Fix debian link in quick_deployment.md #4
|
@ -8,9 +8,15 @@ The instructions, configuration files and scripts referred to in this section ca
|
||||||
|
|
||||||
Download the latest Debian Buster preview image for RPi3 and flash it to an SD card (card is located at `/dev/mmcblk0` in this case):
|
Download the latest Debian Buster preview image for RPi3 and flash it to an SD card (card is located at `/dev/mmcblk0` in this case):
|
||||||
|
|
||||||
`wget https://people.debian.org/~gwolf/raspberrypi3/20190628/20190628_raspberry-pi-3_buster_PREVIEW.img.xz`
|
`wget https://raspi.debian.net/verified/20200831_raspi_3.img.xz`
|
||||||
`xzcat 20190628_raspberry-pi-3_buster_PREVIEW.img.xz | sudo dd of=/dev/mmcblk0 bs=64k oflag=dsync status=progress`
|
`xzcat 20190628_raspberry-pi-3_buster_PREVIEW.img.xz | sudo dd of=/dev/mmcblk0 bs=64k oflag=dsync status=progress`
|
||||||
|
|
||||||
|
on mac os, use the following command to flash the sd card:
|
||||||
|
`xzcat 20190628_raspberry-pi-3_buster_PREVIEW.img.xz | sudo dd of=/dev/sdcarddisc`
|
||||||
|
or you can use [Etcher](https://www.balena.io/etcher/).
|
||||||
|
|
||||||
|
note: if the above image link stops working, you can find the complete list of raspberry pi debian images [here](https://raspi.debian.net/tested-images/).
|
||||||
|
|
||||||
## Setup
|
## Setup
|
||||||
|
|
||||||
Quick setup commands to connect to a local WiFi network over the `wlan0` interface (assuming `eth0` connection is not possible):
|
Quick setup commands to connect to a local WiFi network over the `wlan0` interface (assuming `eth0` connection is not possible):
|
||||||
|
@ -18,8 +24,8 @@ Quick setup commands to connect to a local WiFi network over the `wlan0` interfa
|
||||||
```bash
|
```bash
|
||||||
# username
|
# username
|
||||||
root
|
root
|
||||||
# password
|
# password (by default raspberry debian requires no password, so we set the password for root here)
|
||||||
raspberry
|
passwd
|
||||||
# set interface up
|
# set interface up
|
||||||
ip link set wlan0 up
|
ip link set wlan0 up
|
||||||
# append ssid and password for wifi access point
|
# append ssid and password for wifi access point
|
||||||
|
|
Loading…
Reference in New Issue