1.1 KiB
1.1 KiB
Installation From PeachCloud Disc Image
Step 1: Flash The SD Card
Download the latest PeachCloud image from http://releases.peachcloud.org and flash it to an SD card.
Note: Be sure to use the correct device location in the dd command, otherwise you risk wiping another connected USB device. sudo dmesg | tail can be run after plugging in the SD card to determine the correct device location:
wget http://releases.peachcloud.org/peach-imgs/20210225/20210225_peach_raspi3.img
sudo dd 20210225_peach_raspi3.img of=/dev/sdb bs=64k oflag=dsync status=progress
On Mac OS, use the following command to flash the SD card:
xzcat 20200831_raspi_3.img.xz | sudo dd of=/dev/sdcarddisc
Alternatively, use Etcher.
Note: If the above image link stops working, you can find the latest image here.
Your SD card now has a complete PeachCloud installation on it and is ready to use.
Step 2: Connecting To The Internet
Via peach.local
TODO: write this documentation
Via a Screen
TODO: write this documentation
Step 3: Getting Started
TODO: write this documentation