Remove forked reference package. Use normalized named values
everywhere and familiar functions to convert back to familiar
strings for UX and storage compatibility.
Enforce that the source repository in the distribution metadata
is always a normalized string, ignore invalid values which are not.
Update distribution tests to use normalized values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: 3a1279393faf78632bf169619d407e584da84b66
Component: engine
The `digest` data type, used throughout docker for image verification
and identity, has been broken out into `opencontainers/go-digest`. This
PR updates the dependencies and moves uses over to the new type.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Upstream-commit: 7a855799175b6b984886ef1cfa337d6df1d4c668
Component: engine
Move configurations into a single file.
Abstract download manager in pull config.
Add supports for schema2 only and schema2 type checking.
Add interface for providing push layers.
Abstract image store to generically handle configurations.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Upstream-commit: 3c7676a057a4c0103895f793e407dc6736df139a
Component: engine
When building a manifest during a push operation, all layers must have
an associated descriptor. If a layer is missing a descriptor, that leads
to a panic.
A break inside a switch in layerAlreadyExists meant to break from the
loop surrounding the switch, but instead breaks from the switch. This
causes the loop to continue, and can overwrite the descriptor with an
empty one, leading to the panic.
Also, fix layerAlreadyExists not to abort the push when a speculative
stat on a candidate layer digest fails with an error. This could happen
in situations like a potential cross-repository mount where the user
does not have permission to access the source repository.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: e0702e9f373f5086f53de2485262dde9fc1e7ac2
Component: engine
Classify blobs into three categories based on size.
Use a very limited number of mount attempts and no existence check for
small blobs. Use more attempts for bigger blobs.
Also remember blob associations during layer existence check.
Blob digests are now checked in the target repository from newest to
latest. If the blob exists and the metadata entry does not, it will be
created. If the blob is not found, the metadata entry will be removed.
Signed-off-by: Michal Minář <miminar@redhat.com>
Upstream-commit: 81f7b1f1e50252e9fdd52111f0899d59f19ecb87
Component: engine
Don't fallback back immediately to blob upload if the cross-repo mount
fails and layer upload is initiated by registry.
Instead cancel the upload and re-try cross-repo mount from different
source repository before doing full re-upload.
Signed-off-by: Michal Minář <miminar@redhat.com>
Upstream-commit: c6dd51c32cfccc06e77b4f7cb2358f788753df72
Component: engine
to avoid unnecessary blob re-uploads.
Cross repository mount from particular repo will most probably fail if
the user pushing to the registry is not the same as the one who pulled
or pushed to the source repo.
This PR attempts first to cross-repo mount from the source repositories
associated with the pusher's auth config. Then it falls back to other
repositories sorted from the most similar to the target repo to the
least.
It also prevents metadata deletion in cases where cross-repo mount fails
and the auth config hashes differ.
Signed-off-by: Michal Minář <miminar@redhat.com>
Upstream-commit: 0928f3f2e3eda75a295b651d27f9dd992fd951a4
Component: engine
This fixes the hard coded restriction for non-linux platforms to v2 registries. Previously, the check was above the flag parsing, which would overwrite the hard coded value and prevent correct operation. This change also removes the related daemon flag from Windows to avoid confusion, as it has no meaning when the value is going to always be hard coded to true.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Upstream-commit: adee28458c23581ac9afb163b7cce8c6bb1d2dee
Component: engine
Always attempt to add digest even when tag already exists.
Ensure digest does not currently exist.
When image id is mismatched, output an error log.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: 33984f256b1a281b1130ac7e8edb7bc311750ccf
Component: engine
Layer uploads are deduplicated by a "key" made up of the layer DiffID
and the repository name. The repository name being used to form this key
was a remote version of the name that didn't include the name of the
registry. Consequently, pushes of the same layer in a repository with
the same remote name to different registries would wrongly be
deduplicated.
Correct the key by using the full name of the repository, which includes
the registry hostname as well as the image's name.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 1333ef3ca381976438d4ae10f6b0e9be21e1a9ba
Component: engine
Replace use of foreign sources with descriptors and describable
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Upstream-commit: 2c60430a3d1431e0879aa1c66ca23143de987b35
Component: engine
This is used to support downloading Windows base images from Microsoft
servers.
Signed-off-by: John Starks <jostarks@microsoft.com>
Upstream-commit: 05bd04350b8348b3c3bbe3156420257313e4e804
Component: engine
@nwt noticed that the media type specified in the config section of a
schema2 manifest is application/octet-stream, instead of the correct
value application/vnd.docker.container.image.v1+json.
This brings in https://github.com/docker/distribution/pull/1622 to fix
this.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: c18d03a7783bb78b7568bf3c23644888995e9a5d
Component: engine
Concurrent uploads which share layers worked correctly as of #18353,
but unfortunately #18785 caused a regression. This PR removed the logic
that shares digests between different push sessions. This overlooked the
case where one session was waiting for another session to upload a
layer.
This commit adds back the ability to propagate this digest information,
using the distribution.Descriptor type because this is what is received
from stats and uploads, and also what is ultimately needed for building
the manifest.
Surprisingly, there was no test covering this case. This commit adds
one. It fails without the fix.
See recent comments on #9132.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 5c99eebe81958a227dfaed1145840374ce50bbbb
Component: engine
Attempt layer mounts from up to 3 source repositories, possibly
falling back to a standard blob upload for cross repository pushes.
Addresses compatiblity issues with token servers which do not grant
multiple repository scopes, resulting in an authentication failure for
layer mounts, which would otherwise cause the push to terminate with an
error.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Upstream-commit: 1d3480f9ba3525309030497d5c8a3dd5725ed15a
Component: engine
With the --insecure-registry daemon option (or talking to a registry on
a local IP), the daemon will first try TLS, and then try plaintext if
something goes wrong with the push or pull. It doesn't make sense to try
plaintext if a HTTP request went through while using TLS. This commit
changes the logic to keep track of host/port combinations where a TLS
attempt managed to do at least one HTTP request (whether the response
code indicated success or not). If the host/port responded to a HTTP
using TLS, we won't try to make plaintext HTTP requests to it.
This will result in better error messages, which sometimes ended up
showing the result of the plaintext attempt, like this:
Error response from daemon: Get
http://myregistrydomain.com:5000/v2/: malformed HTTP response
"\x15\x03\x01\x00\x02\x02"
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 5e8af46fda3f4e17e06726237fc6b9ab6957e3ea
Component: engine
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 8f26fe4f59ce515c68440da1443ace4c96e89d4a
Component: engine
`Upload` already closes the reader returned by `compress` and the
progressreader passed into it, before returning. But even so, the
io.Copy inside compress' goroutine needs to attempt a read from the
progressreader to notice that it's closed, and this read has a side
effect of outputting a progress message. If this happens after `Upload`
returns, it can result in a write to a closed channel. Change `compress`
to return a channel that allows the caller to wait for its goroutine to
finish before freeing any resources connected to the reader that was
passed to it.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: e273445dd407df6803d7b80863b644a6cfa2c1f5
Component: engine
Also renames BlobSumService to V2MetadataService, BlobSum to
V2Metadata
Signed-off-by: Brian Bland <brian.bland@docker.com>
Upstream-commit: 63099477189ea14f3122f6aa37fa7c60d33562c7
Component: engine
Tracks source repository information for each blob in the blobsum
service, which is then used to attempt to mount blobs from another
repository when pushing instead of having to re-push blobs to the same
registry.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Upstream-commit: 7289c7218e2101eb94fb90f2cb22e1412d016984
Component: engine
Currently this always uses the schema1 manifest builder. Later, it will
be changed to attempt schema2 first, and fall back when necessary.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: f33fa1b8d3befec31fdf1952ea1190012c812dc7
Component: engine
The trust code used to parse the console output of `docker push` to
extract the digest, tag, and size information and determine what to
sign. This is fragile and might give an attacker control over what gets
signed if the attacker can find a way to influence what gets printed as
part of the push output.
This commit sends the push metadata out-of-band. It introduces an `Aux`
field in JSONMessage that can carry application-specific data alongside
progress updates. Instead of parsing formatted output, the client looks
in this field to get the digest, size, and tag from the push.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 65370be888d940899593a001024f53d6b83b4bb0
Component: engine
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: a57478d65f1f5782cc746c260f9d841a0907ce54
Component: engine
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 572ce802306a4e919802e5b77cbeca94acda7c0a
Component: engine
Currently, the resources associated with the io.Reader returned by
TarStream are only freed when it is read until EOF. This means that
partial uploads or exports (for example, in the case of a full disk or
severed connection) can leak a goroutine and open file. This commit
changes TarStream to return an io.ReadCloser. Resources are freed when
Close is called.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: 21278efaee563b356851a530b08b0537fee095d7
Component: engine
