`arm64` needs get more time duration for the test to finish.
`pty.Start()` opens a file, so the caller should close it explicitly,
else the file I/O can result in unexpected data synchronization issue.
All those changes will not affect the test itself.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Upstream-commit: 476d7872efb60b1ef1bc7d9d83952f9dbc8f8798
Component: engine
Changes included:
- libnetwork#2147 Adding logs for ipam state
- libnetwork#2143 Fix race conditions in the overlay network driver
- possibly addresses moby#36743 services do not start: ingress-sbox is already present
- possibly addresses moby#30427 Flaky Test: TestSwarmPublishDuplicatePorts on s390
- possibly addresses moby#36501 Flaky tests: Service "port" tests
- libnetwork#2142 Add wait time into xtables lock warning
- libnetwork#2135 filter xtables lock warnings when firewalld is active
- libnetwork#2140 Switch from x/net/context to context
- libnetwork#2134 Adding a recovery mechanism for a split gossip cluster
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 158ab95c17bed9e849e0d935899b75018cdf61a4
Component: engine
In case aufs driver is not supported because supportsAufs() said so,
it is not possible to get a real reason from the logs.
To fix, log the error returned.
Note we're not using WithError here as the error message itself is the
sole message we want to print (i.e. there's nothing to add to it).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: 91f85d1c784f3dc9d892b2af2f51d6b6f3b0be69
Component: engine
Simplify the code by using a single logger instance.
While at it, use WithError in Umount.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: c6e2af54256211b8ac757e9b25caa6fb6c9b3c6e
Component: engine
The `deleteAllImages()` cleanup step in the integration suite was printing a
message for each image that was removed.
These messages were not very informative (given that `removeImage()` prints an
error if image removal failed), and made the test output harder to read
(more difficult to see error-conditions when scanning the output).
This patch removes the messages to make the output slightly less noisy.
Before this patch applied:
--- PASS: TestBuildMultiStageOnBuild (7.15s)
main_test.go:32: Removing image sha256:9db3ddbaaadd52804d8a417081f68db41fd4b8f80c85c1b4c4aee2d9b584c074
main_test.go:32: Removing image sha256:7eeb04d90b5e62a99ac6a5b2c10b9ba54b89b176fe2783e41461581c482852b3
main_test.go:32: Removing image sha256:adf42475eefff99b4a611c1a5d8353c4d0a011a7f7b9dc59a75d951cd54fa77f
main_test.go:32: Removing image sha256:c547a770806e0445f5dfc255683ced771a23be6157ba8d0617bb9ab55dcee6d1
main_test.go:32: Removing image sha256:b79659c3e6d34faf2a075f1df1ea2c805833982f112666b25a466177b5d1352d
main_test.go:32: Removing image sha256:29430078cdc927c19c87416cd1fb1ec386f167c5e201ee5dfb1644dcf268a3c2
=== RUN TestBuildUncleanTarFilenames
--- PASS: TestBuildUncleanTarFilenames (2.47s)
main_test.go:32: Removing image sha256:0a6418fb221dc2f25085a1a7e507e01c4a3938cc5c65f1cb85a8c0fb09d6814f
main_test.go:32: Removing image sha256:3d6e4bd0cce01ce5823b40dcb717cd16b3b4b769ff73dd86fa448aac49aa6d7c
main_test.go:32: Removing image sha256:98e3f335e874612668335b3a5f125a1e5cbd0f6c79a7c3f719529b69d0abf2a5
main_test.go:32: Removing image sha256:08919f344b382fd1447da7f3e8ffd2a7125f5f7d191ed7d33242736dbe3c59cf
main_test.go:32: Removing image sha256:d144b3c13838e841ec319a17e1046471d726bb2aa3211e167a6a53f766a2dcdc
main_test.go:32: Removing image sha256:7c768ec742d628020f50c99dc5af32400b78534ca9fc4c01a9f00ec0ab19193a
main_test.go:32: Removing image sha256:4c26c71d142045fbf3448aa1f6363d5a7a803cb438a78a4b20b7c847df03d50a
main_test.go:32: Removing image sha256:08dcd63c964f2dbb17ff2665b6b86993fb14c0d3e169da187ac48f078a560d25
main_test.go:32: Removing image sha256:c1743fab233f36f2d7f83cb13f8c10ff06bdbda8f8a218d25a3796d1bc2f9e84
=== RUN TestBuildMultiStageLayerLeak
--- PASS: TestBuildMultiStageLayerLeak (5.59s)
main_test.go:32: Removing image sha256:5e9974558276c34d7c9aab3fad408d433047b7b15bdae43ab5048adc58a15431
main_test.go:32: Removing image sha256:ac3c613c8c48794237c1e46ac0657ebbb1132910a240086bb2e9df9770fdc017
main_test.go:32: Removing image sha256:a936df268131ad427f7b4b66ce3dbb1e41866d7269a4d383cebcb1c5930d3346
main_test.go:32: Removing image sha256:5e613ea0ce7dbc908b0315c49585ae43ad6c34158e9e0b59a3dc93b00ef0ea41
main_test.go:32: Removing image sha256:e676f4ec41a42823b6d91e05e3290d3827f9175dea6fba5d8b769aa13aa7e082
main_test.go:32: Removing image sha256:93c8daab2703126b23d957d4d6b04f07949356f1cd95d4f8fdbededf4ab5c21e
With this patch applied:
=== RUN TestBuildMultiStageOnBuild
--- PASS: TestBuildMultiStageOnBuild (6.74s)
=== RUN TestBuildUncleanTarFilenames
--- PASS: TestBuildUncleanTarFilenames (2.49s)
=== RUN TestBuildMultiStageLayerLeak
--- PASS: TestBuildMultiStageLayerLeak (5.14s)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 5afce21e2efe572be3a256b748bf269afdd645a5
Component: engine
This hasn't been the way to release Docker for the past year so let's
just remove them altogether
Signed-off-by: Eli Uriegas <eli.uriegas@docker.com>
Upstream-commit: 80bc8b4766cc808186af91930152d78afb22aef8
Component: engine
ext4 support d_type by default, but filetype feature is a tunable so
there is still a chance to disable it for some reasons. In this case,
print additional message to explicitly tell how to support d_type.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Upstream-commit: 8a21b128d4deb874c05eb81ebbc1265175ad69ba
Component: engine
Since we use `NewLabelCommand()` instead of `addNodesForLabelOption()`
to create the 'LABEL' commands from '--label' options, so all the related
functions should be removed.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Upstream-commit: c7b543164daed58fbea36471592438b4e53ab748
Component: engine
Add a new test case `TestBuildLabelWithTargets` to cover the Docker builder
with both `--label` and `--target` options.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Upstream-commit: f7add4262b69294aa8035c4794236193ce4bc68e
Component: engine
This PR is tring to fix issue #36996.
Currently for multi-stage build, if `--target` specified, the `--label` option
will be ignored. The root cause is the last stage build will remove the `LABEL`
command(s) node created from the `--label` option. In order to address this issue,
we can create `LABEL` command(s) and add it/tem to the last stage.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Upstream-commit: 9c238ebd55e4105ad7f7edc04231ea61bb278ae8
Component: engine
This issue has been reported by issue #36877.
The purpose of this test case is for the regression test of #12546,
so we only need to make sure the essential of the testing is still
in the way to check that while not disturbed by some testing noises,
which is exactly what this PR want to do.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Upstream-commit: 96abf9f59ebd350cc9a70034b4d30279e6ae04e4
Component: engine
