1.0 KiB
1.0 KiB
This is a fork of the vmdb2 script for building a debian image for raspberry pi, which uses vmdb2 to build a disc image for PeachCloud for the Raspberry pi with all configuration and peach microservices pre-installed.
This vmdb2 script runs:
python setup_dev_env.py -i -n peach
,
the python setup script from peach-config.
Installing vmdb2
Run,
sudo apt install -y vmdb2 dosfstools qemu-user-static binfmt-support time kpartx
To Build A New Image
Run,
make raspi_3.img
Theoretically, you could also use this script to build images for other pi versions,
by running the same command with raspi_0w.img
or raspi_2.img
or raspi_3.img
Installing The Image
This image can then be flashed to an SD card using dd or etcher.
Publishing The Image
PeachCloud images are versioned and published for release at http://releases.peachcloud.org/