Fix debian link in quick_deployment.md #4
|
@ -8,9 +8,15 @@ The instructions, configuration files and scripts referred to in this section ca
|
|||
|
||||
Download the latest Debian Buster preview image for RPi3 and flash it to an SD card (card is located at `/dev/mmcblk0` in this case):
|
||||
|
||||
`wget https://people.debian.org/~gwolf/raspberrypi3/20190628/20190628_raspberry-pi-3_buster_PREVIEW.img.xz`
|
||||
`wget https://raspi.debian.net/verified/20200831_raspi_3.img.xz`
|
||||
`xzcat 20190628_raspberry-pi-3_buster_PREVIEW.img.xz | sudo dd of=/dev/mmcblk0 bs=64k oflag=dsync status=progress`
|
||||
|
||||
on mac os, use the following command to flash the sd card:
|
||||
`xzcat 20190628_raspberry-pi-3_buster_PREVIEW.img.xz | sudo dd of=/dev/sdcarddisc`
|
||||
or you can use [Etcher](https://www.balena.io/etcher/).
|
||||
|
||||
note: if the above image link stops working, you can find the complete list of raspberry pi debian images [here](https://raspi.debian.net/tested-images/).
|
||||
|
||||
## Setup
|
||||
|
||||
Quick setup commands to connect to a local WiFi network over the `wlan0` interface (assuming `eth0` connection is not possible):
|
||||
|
@ -18,8 +24,8 @@ Quick setup commands to connect to a local WiFi network over the `wlan0` interfa
|
|||
```bash
|
||||
# username
|
||||
root
|
||||
# password
|
||||
raspberry
|
||||
# password (by default raspberry debian requires no password, so we set the password for root here)
|
||||
passwd
|
||||
# set interface up
|
||||
ip link set wlan0 up
|
||||
# append ssid and password for wifi access point
|
||||
|
@ -66,10 +72,10 @@ The `setup_dev_env.py` script can be executed once your Pi is internet-connected
|
|||
|
||||
_TODO: Add flags to (de)select I2C, RTC and Rust install & config. Flags should also be added which allow the installer to choose between development environment and release environment configuration._
|
||||
|
||||
`apt update`
|
||||
`apt install git python`
|
||||
`git clone https://github.com/peachcloud/peach-config.git`
|
||||
`cd peach-config`
|
||||
`apt update`
|
||||
`apt install git python`
|
||||
`git clone https://github.com/peachcloud/peach-config.git`
|
||||
`cd peach-config`
|
||||
`python scripts/setup_dev_env.py <USER>`
|
||||
|
||||
**IMPORTANT: Please do not forget to set a new password for the root user!**
|
||||
|
|
Loading…
Reference in New Issue