb31d0d59af9b0b960
Component: engine
Fixing the links
Updating with Seb's comments
Adding weight
Fixing the engine aliases
Updating after Arun pushed
Removing empty file
Signed-off-by: Mary Anthony <mary@docker.com>
Upstream-commit: e310d070f498a2ac494c6d3fde0ec5d6e4479e14
Component: engine
* If user doesn't specify the subnets to create a network, it will pick
subnets from inside preferred pool. This PR aims to inspect these subnets info
* Add integration tests for docker inspect the subnets.
* docker-py project is already synchronized.
* jenkins checks depend on https://github.com/docker/docker-py/pull/888
Fixes issue #18626
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
Upstream-commit: 5cc672b0061f3df41073cb7b4ff962998a13a09c
Component: engine
docker's network disconnect api now supports `Force` option which can be
used to force cleanup an endpoint from any host in the cluster.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: b464f1d78cdfa2a4124e083b8f7b0f2353f12de3
Component: engine
This allows to define clearly what is mutable or not in a container
and remove the use of the internal HostConfig struct to be used.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: a4f6920731c6af27a7e89c3da8d0e6fd309de90a
Component: engine
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: 15aa2a663b47b6126a66efefcadb64edfbffb9f5
Component: engine
It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Upstream-commit: 8799c4fc0feadede6ae60e77bd7d9dfd7cc72a79
Component: engine
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 26dd026bd70c9c18a16b0e339821c309e56d8ff0
Component: engine
After addition of multi-host networking in Docker 1.9, Docker Remote
API is still returning only the network specified during creation
of the container in the “List Containers” (`/containers/json`) endpoint:
...
"HostConfig": {
"NetworkMode": "default"
},
The list of networks containers are attached to is only available at
Get Container (`/containers/<id>/json`) endpoint.
This does not allow applications utilizing multi-host networking to
be built on top of Docker Remote API.
Therefore I added a simple `"NetworkSettings"` section to the
`/containers/json` endpoint. This is not identical to the NetworkSettings
returned in Get Container (`/containers/<id>/json`) endpoint. It only
contains a single field `"Networks"`, which is essentially the same
value shown in inspect output of a container.
This change adds the following section to the `/containers/json`:
"NetworkSettings": {
"Networks": {
"bridge": {
"EndpointID": "2cdc4edb1ded3631c81f57966563e...",
"Gateway": "172.17.0.1",
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"MacAddress": "02:42:ac:11:00:02"
}
}
}
This is of type `SummaryNetworkSettings` type, a minimal version of
`api/types#NetworkSettings`.
Actually all I need is the network name and the IPAddress fields. If folks
find this addition too big, I can create a `SummaryEndpointSettings` field
as well, containing just the IPAddress field.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Upstream-commit: 755f8609f699a20cb47ec7269e3a9469541a9419
Component: engine
This changes deivce to device in daemon, test and docs.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Upstream-commit: 7c077c2c3443fdb9b13b7790bc96cdaa287cf381
Component: engine
Closing the HTTP connection requesting a push or pull will cancel the
push or pull. This behavior also applies to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: d92e7ad7356e10c86e7dc479356578ac40fd2bbd
Component: engine
This change allows API clients to retrieve an authentication token from
a registry, and then pass that token directly to the API.
Example usage:
REPO_USER=dhiltgen
read -s PASSWORD
REPO=privateorg/repo
AUTH_URL=https://auth.docker.io/token
TOKEN=$(curl -s -u "${REPO_USER}:${PASSWORD}" "${AUTH_URL}?scope=repository:${REPO}:pull&service=registry.docker.io" |
jq -r ".token")
HEADER=$(echo "{\"registrytoken\":\"${TOKEN}\"}"|base64 -w 0 )
curl -s -D - -H "X-Registry-Auth: ${HEADER}" -X POST "http://localhost:2376/images/create?fromImage=${REPO}"
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Upstream-commit: 8dce8e9901501863a80caf47d71713d4d36925a3
Component: engine
Consolidate all the API to same time format: RFC3339, and it will be
client's responsibility to present it in more user friendly way.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Upstream-commit: 9daca1222adabf3aeae97a2c4e5f4ed1bb8c15e1
Component: engine
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Upstream-commit: d3af7f283d8dc0be67be48e14cd740fbeb690f7a
Component: engine
These changes were made as part of https://github.com/docker/docker/pull/17478
but inadvertently added to the v1.21 API version.
Also added a short description to the API changelog.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: a06d5273b3cb72f68fc32da26955842287314970
Component: engine
