Prior to this change, the "docker network inspect" contains only the
endpoints that have active local container. This excludes all the remote
and stale endpoints. By including all the endpoints, it makes debugging
much simpler and also allows the user to cleanup any stale endpoints
using "docker network disconnect -f {network} {endpoint-name}".
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 2ef00ba89fc04b0a7571aa050d8a11c06f758d9b
Component: engine
Allowing to set their values in the daemon configuration file.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 59586d02b1cc004f14cd7ff6b454211f562da326
Component: engine
Update unit test and documentation to handle the new case where Username
is set to <token> to indicate an identity token is involved.
Change the "Password" field in communications with the credential helper
to "Secret" to make clear it has a more generic purpose.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: ba0aa5311aa27fe77166f03d8bcc0174e2985913
Component: engine
Dump from 1.10.1 has this fields.
Signed-off-by: Kanstantsin Shautsou <kanstantsin.sha@gmail.com>
Close and carry #20377
Include David's request
Signed-off-by: Mary Anthony <mary@docker.com>
Upstream-commit: 205844875cb848b04fef401d3e7fcc3a8959bba0
Component: engine
The documentation for Docker 1.10.2 (API version 1.22) mentions under
the "Create a container"[1] section that `HostConfig.Binds` can be given
a "container path" which will automatically "create a new volume for the
container."
I interpreted this to mean it that the following two commands should
have the same net result:
# Create container with data volume via REST API
curl --unix-socket /var/run/docker.sock -XPOST \
http://localhost/containers/create \
-H"Content-Type: application/json" \
-d'{
"Image": "<image-id>",
...
"HostConfig": {
"Binds": [
"/some/data/volume"
]
}
}'
# Create container with data volume via CLI
docker create -v /some/data/volume <image-id> <command>
However, this turned out not the be the case, as the former would create
a mount with no source and no corresponding volume:
...
"Mounts": [
{
"Source": "",
"Destination": "/some/data/volume",
"Driver": "local",
"Mode": "",
"RW": true,
"Propagation": "rprivate"
}
],
...
"Config": {
...
"Volumes": null,
...
}
...whereas the latter would create a volume and mount it:
...
"Mounts": [
{
"Name": "9b38af46d6..."
"Source": "/var/lib/docker/volumes/9b38af46d6.../_data",
"Destination": "/some/data/volume",
"Driver": "local",
"Mode": "",
"RW": true,
"Propagation": ""
}
],
...
"Config": {
...
"Volumes": {
"/some/data/volume": {}
},
...
}
However, if you instead specify the data volume via the `Volumes` key,
then it works as expected, e.g.
curl --unix-socket /var/run/docker.sock -XPOST \
http://localhost/containers/create \
-H"Content-Type: application/json" \
-d'{
"Image": "...",
...
"Volumes": {"/some/data/volume": {}}
}'
...will create a data volume and mount it.
Thus the documentation is either incorrect, or this is a bug and the
ability to create a data volume via `HostConfig.Binds` does not
work as advertised for API version 1.22 (and likely others).
I concluded that the documentation was incorrect. Since I've only
verified this behavior for Docker 1.10.2, I updated the docs for
API versions 1.22 and 1.23, but this may apply to other versions as
well.
[1] https://docs.docker.com/engine/reference/api/docker_remote_api_v1.22/#create-a-container
Signed-off-by: Shane da Silva <shane@dasilva.io>
Upstream-commit: 62fef18d69be7d8c5338fe5a471966dc1e6d68f7
Component: engine
Updates links to Docker Hub with their new
URLs to prevent redirects.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 69004ff67eed6525d56a92fdc69466c41606151a
Component: engine
Allows users to submit options similar to the `mount` command when
creating a volume with the `local` volume driver.
For example:
```go
$ docker volume create -d local --opt type=nfs --opt device=myNfsServer:/data --opt o=noatime,nosuid
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: b05b2370757d7143d761e5e6abb8c0f9b009f737
Component: engine
This change adds "KernelMemory" to the /info endpoint and
shows a warning if KernelMemory is not supported by the kernel.
This makes it more consistent with the other memory-limit
options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 747a486b4aac2ebbbb28bd713b9a4a929f89353b
Component: engine
Move the note more up, to prevent people from starting
the daemon with --userns-remap before touching the files.
Also clarify that these steps must be done *before* enabling
userns-remap and starting the daemon.
Also fixed some minor Markup formatting issues.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 069da069cb5386e6a441f34d5813a94fc738de59
Component: engine
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
Upstream-commit: aee260d4eb3aa0fc86ee5038010b7bbc24512ae5
Component: engine
This change implements communication with an external credentials store,
ala git-credential-helper. The client falls back the plain text store,
what we're currently using, if there is no remote store configured.
It shells out to helper program when a credential store is
configured. Those programs can be implemented with any language as long as they
follow the convention to pass arguments and information.
There is an implementation for the OS X keychain in https://github.com/calavera/docker-credential-helpers.
That package also provides basic structure to create other helpers.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: cf721c23e715e545eccf8484e145c2d18d6a6a23
Component: engine
Changed the Example request in Remote API reference to connect a container to a network
Upstream-commit: 79c24a082004251bd899b8bd549da43e3abca10d
Component: engine
There are five options 'debug' 'labels' 'cluster-store' 'cluster-store-opts'
and 'cluster-advertise' that can be reconfigured, configure any of these
options should not affect other options which may have configured in flags.
But this is not true, for example, I start a daemon with -D to enable the
debugging, and after a while, I want reconfigure the 'label', so I add a file
'/etc/docker/daemon.json' with content '"labels":["test"]' and send SIGHUP to daemon
to reconfigure the daemon, it work, but the debugging of the daemon is also diabled.
I don't think this is a expeted behaviour.
This patch also have some minor refactor of reconfiguration of cluster-advertiser.
Enable user to reconfigure cluster-advertiser without cluster-store in config file
since cluster-store could also be already set in flag, and we only want to reconfigure
the cluster-advertiser.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Upstream-commit: b9366c9609166d41e987608041b5a2079726aa5f
Component: engine
- Allow to filter containers by volume with `--filter volume=name` and `filter volume=/dest`.
- Show their names in the list with the custom format `{{ .Mounts }}`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: bd4fb00fb6241d35537b460a2d9f48256111ae7a
Component: engine
