For obvious reasons that it is not really supported now.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 5a9b5f10cf967f31f0856871ad08f9a0286b4a46
Component: engine
Before this commit if "--config-file" wasn't set the daemon would use
the default configuration file which is "/etc/docker/daemon.json".
When attempting to reload the daemon if that file didn't exist
and error message would display.
This behaviour is changed in a way that if the default configuration
file does not exist and no other configuration file is set
the daemon uses an empty configuration which later will be updated
and reloaded using the "reload" function given as an argument in Reload.
However, if the "--config-file" is set and the file is removed
or renamed an error message will be displayed and no reload will be done.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Upstream-commit: 0f8119a87dc301e9543c45c416d6b4545da1fc46
Component: engine
The `--enable-api-cors` flag was deprecated in f3dd2db4ff7de1399a49af928cd3eae4fccf8764,
and marked for removal in docker 17.09 through 85f92ef3590b386ea17e3948262725a2d3ce4db5.
This patch removes the deprecated flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 7d4eab554379524c2421a7ecd3319d1d087d1de2
Component: engine
Since the commit d88fe447df0e8 ("Add support for sharing /dev/shm/ and
/dev/mqueue between containers") container's /dev/shm is mounted on the
host first, then bind-mounted inside the container. This is done that
way in order to be able to share this container's IPC namespace
(and the /dev/shm mount point) with another container.
Unfortunately, this functionality breaks container checkpoint/restore
(even if IPC is not shared). Since /dev/shm is an external mount, its
contents is not saved by `criu checkpoint`, and so upon restore any
application that tries to access data under /dev/shm is severily
disappointed (which usually results in a fatal crash).
This commit solves the issue by introducing new IPC modes for containers
(in addition to 'host' and 'container:ID'). The new modes are:
- 'shareable': enables sharing this container's IPC with others
(this used to be the implicit default);
- 'private': disables sharing this container's IPC.
In 'private' mode, container's /dev/shm is truly mounted inside the
container, without any bind-mounting from the host, which solves the
issue.
While at it, let's also implement 'none' mode. The motivation, as
eloquently put by Justin Cormack, is:
> I wondered a while back about having a none shm mode, as currently it is
> not possible to have a totally unwriteable container as there is always
> a /dev/shm writeable mount. It is a bit of a niche case (and clearly
> should never be allowed to be daemon default) but it would be trivial to
> add now so maybe we should...
...so here's yet yet another mode:
- 'none': no /dev/shm mount inside the container (though it still
has its own private IPC namespace).
Now, to ultimately solve the abovementioned checkpoint/restore issue, we'd
need to make 'private' the default mode, but unfortunately it breaks the
backward compatibility. So, let's make the default container IPC mode
per-daemon configurable (with the built-in default set to 'shareable'
for now). The default can be changed either via a daemon CLI option
(--default-shm-mode) or a daemon.json configuration file parameter
of the same name.
Note one can only set either 'shareable' or 'private' IPC modes as a
daemon default (i.e. in this context 'host', 'container', or 'none'
do not make much sense).
Some other changes this patch introduces are:
1. A mount for /dev/shm is added to default OCI Linux spec.
2. IpcMode.Valid() is simplified to remove duplicated code that parsed
'container:ID' form. Note the old version used to check that ID does
not contain a semicolon -- this is no longer the case (tests are
modified accordingly). The motivation is we should either do a
proper check for container ID validity, or don't check it at all
(since it is checked in other places anyway). I chose the latter.
3. IpcMode.Container() is modified to not return container ID if the
mode value does not start with "container:", unifying the check to
be the same as in IpcMode.IsContainer().
3. IPC mode unit tests (runconfig/hostconfig_test.go) are modified
to add checks for newly added values.
[v2: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-51345997]
[v3: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-53902833]
[v4: addressed the case of upgrading from older daemon, in this case
container.HostConfig.IpcMode is unset and this is valid]
[v5: document old and new IpcMode values in api/swagger.yaml]
[v6: add the 'none' mode, changelog entry to docs/api/version-history.md]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 7120976d74195a60334c688a061270a4d95f9aeb
Component: engine
Add daemon config to allow the user to specify the MTU of the control plane network.
The first user of this new parameter is actually libnetwork that can seed the
gossip with the proper MTU value allowing to pack multiple messages per UDP packet sent.
If the value is not specified or is lower than 1500 the logic will set it to the default.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Upstream-commit: f9f25ca5e44c89d7c1ebdfa9865076eb2cde9bb2
Component: engine
Allows storing key under any directory. In the case where the
"/etc/docker" directory is not preserved, this file can be
specified to a location where it will be preserved to ensure
the ID does not change across restarts.
Note this key is currently only used today to generate the ID
used in Docker info and for manifest schema v1 pushes. The key
signature and finger on these manifests are not checked or
used any longer for security, deprecated by notary.
Removes old key migration from a pre-release of Docker which put
the key under the home directory and was used to preserve ID used
for swarm v1 after the file moved.
closes#32135
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Upstream-commit: e428c824c35e85a02fffee592b79ab7db1a0c4d2
Component: engine
plugins exist in a chain that composes potentially mutating requests and
responses. This simply reverts the sorting of AuthZ plugins so that the
/info API endpoint returns the internal ordering used for AuthZ composition.
Volume driver plugins are not affected because they are just a set.
Signed-off-by: David Sheets <dsheets@docker.com>
Upstream-commit: cfcf2a0cec8d83c1584020ccaab0c94f5bb6d7d4
Component: engine
I noticed that we're using a homegrown package for assertions. The
functions are extremely similar to testify, but with enough slight
differences to be confusing (for example, Equal takes its arguments in a
different order). We already vendor testify, and it's used in a few
places by tests.
I also found some problems with pkg/testutil/assert. For example, the
NotNil function seems to be broken. It checks the argument against
"nil", which only works for an interface. If you pass in a nil map or
slice, the equality check will fail.
In the interest of avoiding NIH, I'm proposing replacing
pkg/testutil/assert with testify. The test code looks almost the same,
but we avoid the confusion of having two similar but slightly different
assertion packages, and having to maintain our own package instead of
using a commonly-used one.
In the process, I found a few places where the tests should halt if an
assertion fails, so I've made those cases (that I noticed) use "require"
instead of "assert", and I've vendored the "require" package from
testify alongside the already-present "assert" package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 6052f2b3969feadb01662d8e2f30337d9c7f61af
Component: engine
- Moved DefaultInitBinary from daemon/daemon.go to
daemon/config/config.go since it's a daemon config and is referred in
config package files.
- Added condition in GetInitPath to check for any explicitly configured
DefaultInitBinary. If not, the default value of DefaultInitBinary is
returned.
- Changed all references of DefaultInitBinary to refer to the variable
from new location.
- Added TestCommonUnixGetInitPath to test for the various values of
GetInitPath.
Fixes#32314
Signed-off-by: Sunny Gogoi <indiasuny000@gmail.com>
Upstream-commit: 17b128876028022991e2dbcb2cc402cc81b451e5
Component: engine
When the daemon is configured to run with an authorization-plugin and if
the plugin is disabled, the daemon continues to send API requests to the
plugin and expect it to respond. But the plugin has been disabled. As a
result, all API requests are blocked. Fix this behavior by removing the
disabled plugin from the authz middleware chain.
Tested using riyaz/authz-no-volume-plugin and observed that after
disabling the plugin, API request/response is functional.
Fixes#31836
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Upstream-commit: 38de272bd4dfea945985b7031cd353ac5f6507c5
Component: engine
--max-concurrent-downloads,--max-concurrent-uploads must great than or equal to 0
Upstream-commit: dc1b0e1b2c8483e0f2eaa28316be01aae6d6ae4a
Component: engine
This also moves some cli specific in `cmd/dockerd` as it does not
really belong to the `daemon/config` package.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: db63f9370e26d725357c703cbaf9ab63cc7b6d0a
Component: engine
