Upgrade to the latest OpenTelemetry libraries; this will unblock a lot of
downstream projects in the ecosystem to upgrade, as some of the parts here
were pre-1.0/unstable.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, long lived CLI plugin processes weren't
properly handled
(see: https://github.com/docker/cli/issues/4402)
resulting in plugin processes being left behind
running, after the CLI process exits.
This commit changes the plugin handling code to open
an abstract unix socket before running the plugin and
passing it to the plugin process, and changes the
signal handling on the CLI side to close this socket
which tells the plugin that it should exit.
This implementation makes use of sockets instead of
simply setting PDEATHSIG on the plugin process
so that it will work on both BSDs, assorted UNIXes
and Windows.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
commit 304c100ed2 updated the deprecation
status for these options, but forgot to update the status in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 5d6612798a updated the deprecation
status for devicemapper to "removed", but forgot to update the status
in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#4648
Make it easier to specify IPv6 addresses in the '--add-host' option by
permitting 'host=ip' in addition to 'host:ip', and allowing square
brackets around the address.
For example:
--add-host=my-hostname:127.0.0.1
--add-host=my-hostname:::1
--add-host=my-hostname=::1
--add-host=my-hostname:[::1]
To avoid compatibility problems, the CLI will replace an '=' separator
with ':', and strip brackets, before sending the request to the API.
Signed-off-by: Rob Murray <rob.murray@docker.com>
go1.21.5 (released 2023-12-05) includes security fixes to the go command,
and the net/http and path/filepath packages, as well as bug fixes to the
compiler, the go command, the runtime, and the crypto/rand, net, os, and
syscall packages. See the Go 1.21.5 milestone on our issue tracker for
details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.5+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.5...go1.21.5
from the security mailing:
[security] Go 1.21.5 and Go 1.20.12 are released
Hello gophers,
We have just released Go versions 1.21.5 and 1.20.12, minor point releases.
These minor releases include 3 security fixes following the security policy:
- net/http: limit chunked data overhead
A malicious HTTP sender can use chunk extensions to cause a receiver
reading from a request or response body to read many more bytes from
the network than are in the body.
A malicious HTTP client can further exploit this to cause a server to
automatically read a large amount of data (up to about 1GiB) when a
handler fails to read the entire body of a request.
Chunk extensions are a little-used HTTP feature which permit including
additional metadata in a request or response body sent using the chunked
encoding. The net/http chunked encoding reader discards this metadata.
A sender can exploit this by inserting a large metadata segment with
each byte transferred. The chunk reader now produces an error if the
ratio of real body to encoded bytes grows too small.
Thanks to Bartek Nowotarski for reporting this issue.
This is CVE-2023-39326 and Go issue https://go.dev/issue/64433.
- cmd/go: go get may unexpectedly fallback to insecure git
Using go get to fetch a module with the ".git" suffix may unexpectedly
fallback to the insecure "git://" protocol if the module is unavailable
via the secure "https://" and "git+ssh://" protocols, even if GOINSECURE
is not set for said module. This only affects users who are not using
the module proxy and are fetching modules directly (i.e. GOPROXY=off).
Thanks to David Leadbeater for reporting this issue.
This is CVE-2023-45285 and Go issue https://go.dev/issue/63845.
- path/filepath: retain trailing \ when cleaning paths like \\?\c:\
Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the
volume name in Windows paths starting with \\?\, resulting in
filepath.Clean(\\?\c:\) returning \\?\c: rather than \\?\c:\ (among
other effects). The previous behavior has been restored.
This is an update to CVE-2023-45283 and Go issue https://go.dev/issue/64028.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverts "update to go1.21.4" due to regressions / breaking changes."
This reverts commit 4cf1c50ad1.
This re-applies commit 6472dabe4c.
----
update to go1.21.4
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath package, as well as bug fixes to the linker, the runtime, the compiler, and the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"By default" implies that this is something which could be
disabled for an individual `docker exec` call. This doesn't seem
to be the case, so removing the "by default" part would make
these docs clearer to me.
Signed-off-by: Per Lundberg <per.lundberg@hibox.tv>
This also moves `musl-dev` to the alpine-base stage, due to changes in
Alpine 3.18 causing gotestsum build to fail because stdlib.h was missing;
#17 5.065 # runtime/cgo
#17 5.065 In file included from _cgo_export.c:3:
#17 5.065 /usr/include/fortify/stdlib.h:23:15: fatal error: stdlib.h: No such file or directory
#17 5.065 23 | #include_next <stdlib.h>
#17 5.065 | ^~~~~~~~~~
alpine 3.17:
/ # find / | grep stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
alpine 3.18
/ # find / | grep stdlib.h
/usr/lib/llvm16/lib/clang/16/include/__clang_hip_stdlib.h
/usr/include/fortify/stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- updates fc6976db45
- updates 74bace156c
Commit fc6976db45 introduced support for the
`bind-recursive` option on `--mount`, and deprecated the `bind-nonrecursive`
option. Unlike `bind-nonrecursive` boolean, the `bind-recursive` option
accepts a string value with multiple options.
For convenience, the `bind-recursive` option also was made to accept boolean
values (true/false, 1/0). However, as the option works as the _reverse_ of
`bind-nonrecursive` (`bind-nonrecursive=true` === `bind-recursive=false`),
the new option won't be a "drop-in" replacement, and having more options
to choose from may only be adding more complexity / cognitive overload.
This patch removes support for boolean values; if we see a need to add
support for boolean values in future, it would be trivial to add back this
functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The linter is correct; given that these functions do not allow for an error
to be returned, we panic. Alternatively, we could return the error string
as output, or add a `//nolint:errchkjson` comment.
templates/templates.go:17:3: Error return value of `(*encoding/json.Encoder).Encode` is not checked: unsafe type `interface{}` found (errchkjson)
enc.Encode(v)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
fix some nolintlint false positives
For some reason, nolintlint doesn't consider these used, but they seem to be
legitimate cases where deprecated fields are used.
templates/templates.go:27:29: directive `//nolint:staticcheck // strings.Title is deprecated, but we only use it for ASCII, so replacing with golang.org/x/text is out of scope` is unused for linter "staticcheck" (nolintlint)
"title": strings.Title, //nolint:staticcheck // strings.Title is deprecated, but we only use it for ASCII, so replacing with golang.org/x/text is out of scope
^
cli/command/formatter/image_test.go:75:31: directive `//nolint:staticcheck // ignore SA1019: field is deprecated, but still set on API < v1.44.` is unused for linter "staticcheck" (nolintlint)
call: ctx.VirtualSize, //nolint:staticcheck // ignore SA1019: field is deprecated, but still set on API < v1.44.
^
cli/command/registry/formatter_search.go💯39: directive `//nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).` is unused for linter "staticcheck" (nolintlint)
return c.formatBool(c.s.IsAutomated) //nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).
^
cli/command/registry/formatter_search_test.go:50:55: directive `//nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).` is unused for linter "staticcheck" (nolintlint)
s: registrytypes.SearchResult{IsAutomated: true}, //nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).
^
cli/command/registry/formatter_search_test.go:53:31: directive `//nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).` is unused for linter "staticcheck" (nolintlint)
call: ctx.IsAutomated, //nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).
^
cli/command/registry/formatter_search_test.go:59:27: directive `//nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).` is unused for linter "staticcheck" (nolintlint)
call: ctx.IsAutomated, //nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).
^
cli/command/registry/formatter_search_test.go:202:84: directive `//nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).` is unused for linter "staticcheck" (nolintlint)
{Name: "result2", Description: "Not official", StarCount: 5, IsAutomated: true}, //nolint:staticcheck // ignore SA1019 (IsAutomated is deprecated).
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/types/types.go:568:17: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
return []byte(fmt.Sprintf("%v", e.External)), nil
^
cli/command/formatter/buildcache.go:174:9: fmt.Sprintf can be replaced with faster strconv.Itoa (perfsprint)
return fmt.Sprintf("%d", c.v.UsageCount)
^
cli/command/formatter/buildcache.go:178:9: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
return fmt.Sprintf("%t", c.v.InUse)
^
cli/command/formatter/buildcache.go:182:9: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
return fmt.Sprintf("%t", c.v.Shared)
^
cli/command/formatter/image.go:259:9: fmt.Sprintf can be replaced with faster strconv.FormatInt (perfsprint)
return fmt.Sprintf("%d", c.i.Containers)
^
cli/command/formatter/tabwriter/tabwriter_test.go:698:9: fmt.Sprintf can be replaced with faster strconv.Itoa (perfsprint)
b.Run(fmt.Sprintf("%d", x), func(b *testing.B) {
^
cli/command/formatter/tabwriter/tabwriter_test.go:720:9: fmt.Sprintf can be replaced with faster strconv.Itoa (perfsprint)
b.Run(fmt.Sprintf("%d", h), func(b *testing.B) {
^
cli/command/image/prune.go:62:31: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
pruneFilters.Add("dangling", fmt.Sprintf("%v", !options.all))
^
cli/command/network/formatter.go:92:9: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
return fmt.Sprintf("%v", c.n.EnableIPv6)
^
cli/command/network/formatter.go:96:9: fmt.Sprintf can be replaced with faster strconv.FormatBool (perfsprint)
return fmt.Sprintf("%v", c.n.Internal)
^
cli/command/service/formatter.go:745:9: fmt.Sprintf can be replaced with faster strconv.FormatUint (perfsprint)
pub = fmt.Sprintf("%d", pr.pStart)
^
cli/command/service/formatter.go:750:9: fmt.Sprintf can be replaced with faster strconv.FormatUint (perfsprint)
tgt = fmt.Sprintf("%d", pr.tStart)
^
cli/command/service/opts.go:49:10: fmt.Sprintf can be replaced with faster strconv.FormatUint (perfsprint)
return fmt.Sprintf("%v", *i.value)
^
cli/compose/loader/loader.go:720:36: fmt.Sprint can be replaced with faster strconv.Itoa (perfsprint)
v, err := toServicePortConfigs(fmt.Sprint(value))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/idresolver/idresolver.go:33:4: error is not nil (line 31) but it returns nil (nilerr)
return id, nil
^
cli/command/idresolver/idresolver.go:45:4: error is not nil (line 43) but it returns nil (nilerr)
return id, nil
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/utils.go:190:35: param new has same name as predeclared identifier (predeclared)
func StringSliceReplaceAt(s, old, new []string, requireIndex int) ([]string, bool) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/system/info.go:470:1: deprecatedComment: use `Deprecated: ` (note the casing) instead of `DEPRECATED: ` (gocritic)
// DEPRECATED: warnings are now generated by the daemon, and returned in
^
cli/command/system/info.go:492:1: deprecatedComment: use `Deprecated: ` (note the casing) instead of `DEPRECATED: ` (gocritic)
// DEPRECATED: warnings are now generated by the daemon, and returned in
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/trust/inspect.go:74:33: appendAssign: append result not assigned to the same slice (gocritic)
signatureRows[idx].Signers = append(sig.Signers, releasedRoleName)
^
cli/command/task/print.go:92:7: appendAssign: append result not assigned to the same slice (gocritic)
t := append(tasks[:0:0], tasks...)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This option was created Moby [6d59a566759da5729d7eb89a8e1888fc612f03cf], and
used for the daemon config [353b7c8ec77b30fa83dac5ec0778193f6de8b437]. It was
migrated from the Moby repository in f34ca0a354,
but was never used by the CLI, and there are no external consumers.
If we would need an IP-address option, spf13/pflags now provides those, so
there's no need to implement this ourselves.
[6d59a566759da5729d7eb89a8e1888fc612f03cf]: 6d59a56675
[353b7c8ec77b30fa83dac5ec0778193f6de8b437]: 353b7c8ec7
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- document accepted values
- add test-coverage for the function's behavior (including whitespace handling),
and use sub-tests.
- improve error-message to use uppercase for "IP", and to use a common prefix.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This will return the ServerAddress property when using the NativeStore.
This happens when you use docker credential helpers, not the credential
store.
The reason this fix is needed is because it needs to be propagated
properly down towards `moby/moby` project in the following logic:
```golang
func authorizationCredsFromAuthConfig(authConfig registrytypes.AuthConfig) docker.AuthorizerOpt {
cfgHost := registry.ConvertToHostname(authConfig.ServerAddress)
if cfgHost == "" || cfgHost == registry.IndexHostname {
cfgHost = registry.DefaultRegistryHost
}
return docker.WithAuthCreds(func(host string) (string, string, error) {
if cfgHost != host {
logrus.WithFields(logrus.Fields{
"host": host,
"cfgHost": cfgHost,
}).Warn("Host doesn't match")
return "", "", nil
}
if authConfig.IdentityToken != "" {
return "", authConfig.IdentityToken, nil
}
return authConfig.Username, authConfig.Password, nil
})
}
```
This logic resides in the following file :
`daemon/containerd/resolver.go` .
In the case when using the containerd storage feature when setting the
`cfgHost` variable from the `authConfig.ServerAddress` it will always be
empty. Since it will never be returned from the NativeStore currently.
Therefore Docker Hub images will work fine, but anything else will fail
since the `cfgHost` will always be the `registry.DefaultRegistryHost`.
Signed-off-by: Eric Bode <eric.bode@foundries.io>
Unfortunately, the go1.21.4 security update exposed some regressions / breaking
changes in moby (docker engine) and containerd. These issues are looked into,
but in the meantime we should revert this patch.
This temporarily reintroduces CVE-2023-45284 and CVE-2023-45283.
This reverts commit 6472dabe4c.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath
package, as well as bug fixes to the linker, the runtime, the compiler, and
the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone
on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function only needed the ContainerAPIClient, and not the whole CLI. This
patch refactors it to use the shallower interface.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a follow-up of https://github.com/docker/cli/pull/4419. That PR
leveraged the fact that EndpointSettings.MacAddress is already
available, although not used by the CreateNetwork endpoint.
TestParseWithMacAddress was testing whether the container-wide
MacAddress field is set, and we still need to test that to ensure
backward compatibility. But we now also need to test whether the
endpoint-specific MacAddress is set.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Next commit will need this change to test whether the endpoint-specific
MacAddress is correctly set.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
server: prohibit more than MaxConcurrentStreams handlers from running at once
(CVE-2023-44487).
In addition to this change, applications should ensure they do not leave running
tasks behind related to the RPC before returning from method handlers, or should
enforce appropriate limits on any such work.
- https://github.com/grpc/grpc-go/compare/v1.56.2...v1.56.3
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Please the linters in preparation of updating golangci-lint;
- remove dot-imports
- add some checks for unhandled errors
- replace some fixed-value variables for consts
cli/command/image/build/context.go:238:17: G107: Potential HTTP request made with variable url (gosec)
if resp, err = http.Get(url); err != nil {
^
cli/command/idresolver/idresolver_test.go:7:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/registry_test.go:7:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/cli/command" // Prevents a circular import with "github.com/docker/cli/internal/test"
^
cli/command/task/print_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/swarm/update_test.go:10:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/swarm/unlock_key_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/swarm/join_token_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/node/list_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/node/promote_test.go:8:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/node/demote_test.go:8:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package functions
^
cli/command/node/ps_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/node/update_test.go:8:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/node/inspect_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package functions
^
cli/command/secret/ls_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/secret/inspect_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/volume/inspect_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/volume/list_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/config/inspect_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/config/ls_test.go:11:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/network/list_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders"
^
cli/command/container/list_test.go:10:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/service/list_test.go:12:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders"
^
cli/command/service/client_test.go:6:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/stack/list_test.go:8:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/stack/services_test.go:9:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
cli/command/stack/ps_test.go:10:2: dot-imports: should not use dot imports (revive)
. "github.com/docker/cli/internal/test/builders" // Import builders to get the builder function as package function
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker swarm update` copmmand does not have a `--quiet` flag, but this
test was trying to set it.
docker swarm update --help
Usage: docker swarm update [OPTIONS]
Update the swarm
Options:
--autolock Change manager autolocking setting (true|false)
--cert-expiry duration Validity period for node certificates (ns|us|ms|s|m|h) (default 2160h0m0s)
--dispatcher-heartbeat duration Dispatcher heartbeat period (ns|us|ms|s|m|h) (default 5s)
--external-ca external-ca Specifications of one or more certificate signing endpoints
--max-snapshots uint Number of additional Raft snapshots to retain
--snapshot-interval uint Number of log entries between Raft snapshots (default 10000)
--task-history-limit int Task history retention limit (default 5)
The test didn't catch this issue, because errors when setting the flag were
not handled, so also adding error-handling;
=== Failed
=== FAIL: cli/command/swarm TestSwarmUpdate (0.00s)
update_test.go:177: assertion failed: error is not nil: no such flag -quiet
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Paths in the advanced / compose-file format are not converted
to be platform-specific, so for these tests, it should not be
needed to convert the paths to be Windows-paths.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
use the golden utility instead of self-crafting expected output,
this allows automaticaly updating the expected output.
This change does break this specific test on Windows due to platform-
specific paths. Other tests already have this issue on Windows, so
skipping the test for now.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removed broken link in #937
- How I did it
Removed first section of CONTRIBUTING.md
- How to verify it
Check CONTRIBUTING.md
- Description for the changelog
Removed broken link in contributing to Docker documentation.
A picture of a cute animal (not mandatory but encouraged)
Closes#937
Signed-off-by: achneerov <achneerov@gmail.com>
full diff: https://github.com/golang/net/compare/v0.10.0...v0.17.0
This fixes the same CVE as go1.21.3 and go1.20.10;
- net/http: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and
immediately resets them can cause excessive server resource consumption.
While the total number of requests is bounded to the
http2.Server.MaxConcurrentStreams setting, resetting an in-progress
request allows the attacker to create a new request while the existing
one is still executing.
HTTP/2 servers now bound the number of simultaneously executing
handler goroutines to the stream concurrency limit. New requests
arriving when at the limit (which can only happen after the client
has reset an existing, in-flight request) will be queued until a
handler exits. If the request queue grows too large, the server
will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 v0.17.0,
for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests)
per HTTP/2 connection. This value may be adjusted using the
golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams
setting and the ConfigureServer function.
This is CVE-2023-39325 and Go issue https://go.dev/issue/63417.
This is also tracked by CVE-2023-44487.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Fix storageDriver gcs not registered in binaries
- reference: replace uses of deprecated function SplitHostname
- Dont parse errors as JSON unless Content-Type is set to JSON
- update to go1.20.8
- Set Content-Type header in registry client ReadFrom
- deprecate reference package, migrate to github.com/distribution/reference
- digestset: deprecate package in favor of go-digest/digestset
- Do not close HTTP request body in HTTP handler
full diff: https://github.com/distribution/distribution/compare/v2.8.2...v2.8.3
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.3 (released 2023-10-10) includes a security fix to the net/http package.
See the Go 1.21.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.2...go1.21.3
From the security mailing:
[security] Go 1.21.3 and Go 1.20.10 are released
Hello gophers,
We have just released Go versions 1.21.3 and 1.20.10, minor point releases.
These minor releases include 1 security fixes following the security policy:
- net/http: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and
immediately resets them can cause excessive server resource consumption.
While the total number of requests is bounded to the
http2.Server.MaxConcurrentStreams setting, resetting an in-progress
request allows the attacker to create a new request while the existing
one is still executing.
HTTP/2 servers now bound the number of simultaneously executing
handler goroutines to the stream concurrency limit. New requests
arriving when at the limit (which can only happen after the client
has reset an existing, in-flight request) will be queued until a
handler exits. If the request queue grows too large, the server
will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 v0.17.0,
for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests)
per HTTP/2 connection. This value may be adjusted using the
golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams
setting and the ConfigureServer function.
This is CVE-2023-39325 and Go issue https://go.dev/issue/63417.
This is also tracked by CVE-2023-44487.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.2 (released 2023-10-05) includes one security fixes to the cmd/go package,
as well as bug fixes to the compiler, the go command, the linker, the runtime,
and the runtime/metrics package. See the Go 1.21.2 milestone on our issue
tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.2+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.1...go1.21.2
From the security mailing:
[security] Go 1.21.2 and Go 1.20.9 are released
Hello gophers,
We have just released Go versions 1.21.2 and 1.20.9, minor point releases.
These minor releases include 1 security fixes following the security policy:
- cmd/go: line directives allows arbitrary execution during build
"//line" directives can be used to bypass the restrictions on "//go:cgo_"
directives, allowing blocked linker and compiler flags to be passed during
compliation. This can result in unexpected execution of arbitrary code when
running "go build". The line directive requires the absolute path of the file in
which the directive lives, which makes exploting this issue significantly more
complex.
This is CVE-2023-39323 and Go issue https://go.dev/issue/63211.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
See `opts/mount_test.go:TestMountOptSetBindRecursive()` for the behavior.
Documentation will be added separately after reaching consensus on the
design.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
On Go 1.18 since a5ebe2282a, we get:
# github.com/docker/docker-credential-helpers/client
vendor/github.com/docker/docker-credential-helpers/client/command.go:34:39: programCmd.Environ undefined (type *exec.Cmd has no field or method Environ)
note: module requires Go 1.19
# github.com/docker/cli/cli/connhelper/commandconn
cli/connhelper/commandconn/commandconn.go:71:22: undefined: atomic.Bool
cli/connhelper/commandconn/commandconn.go:76:22: undefined: atomic.Bool
cli/connhelper/commandconn/commandconn.go:77:22: undefined: atomic.Bool
cli/connhelper/commandconn/commandconn.go:78:22: undefined: atomic.Bool
These go away when building against 1.19+.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
This copies the github.com/moby/buildkit/util/appcontext
package as an internal package. The appcontext package from
BuildKit was the only remaining dependency on BuildKit, and
while we may need some of its functionality, the implementation
is not correct for how it's used in docker/cli (so would need
a rewrite).
Moving a copy of the code into the docker/cli (but as internal
package to prevent others from depending on it) is a first step
in that process, and removes the circular dependency between
BuildKit and the CLi.
We are only using these:
tree vendor/github.com/moby/buildkit
vendor/github.com/moby/buildkit
├── AUTHORS
├── LICENSE
└── util
└── appcontext
├── appcontext.go
├── appcontext_unix.go
├── appcontext_windows.go
└── register.go
3 directories, 6 files
Before this:
go mod graph | grep ' github.com/docker/cli'
github.com/moby/buildkit@v0.11.6 github.com/docker/cli@v23.0.0-rc.1+incompatible
After this:
go mod graph | grep ' github.com/docker/cli'
# (nothing)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This may find its way into the official images, but until it does, let's
make sure we don't get unexpected updates of go.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's not needed to build these binaries. The Dockerfile.dev image already
has CGO_ENABLED=0 as default in the golang image, so does not need updates.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We were depending on alpine's package repository to install compose,
but for debian we used compose's GitHub releases. Depending on distro
packages means that we don't know when updates will happen, and versions
may diverge because of that; for example, alpine 3.18 updated to compose
v2;
On alpine 3.17:
make -f docker.Makefile build-e2e-image
docker run --rm docker-cli-e2e docker-compose --version
docker-compose version 1.29.2, build unknown
On alpine 3.18:
make -f docker.Makefile build-e2e-image
docker run --rm docker-cli-e2e docker-compose --version
Docker Compose version v2.17.3
This caused our e2e script to fail, as it made assumptions about the name
format created by compose, which changed from underscores to hyphens in v2;
Container cliendtoendsuite-engine-1 Running
Error: No such object: cliendtoendsuite_engine_1
This patch:
- updates the Dockerfile to install compose from the compose-bin image
- adjusts the e2e script for the new naming scheme format
- removes the version field from the compose-files used in e2e, as they
are no longer used by compose.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.8 (released 2023-09-06) includes two security fixes to the html/template
package, as well as bug fixes to the compiler, the go command, the runtime,
and the crypto/tls, go/types, net/http, and path/filepath packages. See the
Go 1.20.8 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.8+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.7...go1.20.8
From the security mailing:
[security] Go 1.21.1 and Go 1.20.8 are released
Hello gophers,
We have just released Go versions 1.21.1 and 1.20.8, minor point releases.
These minor releases include 4 security fixes following the security policy:
- cmd/go: go.mod toolchain directive allows arbitrary execution
The go.mod toolchain directive, introduced in Go 1.21, could be leveraged to
execute scripts and binaries relative to the root of the module when the "go"
command was executed within the module. This applies to modules downloaded using
the "go" command from the module proxy, as well as modules downloaded directly
using VCS software.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-39320 and Go issue https://go.dev/issue/62198.
- html/template: improper handling of HTML-like comments within script contexts
The html/template package did not properly handle HMTL-like "<!--" and "-->"
comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may
cause the template parser to improperly interpret the contents of <script>
contexts, causing actions to be improperly escaped. This could be leveraged to
perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39318 and Go issue https://go.dev/issue/62196.
- html/template: improper handling of special tags within script contexts
The html/template package did not apply the proper rules for handling occurrences
of "<script", "<!--", and "</script" within JS literals in <script> contexts.
This may cause the template parser to improperly consider script contexts to be
terminated early, causing actions to be improperly escaped. This could be
leveraged to perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39319 and Go issue https://go.dev/issue/62197.
- crypto/tls: panic when processing post-handshake message on QUIC connections
Processing an incomplete post-handshake message for a QUIC connection caused a panic.
Thanks to Marten Seemann for reporting this issue.
This is CVE-2023-39321 and CVE-2023-39322 and Go issue https://go.dev/issue/62266.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The new advanced --network syntax introduced in docker/cli#1767 is
lacking support for `link-local-ip` and `mac-address` fields. This
commit adds both.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Following flags are silently ignored when they're passed with no
`--network` specified (ie. when the default network is used):
- `--network-alias`
- `--ip`
- `--ip6`
- `--link-local-ip`
This is not really an issue right now since the first 3 parameters are
not allowed on the default bridge network. However, with
[moby/moby#45905][1], the container-wide MacAddress parameter will be
deprecated and dismissed. Because of that, with [docker/cli#4419][2],
it's currently not possible to use the `--mac-address` flag with no
default network specified.
Morever, `docker network connect --link-local-ip ...` works properly, so
it should also work on `docker container create`. This also lay the
ground for making the default bridge network just a "normal" network.
Since the 3 parameters in the list above aren't ignored anymore, if
users provide them, moby's ContainerStart endpoint will complain about
those. To provide better UX, [moby/moby#46183][3] make sure these
invalid parameters lead to a proper error message on `docker container
create` / `docker run`.
[1]: https://github.com/moby/moby/pull/45905
[2]: https://github.com/docker/cli/pull/4419
[3]: https://github.com/moby/moby/pull/46183
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The latin phrase "vice versa" can be pronounced "vice-a-versa", but should not be rendered as such.
Signed-off-by: briantracy <brian.tracy33@gmail.com>
Remove some redundant error-checks or combine them. Also made a small
optimisation when initialising a slice.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also make it slightly more clearer we're returning a default (empty)
policy if the input is empty.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was skipped if the host was not using UTC timezone, because the output
of timestamps would be different, causing the test to fail.
This patch overrides the TZ env-var to make the test use UTC, so that we don't
have to skip the test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes issue #3889 by only loading docker plugins path when needed: if it is fast enough than it shouldn't be a problem to do this on demand; OTOH if it is slow then we shouldn't do this during *every* bash session initialization, regardless if docker completion will be needed or not.
Signed-off-by: Oded Arbel <oded@geek.co.il>
The BuildKit dockerignore package was migrated to the patternmatcher
repository / module. This patch updates our uses of the BuildKit package
with its new location.
A small local change was made to keep the format of the existing error message,
because the "ignorefile" package is slightly more agnostic in that respect
and doesn't include ".dockerignore" in the error message.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This attempts to make it clearer that the --cgroup-parent option is only used
for the containers used during build. Instead of mentioning "build container",
I opted for using "RUN instructions" (to match the --network description),
although this may not be ideal (as it assumes the "Dockerfile" front-end, which
of course may not be the case).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When using a personal access token, Docker Hub produces an error if actions
are requested beyond the token's allowed actions. This resulted in errors
when using a PAT with limited permissions to do a "docker manifest inspect".
This patch sets actions to "pull" only by default, and requests "push" action
for requests that need it.
To verify:
- create a PAT with limited access (read-only)
- log in with your username and the PAT as password
Before this patch:
docker manifest inspect ubuntu:latest
Get "https://registry-1.docker.io/v2/library/ubuntu/manifests/latest": unauthorized: access token has insufficient scopes
With this patch applied:
docker manifest inspect ubuntu:latest
{
"schemaVersion": 2,
"mediaType": "application/vnd.oci.image.index.v1+json",
"manifests": [
{
"mediaType": "application/vnd.oci.image.manifest.v1+json",
"size": 424,
"digest": "sha256:56887c5194fddd8db7e36ced1c16b3569d89f74c801dc8a5adbf48236fb34564",
"platform": {
"architecture": "amd64",
"os": "linux"
}
},
{
"mediaType": "application/vnd.oci.image.manifest.v1+json",
"size": 424,
"digest": "sha256:c835a4f2a632bc91a2b494e871549f0dd83f2966c780e66435774e77e048ddf0",
"platform": {
"architecture": "arm",
"os": "linux",
"variant": "v7"
}
}
]
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a similar fix as 006c946389, which
fixed this for detection of commands that were executed. Make sure we don't
call the "/_ping" endpoint if we don't need to.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In previous versions of the Docker API, `system prune --volumes` and `volume prune`
would remove all dangling volumes. With API v1.42, this was changed so that only
anonymous volumes would be removed unless the all filter was specified.
Some of the docs were updated in #4218, however, there were a couple of places
left that didn't make the anonymous vs named volumes distinction clear.
This replaces #4079, which was bitrotted by #4218. See also #4028.
Closes#4079.
Signed-off-by: Ed Morley <501702+edmorley@users.noreply.github.com>
The IsAutomated field is being deprecated by Docker Hub's search API and
will always be "false" in future.
This patch:
- Deprecates the field and the related "is-automated" filter
- Removes the "AUTOMATED" column from the default output of "docker search"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Both these functions took the whole DockerCLI as argument, but only needed
the ConfigFile. ResolveAuthConfig also had an unused context.Context as
argument.
This patch updates both functions to accept a ConfigFile, and removes the
unused context.Context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use consts for fixed values, and rename some for clarity
- remove testAuthErrors map and inline the logic (same as we do for other cases)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- TestSearchContext: don't use un-keyed structs
- TestSearchContext: don't use CompareMultipleValues as it was not needed
- TestSearchContextDescription: don't use un-keyed structs
- TestSearchContextDescription: don't use CompareMultipleValues as it was not needed
- TestSearchContextWrite: don't use un-keyed structs, and include the
code-comments into the test-table as names for the tests to give them
some context.
- TestSearchContextWriteJSON and TestSearchContextWriteJSONField were not
validating the output format, but validating if the JSON output could
be marshalled back to a struct. Let's just role them into TestSearchContextWrite.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Includes a fix for CVE-2023-29409
go1.20.7 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler. See the
Go 1.20.7 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.20.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.20.6...go1.20.7
From the mailing list announcement:
[security] Go 1.20.7 and Go 1.19.12 are released
Hello gophers,
We have just released Go versions 1.20.7 and 1.19.12, minor point releases.
These minor releases include 1 security fixes following the security policy:
- crypto/tls: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server
to expend significant CPU time verifying signatures. Limit this by
restricting the size of RSA keys transmitted during handshakes to <=
8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only
three certificates in circulation with keys larger than this, and all
three appear to be test certificates that are not actively deployed. It
is possible there are larger keys in use in private PKIs, but we target
the web PKI, so causing breakage here in the interests of increasing the
default safety of users of crypto/tls seems reasonable.
Thanks to Mateusz Poliwczak for reporting this issue.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.20.7
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- full diff: https://github.com/containerd/containerd/compare/v1.6.21...v1.6.22
- release notes: https://github.com/containerd/containerd/releases/tag/v1.6.22
---
Notable Updates
- RunC: Update runc binary to v1.1.8
- CRI: Fix `additionalGids`: it should fallback to `imageConfig.User`
when `securityContext.RunAsUser`, `RunAsUsername` are empty
- CRI: Write generated CNI config atomically
- Fix concurrent writes for `UpdateContainerStats`
- Make `checkContainerTimestamps` less strict on Windows
- Port-Forward: Correctly handle known errors
- Resolve `docker.NewResolver` race condition
- SecComp: Always allow `name_to_handle_at`
- Adding support to run hcsshim from local clone
- Pinned image support
- Runtime/V2/RunC: Handle early exits w/o big locks
- CRITool: Move up to CRI-TOOLS v1.27.0
- Fix cpu architecture detection issue on emulated ARM platform
- Task: Don't `close()` io before `cancel()`
- Fix panic when remote differ returns empty result
- Plugins: Notify readiness when registered plugins are ready
- Unwrap io errors in server connection receive error handling
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- go.mod: update dependencies and go version by
- Use Go1.20
- Fix couple of typos
- Added `WithStdout` and `WithStderr` helpers
- Moved `cmdOperators` handling from `RunCmd` to `StartCmd`
- Deprecate `assert.ErrorType`
- Remove outdated Dockerfile
- add godoc links
full diff: https://github.com/gotestyourself/gotest.tools/compare/v3.4.0...v3.5.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Initialize AuthConfigs map if it's nil before returning it.
This fixes fileStore.Store nil dereference panic when adding a new key
to the map.
Signed-off-by: Danial Gharib <danial.mail.gh@gmail.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
It's unused in the CLI itself, and does nothing other than
initializing a new, empty StartOptions struct.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
update the version we use in the dev-container;
- Fix a regression for bake where services in profiles would not be loaded.
- Fix a regression where --cgroup-parent option had no effect during build.
- Fix a regression where valid docker contexts could fail buildx builder name validation.
- Fix an issue where the host-gateway special address could not be used as an argument to --add-host.
- Fix a possible panic when terminal is resized during the build.
release notes: https://github.com/docker/buildx/releases/tag/v0.11.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.6 (released 2023-07-11) includes a security fix to the net/http package,
as well as bug fixes to the compiler, cgo, the cover tool, the go command,
the runtime, and the crypto/ecdsa, go/build, go/printer, net/mail, and text/template
packages. See the Go 1.20.6 milestone on our issue tracker for details.
https://github.com/golang/go/issues?q=milestone%3AGo1.20.6+label%3ACherryPickApproved
Full diff: https://github.com/golang/go/compare/go1.20.5...go1.20.6
These minor releases include 1 security fixes following the security policy:
net/http: insufficient sanitization of Host header
The HTTP/1 client did not fully validate the contents of the Host header.
A maliciously crafted Host header could inject additional headers or entire
requests. The HTTP/1 client now refuses to send requests containing an
invalid Request.Host or Request.URL.Host value.
Thanks to Bartek Nowotarski for reporting this issue.
Includes security fixes for [CVE-2023-29406 ][1] and Go issue https://go.dev/issue/60374
[1]: https://github.com/advisories/GHSA-f8f7-69v5-w4vx
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
no changes in vendored files, but keeping in sync with the docker/docker version
full diff: 36334ed187...ad0f3ae162
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Changes the `Read` and `Write` error handling
logic to return the original error while closing
the connection. We still skip calling `handleEOF`
if already closing the connection.
Fixes the flaky `TestCloseWhileWriting` and
`TestCloseWhileReading` tests.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
The daemon collects this information regardless if "debug" is
enabled. Print the debugging information if either the daemon,
or the client has debug enabled.
We should probably improve this logic and print any of these if
set (but some special rules are needed for file-descriptors, which
may use "-1".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The flag-set that was returned is a pointer to the command's Flags(), which
is in itself passed by reference (as it is modified / set up).
This patch removes the flags return, to prevent assuming it's different than
the command's flags.
While SetupRootCommand is exported, a search showed that it's only used internally,
so changing the signature should not be a problem.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This flag was kept separate from the other flags, because at the time, the
CLI code and Daemon code still used the same codebase, and shared some parts.
This option only applied to the `docker` CLI, and thus was kept separate when
migrating to Cobra in 0452ff5a4d
Now that this code is only used for the CLI (and plugins), we can move this
flag together with the other flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a const to allow documenting the environment variable in code. The location
of this const is a bit "unfortunate", due to CLI and Client-config to be spread
over the cli/config, cli/config/configfile, and docker/docker/client packages
(some options are for the client, others for the CLI), and some reorganizing
may be useful for easier consumption.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 8a30653ed5 introduced a sync.Once
to allow for the config-directory (and home-dir) to be looked up lazily
instead of in an `init()`.
However, the package-level `configDir` variable can be set through two
separate paths; implicitly (through `config.Dir()`), and explicitly,
through `config.SetDir()`. The existing code had no synchronisation for
this, which could lead to a potential race-condition (code requesting
`config.Dir()` and code setting a custom path through `config.SetDir()`).
This patch adds synchronisation by triggering the `sync.Once` as part of
`config.SetDir()` to prevent it being triggered later (overwriting the
value that was set). It also restores the `resetConfigDir()` utility that
was removed in 379122b033, to allow resetting
the `sync.Once` for this test.
In general, we should get rid of this package-level variable, and store
it as a config on the client (passing the option to locations where its
used instead).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
support for kubernetes contexts was deprecated in docker 20.10 through
b639ea8b89, 0793f96394,
and 1d37fb3027, and removed altoghether in
23.0 through 193ede9b12.
This patch removes the remaining stubs for options that were deprecated
and no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
More things to be done after this, to allow passing a custom user-agent,
but let's start with just using this utility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.5 (released 2023-06-06) includes four security fixes to the cmd/go and
runtime packages, as well as bug fixes to the compiler, the go command, the
runtime, and the crypto/rsa, net, and os packages. See the Go 1.20.5 milestone
on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.5+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.4...go1.20.5
These minor releases include 3 security fixes following the security policy:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo. This
may result in unexpected behavior when running a go program which uses cgo.
This may occur when running an untrusted module which contains directories with
newline characters in their names. Modules which are retrieved using the go command,
i.e. via "go get", are not affected (modules retrieved using GOPATH-mode, i.e.
GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the setuid/setgid
bit set. On Unix platforms, if a setuid/setgid binary was executed with standard
I/O file descriptors closed, opening any files could result in unexpected
content being read/written with elevated prilieges. Similarly if a setuid/setgid
program was terminated, either via panic or signal, it could leak the contents
of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo. This may
occur when running "go get" on a malicious module, or when running any other
command which builds untrusted code. This is can by triggered by linker flags,
specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Official Golang images are now only available for 3.18 and 3.17;
3.18 doesn't look to play well with gotestsum, so sticking to
an older version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When passing a Dockerfile through stdin, it's not possible to specify the
name of the Dockerfile (using the `-f` option). When building with BuildKit
enabled, an error is already produced for this case, but the classic builder
silently ignored it.
This patch adds an error for this situation:
echo -e 'FROM busybox' | DOCKER_BUILDKIT=0 docker build -f some.Dockerfile -
DEPRECATED: The legacy builder is deprecated and will be removed in a future release.
BuildKit is currently disabled; enable it by removing the DOCKER_BUILDKIT=0
environment-variable.
unable to prepare context: ambiguous Dockerfile source: both stdin and flag correspond to Dockerfiles
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This error was only used in a single location, so no need to define a
package-level variable for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
All users of this function sorted the results afterwards, so let's
do it as part of the function itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was marked deprecated in 977d3ae046,
which is part of Docker 20.10 and up.
This patch removes the field.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
---
commandconn: fix race on `Close()`
During normal operation, if a `Read()` or `Write()` call results
in an EOF, we call `onEOF()` to handle the terminating command,
and store it's exit value.
However, if a Read/Write call was blocked while `Close()` is called
the in/out pipes are immediately closed which causes an EOF to be
returned. Here, we shouldn't call `onEOF()`, since the reason why
we got an EOF is because we're already terminating the connection.
This also prevents a race between two calls to the commands `Wait()`,
in the `Close()` call and `onEOF()`
---
Add CLI init timeout to SSH connections
---
connhelper: add 30s ssh default dialer timeout
(same as non-ssh dialer)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This code was introduced in 15aa2a663b,
but from those changes, it appears that overwriting the config value was
merely out of convenience, and that struct being used as an intermediate.
While changing the config here should be mostly ephemeral, and not written
back to the config-file, let's be clear on intent, and not mutatte the config
as part of this code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function returned the whole response, but we already handled the
warnings included in the response as part of the function. All consumers
of this function only used the container-ID, so let's simplify and return
just that (it's a non-exported func, so we can change the signature again
if we really need it).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a const for the name of the environment-variable we accept, so
that we can document its purpose in code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the default proxy, to assist with vanity domains mis-behaving, but keep
a fallback for situations where we need to get modules from GitHub directly.
This should hopefully help with the gopkg.in/yaml.v2 domain often going AWOL;
#14 245.9 gopkg.in/yaml.v2@v2.4.0: unrecognized import path "gopkg.in/yaml.v2": reading https://gopkg.in/yaml.v2?go-get=1: 502 Bad Gateway
#14 245.9 server response: Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
curl 'https://gopkg.in/yaml.v2?go-get=1'
Cannot obtain refs from GitHub: cannot talk to GitHub: Get https://github.com/go-yaml/yaml.git/info/refs?service=git-upload-pack: write tcp 10.131.9.188:60820->140.82.121.3:443: write: broken pipe
From the Go documentation; https://go.dev/ref/mod#goproxy-protocol
> List elements may be separated by commas (,) or pipes (|), which determine error
> fallback behavior. When a URL is followed by a comma, the go command falls back
> to later sources only after a 404 (Not Found) or 410 (Gone) response. When a URL
> is followed by a pipe, the go command falls back to later sources after any error,
> including non-HTTP errors such as timeouts. This error handling behavior lets a
> proxy act as a gatekeeper for unknown modules. For example, a proxy could respond
> with error 403 (Forbidden) for modules not on an approved list (see Private proxy
> serving private modules).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the "golang.org/x/sys/execabs" package was introduced to address a security
issue on Windows, and changing the default behavior of os/exec was considered
a breaking change. go1.19 applied the behavior that was previously implemented
in the execabs package;
from the release notes: https://go.dev/doc/go1.19#os-exec-path
> Command and LookPath no longer allow results from a PATH search to be found
> relative to the current directory. This removes a common source of security
> problems but may also break existing programs that depend on using, say,
> exec.Command("prog") to run a binary named prog (or, on Windows, prog.exe)
> in the current directory. See the os/exec package documentation for information
> about how best to update such programs.
>
> On Windows, Command and LookPath now respect the NoDefaultCurrentDirectoryInExePath
> environment variable, making it possible to disable the default implicit search
> of “.” in PATH lookups on Windows systems.
With those changes, we no longer need to use the execabs package, and we can
switch back to os/exec.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit c846428cb6 added proxies to the
example `daemon.json`, based on the implementation that was added in
427c7cc5f8.
However, a follow-up pull request changed the proxy-configuration in`daemon.json`
to nest the configuration in a "proxies" struct, and the documentation was
not updated accordingly; see:
101dafd049
This patch fixes the example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The AuFS and (legacy) overlay storage drivers have been deprecated and
removed, so remove them from the completion scripts.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The AuFS storage driver was deprecated and has been removed, so let's
update the test-fixtures accordingly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit de8b696ed6 removed the patch
releases from the deprecation doc, but when we switched to the
SemVer(ish) format for v23.0, we accidentally added them back.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
None of the client will return the old error-types, so there's no need
to keep the compatibility code. We can consider deprecating this function
in favor of the errdefs equivalent this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `~/.dockercfg` file was replaced by `~/.docker/config.json` in 2015
(github.com/docker/docker/commit/18c9b6c6455f116ae59cde8544413b3d7d294a5e).
Commit b83bc67136 (v23.0.0, but backported to
v20.10) added a warning if no "current" config file was found but a legacy
file was, and if the CLI would fall back to using the deprecated file.
Commit ee218fa89e removed support for the
legacy file, but kept a warning in place if a legacy file was in place,
and now ignored.
This patch removes the warning as well, fully deprecating the legacy
`~/.dockercfg` file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This FIXME was added in 2013 in c72ff318d3
and it's both unclear which "internal golang config parser" is referred to
here. Given that 10 Years have passed, this will unlikely happen, and doesn't
warrant a FIXME here.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was deprecated in b87ed34351,
which is part of the v24.0 release, so we can remove it from master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were deprecated in f08252c10a, which
is part of the v24.0 release, so we can remove these on master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was marked deprecated in 977d3ae046,
which is part of v20.10 and up, but the comment was missing a newline before
the deprecation message, which may be picked up by IDEs, but is not matching
the correct format, so may not be picked up by linters.
This patch fixes the format, to make sure linters pick up that the field is
deprecated.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
defaultCredentialsStore() on Linux does an exec.LookPath() for "pass", but
if a custom credential-store is passed to DetectDefaultStore, the result
of that won't be used.
This patch changes the logic to return early if a custom credential-store
is passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Code in methods of this type also used the Client, and having this receiver
named "c" made it easy to confuse it for referring to Client ("c").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.4 (released 2023-05-02) includes three security fixes to the html/template
package, as well as bug fixes to the compiler, the runtime, and the crypto/subtle,
crypto/tls, net/http, and syscall packages. See the Go 1.20.4 milestone on our
issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.4+label%3ACherryPickApproved
release notes: https://go.dev/doc/devel/release#go1.20.4
full diff: https://github.com/golang/go/compare/go1.20.3...go1.20.4
from the announcement:
> These minor releases include 3 security fixes following the security policy:
>
> - html/template: improper sanitization of CSS values
>
> Angle brackets (`<>`) were not considered dangerous characters when inserted
> into CSS contexts. Templates containing multiple actions separated by a '/'
> character could result in unexpectedly closing the CSS context and allowing
> for injection of unexpected HMTL, if executed with untrusted input.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-24539 and Go issue https://go.dev/issue/59720.
>
> - html/template: improper handling of JavaScript whitespace
>
> Not all valid JavaScript whitespace characters were considered to be
> whitespace. Templates containing whitespace characters outside of the character
> set "\t\n\f\r\u0020\u2028\u2029" in JavaScript contexts that also contain
> actions may not be properly sanitized during execution.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-24540 and Go issue https://go.dev/issue/59721.
>
> - html/template: improper handling of empty HTML attributes
>
> Templates containing actions in unquoted HTML attributes (e.g. "attr={{.}}")
> executed with empty input could result in output that would have unexpected
> results when parsed due to HTML normalization rules. This may allow injection
> of arbitrary attributes into tags.
>
> Thanks to Juho Nurminen of Mattermost for reporting this issue.
>
> This is CVE-2023-29400 and Go issue https://go.dev/issue/59722.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding some utilities to print the output, to keep the linters happier
without having to either suppress errors, or ignore them.
Perhaps we should consider adding utilities for this on the "command.Streams"
outputs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The VirtualSize field is deprecated and the upcoming API version v1.44
will no longer propagate the field. See:
1261fe69a3,
Given that in docker 1.10 and up (API v1.22), the VirtualSize and Size
fields contain the same value, and the "df" endpoint was not supported
until API v1.25, we can "safely" use Size instead; see:
- 4ae7176ffb
- 4352da7803
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
notary server version 0.5.0 is linux/amd64 only.
Also, e2e stage from top level Dockerfile uses 0.6.1 notary version -
change the Dockerfiles in e2e/testdata to have the same version.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This makes it possible to update the image loaded for e2e tests without
modifying all tests that use them.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
These were deprecated in eb0ba4f8d5, which
was part of docker 19.03, so users should have had a chance to migrate.
This removes InStream, OutStream, NewInStream and NewOutStream
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes the cli erroring out if the variable is set to an empty
value.
```
$ export DOCKER_BUILDKIT=
$ docker version
DOCKER_BUILDKIT environment variable expects boolean value: strconv.ParseBool: parsing "": invalid syntax
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Since Swarm does not use the `build` section, there's no reason to validate properties here.
This makes it so we don't have to keep updating the schema in the CLI to support properties
added in the Compose Spec for build, and does not imply any new feature support since Swarm
does not consider this section.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Mostly, this makes sure that literals (such as true, false, host,
private, examples of options usage etc.) are typeset in bold, except for
filenames, which are typeset in italic.
While at it,
- remove some default values from synopsis as it should not
be there;
- fix man pages references (page name in bold, volume number in
regular).
This is not a complete fix, but a step in the right direction.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Escape asterisks and underscores, that have special meaning in
Markdown. While most markdown processors are smart enough to
distinguish whether it's a literal * or _ or a formatting directive,
escaping makes things more explicit.
2. Fix using wrong level of headings in some dm options (most are ####,
but some were #####).
3. Do not use sub-heading for examples in some dm options (this is how
it's done in the rest of the man page).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The `oom-score-adjust` option was added to prevent the daemon from being
OOM-killed before other processes. This option was mostly added as a
convenience, as running the daemon as a systemd unit was not yet common.
Having the daemon set its own limits is not best-practice, and something
better handled by the process-manager starting the daemon.
Docker v20.10 and newer no longer adjust the daemon's OOM score by default,
instead setting the OOM-score to the systemd unit (OOMScoreAdjust) that's
shipped with the packages.
Users currently depending on this feature are recommended to adjust the
daemon's OOM score using systemd or through other means, when starting
the daemon.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For moby/moby PR 45025 (Docker v24, API v1.43).
`docker run --annotation foo=bar` is similar to `podman run --annotation foo=bar`,
however, unlike Podman, Docker implementation also accepts an annotation with an empty value.
(`docker run --annotation foo`)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Set the client's API version that's used in the info, instead of requesting
it as part of printing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make this function only _print_ the info we have, and not read the username
from the credential-store.
This patch adds a Username field to the (local) `info` type, and sets it
when needed, so that prettyPrintServerInfo only has to format and print
the information, instead of calling out to the credential-store.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting with b4ca1c7368, docker login
no longer depends on info.IndexServerAddress to determine the default
registry.
The prettyPrintServerInfo() still depended on this information, which
could potentially show the wrong information.
This patch changes it to also depend on the same information as docker login
now does.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The IndexServerAddress field was as part of the initial Windows implementation
of the engine. For legal reasons, Microsoft Windows (and thus Docker images
based on Windows) were not allowed to be distributed through non-Microsoft
infrastructure. As a temporary solution, a dedicated "registry-win-tp3.docker.io"
registry was created to serve Windows images.
Currently, this field always shows "https://index.docker.io/v1/", which is
confusing, because that address is not used for the registry (only for
authentication and "v1" search).
docker info
...
Registry: https://index.docker.io/v1/
Starting with b4ca1c7368, this field is also
no longer used during authentication, and a3d56e7d06
removed the (deprecated) ElectAuthServer() which was previously used to
query it.
Given that there's currently no practical use for this information, and
it only adds "noise" (and confusion), this patch removes it from the default
output.
For now, the field is (still) available for those that want to use it;
docker info --format '{{.IndexServerAddress}}'
https://index.docker.io/v1/
But it won't be printed by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Deprecate this function in favor of the implementation in the API types,
considering that to be the canonical implementation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility provides the same logic as was implemented here (and using it
aligns with the "docker pull" equivalent).
Also added a TODO to replace this function with the regular "docker pull"
code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Replace uses of this function in favor of the implementation in the
API types, so that we have a single, canonical implementation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
changes readInput() to trim whitespace. The existing code tried to be
conservative and only trimmed whitespace for username (not for password).
Passwords with leading/trailing whitespace would be _very_ unlikely, and
trimming whitespace is generally accepted.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
ConfigureAuth used the readInput() utility to read the username and password.
However, this utility did not return errors it encountered, but instead did
an os.Exit(1). A result of this was that the terminal was not restored if
an error happened. When reading the password, the terminal is configured to
disable echo (i.e. characters are not printed), and failing to restore
the previous state means that the terminal is now "non-functional".
This patch:
- changes readInput() to return errors it encounters
- uses a defer() to restore terminal state
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No need to mention that the env-var may be removed at that point to keep
the description more to-the-point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for this environment variable was removed in docker 23.0 in
1240f8b41d
From that patch:
> All regular, non-EOL Linux distros now come with more recent kernels
> out of the box. There may still be users trying to run on kernel 3.10
> or older (some embedded systems, e.g.), but those should be a rare
> exception, which we don't have to take into account.
>
> This patch removes the kernel version check on Linux, and the corresponding
> DOCKER_NOWARN_KERNEL_VERSION environment that was there to skip this
> check.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function no longer uses the /info endpoint to resolve the registry
to use. The documentation for this function was still referring to
the (once used) special registry for Windows images, which is no longer
in use, so update the docs to reflect reality :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch adds additional information to the Client section of the output.
We were already outputting versions of CLI Plugins, and the Server, but not
for the Client.
Adding this information can help with bug-reports where the reporter only
provided the `docker info` output, or (e.g.) only `docker --version`. The
platform name helps identify what kind of builds the user has installed
(e.g. docker's docker-ce packages have "Docker Engine - Community" set
for this), although we should consider including "packager" information
as a more formalized field for this information.
Before this patch:
$ docker info
Client:
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.10.4
Path: /usr/libexec/docker/cli-plugins/docker-buildx
...
With this patch applied:
$ docker info
Client: Docker Engine - Community
Version: 24.0.0-dev
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.10.4
Path: /usr/libexec/docker/cli-plugins/docker-buildx
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the type to be used for situations where this information is
not present, or not to be printed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Platform field was defined with omitempty, but would always be shown
in the JSON output, because it was never nil.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's defined on a non-exported type, and was only used in a template.
Replacing for a basic "nil" check, which should do the same.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --format=json option was added for all inspect commands, but was not
implemented for "docker version". This patch implements the missing option.
Before this patch:
docker version --format=json
json
With this patch:
docker version --format=json
{"Client":{"Platform":{"Name":""},"Version":"24.0.0-dev","ApiVersion":"..."}}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --format=json option was added for all inspect commands, but was not implemented
for "docker info". This patch implements the missing option.
Before this patch:
docker info --format=json
json
With this patch applied:
docker info --format=json
{"ID":"80c2f18a-2c88-4e4a-ba69-dca0eea59835","Containers":7,"ContainersRunning":"..."}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Of both "--quiet" and "--format" are set, --quiet takes precedence. This
patch adds a warning to inform the user that their custom format is not
used:
docker ps --format='{{.Image}}'
ubuntu:22.04
alpine
docker ps --format='{{.Image}}' --quiet
WARNING: Ignoring custom format, because both --format and --quiet are set.
40111f61d5c5
482efdf39fac
The warning is printed on STDERR, so can be redirected:
docker ps --format='{{.Image}}' --quiet 2> /dev/null
40111f61d5c5
482efdf39fac
The warning is only shown if the format is set using the "--format" option.
No warning is shown if a custom format is set through the CLI configuration
file:
mkdir -p ~/.docker/
echo '{"psFormat": "{{.Image}}"}' > ~/.docker/config.json
docker ps
ubuntu:22.04
alpine
docker ps --quiet
40111f61d5c5
482efdf39fac
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, the formatter would ignore the quiet option if a custom format
was passed; this situation was handled in runPs(), where custom formats
would only be applied if the quiet option was not set, but only if the
format was set in the CLI's config.
This patch updates NewContainerFormat() to do the same, even if a `--format`
was passed on the command-line.
This is a change in behavior, so may need some discussion; possible alternatives;
- produce an error if both `--format` and `--quiet` are passed
- print a warning if both are passed (but use the logic from this patch)
Before this patch:
```console
docker ps --format '{{.Image}}'
ubuntu:22.04
alpine
docker ps --format '{{.Image}}' --quiet
ubuntu:22.04
alpine
mkdir -p ~/.docker/
echo '{"psFormat": "{{.Image}}"}' > ~/.docker/config.json
docker ps
ubuntu:22.04
alpine
docker ps --quiet
ubuntu:22.04
alpine
```
With this patch applied:
```console
docker ps --format '{{.Image}}'
ubuntu:22.04
alpine
docker ps --format '{{.Image}}' --quiet
40111f61d5c5
482efdf39fac
mkdir -p ~/.docker/
echo '{"psFormat": "{{.Image}}"}' > ~/.docker/config.json
docker ps
ubuntu:22.04
alpine
docker ps --quiet
40111f61d5c5
482efdf39fac
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- containerConfig collided with the containerConfig type
- warning collided with the warning const
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
release notes: https://github.com/spf13/cobra/releases/tag/v1.7.0
Features
- Allow to preserve ordering of completions in bash, zsh, pwsh, & fish
- Add support for PowerShell 7.2+ in completions
- Allow sourcing zsh completion script
Bug fixes
- Don't remove flag values that match sub-command name
- Fix powershell completions not returning single word
- Remove masked template import variable name
- Correctly detect completions with dash in argument
Testing & CI/CD
- Deprecate Go 1.15 in CI
- Deprecate Go 1.16 in CI
- Add testing for Go 1.20 in CI
- Add tests to illustrate unknown flag bug
Maintenance
- Update main image to better handle dark backgrounds
- Fix stale.yaml mispellings
- Remove stale bot from GitHub actions
- Add makefile target for installing dependencies
- Add Sia to projects using Cobra
- Add Vitess and Arewefastyet to projects using cobra
- Fixup for Kubescape github org
- Fix route for GitHub workflows badge
- Fixup for GoDoc style documentation
- Various bash scripting improvements for completion
- Add Constellation to projects using Cobra
Documentation
- Add documentation about disabling completion descriptions
- Improve MarkFlagsMutuallyExclusive example in user guide
- Update shell_completions.md
- Update copywrite year
- Document suggested layout of subcommands
- Replace deprecated ExactValidArgs with MatchAll in doc
full diff: https://github.com/spf13/cobra/compare/v1.6.1...v1.7.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 1e3622c50c moved the generator code
to a subdirectory, but forgot to update the markdown version of this script.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.3 (released 2023-04-04) includes security fixes to the go/parser,
html/template, mime/multipart, net/http, and net/textproto packages, as well
as bug fixes to the compiler, the linker, the runtime, and the time package.
See the Go 1.20.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.2...go1.20.3
Further details from the announcement on the mailing list:
We have just released Go versions 1.20.3 and 1.19.8, minor point releases.
These minor releases include 4 security fixes following the security policy:
- go/parser: infinite loop in parsing
Calling any of the Parse functions on Go source code which contains `//line`
directives with very large line numbers can cause an infinite loop due to
integer overflow.
Thanks to Philippe Antoine (Catena cyber) for reporting this issue.
This is CVE-2023-24537 and Go issue https://go.dev/issue/59180.
- html/template: backticks not treated as string delimiters
Templates did not properly consider backticks (`) as Javascript string
delimiters, and as such did not escape them as expected. Backticks are
used, since ES6, for JS template literals. If a template contained a Go
template action within a Javascript template literal, the contents of the
action could be used to terminate the literal, injecting arbitrary Javascript
code into the Go template.
As ES6 template literals are rather complex, and themselves can do string
interpolation, we've decided to simply disallow Go template actions from being
used inside of them (e.g. "var a = {{.}}"), since there is no obviously safe
way to allow this behavior. This takes the same approach as
github.com/google/safehtml. Template.Parse will now return an Error when it
encounters templates like this, with a currently unexported ErrorCode with a
value of 12. This ErrorCode will be exported in the next major release.
Users who rely on this behavior can re-enable it using the GODEBUG flag
jstmpllitinterp=1, with the caveat that backticks will now be escaped. This
should be used with caution.
Thanks to Sohom Datta, Manipal Institute of Technology, for reporting this issue.
This is CVE-2023-24538 and Go issue https://go.dev/issue/59234.
- net/http, net/textproto: denial of service from excessive memory allocation
HTTP and MIME header parsing could allocate large amounts of memory, even when
parsing small inputs.
Certain unusual patterns of input data could cause the common function used to
parse HTTP and MIME headers to allocate substantially more memory than
required to hold the parsed headers. An attacker can exploit this behavior to
cause an HTTP server to allocate large amounts of memory from a small request,
potentially leading to memory exhaustion and a denial of service.
Header parsing now correctly allocates only the memory required to hold parsed
headers.
Thanks to Jakob Ackermann (@das7pad) for discovering this issue.
This is CVE-2023-24534 and Go issue https://go.dev/issue/58975.
- net/http, net/textproto, mime/multipart: denial of service from excessive resource consumption
Multipart form parsing can consume large amounts of CPU and memory when
processing form inputs containing very large numbers of parts. This stems from
several causes:
mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form
can consume. ReadForm could undercount the amount of memory consumed, leading
it to accept larger inputs than intended. Limiting total memory does not
account for increased pressure on the garbage collector from large numbers of
small allocations in forms with many parts. ReadForm could allocate a large
number of short-lived buffers, further increasing pressure on the garbage
collector. The combination of these factors can permit an attacker to cause an
program that parses multipart forms to consume large amounts of CPU and
memory, potentially resulting in a denial of service. This affects programs
that use mime/multipart.Reader.ReadForm, as well as form parsing in the
net/http package with the Request methods FormFile, FormValue,
ParseMultipartForm, and PostFormValue.
ReadForm now does a better job of estimating the memory consumption of parsed
forms, and performs many fewer short-lived allocations.
In addition, mime/multipart.Reader now imposes the following limits on the
size of parsed forms:
Forms parsed with ReadForm may contain no more than 1000 parts. This limit may
be adjusted with the environment variable GODEBUG=multipartmaxparts=. Form
parts parsed with NextPart and NextRawPart may contain no more than 10,000
header fields. In addition, forms parsed with ReadForm may contain no more
than 10,000 header fields across all parts. This limit may be adjusted with
the environment variable GODEBUG=multipartmaxheaders=.
Thanks to Jakob Ackermann for discovering this issue.
This is CVE-2023-24536 and Go issue https://go.dev/issue/59153.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Touch-up GoDoc to better document each method, adding punctuation, and
use doc-links where applicable.
- SetRawTerminal(): change the order in which we check if a terminal is
connected; check the local boolean first before checking if the NORAW
env-var is set.
- NewOut() / NewIn(); remove intermediate variables
- Remove explicit use of the embedded "commonStream" to make the code
slightly less verbose, and more "to the point".
- Document the intended purpose of SetIsTerminal(), which was added in
b2551c619d
to be used in unit-tests.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was deprecated in 6ea2767289, which
is part of docker 23.0, so users should have had a chance to migrate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was deprecated in 15535d4594, which
is part of docker 23.0, so users should have had a chance to migrate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were deprecated in 3499669e18, which
is part of docker 23.0, so users should have had a chance to migrate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were deprecated in de6020a240, which
is part of docker 23.0, so users should have had a chance to migrate.
This removes IsErrContextDoesNotExist() and IsErrTLSDataDoesNotExist()
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was deprecated in 467e650d4c, which
is part of docker 23.0, so users should have had a chance to migrate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were deprecated in 6c400a9c2009bba9376ad61ab59c04c1ad675871 (docker 19.03),
but the "Deprecated:" comments were missing a newline before them.
While most IDEs will detect such comments as "deprecated", pkg.go.dev and linters
will ignore them, which may result in users not being aware of them being deprecated.
This patch;
- Fixes the "Deprecated:" comments.
- Changes the var aliases to functions, which is slightly more boilerplating,
but makes sure the functions are documented as "function", instead of shown
in the "variables" section on pkg.go.dev.
- Adds some punctuation and adds "doc links", which allows readers to navigate
to related content on pkg.go.dev.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 62f2358b99.
Spawning a goroutine for each iteration in the loop when listing
plugins is racy unfortunately. `plugins` slice is protected with
a mutex so not sure why it fails.
I tried using a channel to collect the plugins instead of a slice
to guarantee that they will be appended to the list in the order
they are processed but no dice.
I also tried without errgroup package and simply use sync.WaitGroup
but same. I have also created an extra channel to receive errors
from the goroutines but racy too.
I think the change in this function is not related to the race
condition but newPlugin is. So revert in the meantime :(
Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>
This moves all the terminal writing to a goroutine that updates the
terminal periodically.
In our MITM copier we just use an atomic to add to the total number of
bytes read/written, the goroutine reads the total and updates the
terminal as needed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
internal/test/cli.go:184:34: unused-parameter: parameter 'insecure' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeCli) RegistryClient(insecure bool) registryclient.RegistryClient {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
internal/test/notary/client.go:16:33: unused-parameter: parameter 'imgRefAndAuth' seems to be unused, consider removing or renaming it as _ (revive)
func GetOfflineNotaryRepository(imgRefAndAuth trust.ImageRefAndAuth, actions []string) (client.Repository, error) {
^
internal/test/notary/client.go:25:45: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) Initialize(rootKeyIDs []string, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:30:60: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) InitializeWithCertificate(rootKeyIDs []string, rootCerts []data.PublicKey, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:42:44: unused-parameter: parameter 'target' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) AddTarget(target *client.Target, roles ...data.RoleName) error {
^
internal/test/notary/client.go:48:47: unused-parameter: parameter 'targetName' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RemoveTarget(targetName string, roles ...data.RoleName) error {
^
internal/test/notary/client.go:54:46: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) ListTargets(roles ...data.RoleName) ([]*client.TargetWithRole, error) {
^
internal/test/notary/client.go:59:50: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) GetTargetByName(name string, roles ...data.RoleName) (*client.TargetWithRole, error) {
^
internal/test/notary/client.go:65:61: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) GetAllTargetMetadataByName(name string) ([]client.TargetSignedStruct, error) {
^
internal/test/notary/client.go:85:48: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) AddDelegation(name data.RoleName, delegationKeys []data.PublicKey, paths []string) error {
^
internal/test/notary/client.go:90:59: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) AddDelegationRoleAndKeys(name data.RoleName, delegationKeys []data.PublicKey) error {
^
internal/test/notary/client.go:95:53: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) AddDelegationPaths(name data.RoleName, paths []string) error {
^
internal/test/notary/client.go💯63: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RemoveDelegationKeysAndPaths(name data.RoleName, keyIDs, paths []string) error {
^
internal/test/notary/client.go:105:55: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RemoveDelegationRole(name data.RoleName) error {
^
internal/test/notary/client.go:110:56: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RemoveDelegationPaths(name data.RoleName, paths []string) error {
^
internal/test/notary/client.go:115:55: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RemoveDelegationKeys(name data.RoleName, keyIDs []string) error {
^
internal/test/notary/client.go:120:55: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) ClearDelegationPaths(name data.RoleName) error {
^
internal/test/notary/client.go:126:42: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) Witness(roles ...data.RoleName) ([]data.RoleName, error) {
^
internal/test/notary/client.go:131:44: unused-parameter: parameter 'role' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) RotateKey(role data.RoleName, serverManagesKey bool, keyList []string) error {
^
internal/test/notary/client.go:142:52: unused-parameter: parameter 'version' seems to be unused, consider removing or renaming it as _ (revive)
func (o OfflineNotaryRepository) SetLegacyVersions(version int) {}
^
internal/test/notary/client.go:150:39: unused-parameter: parameter 'imgRefAndAuth' seems to be unused, consider removing or renaming it as _ (revive)
func GetUninitializedNotaryRepository(imgRefAndAuth trust.ImageRefAndAuth, actions []string) (client.Repository, error) {
^
internal/test/notary/client.go:163:51: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) Initialize(rootKeyIDs []string, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:168:66: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) InitializeWithCertificate(rootKeyIDs []string, rootCerts []data.PublicKey, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:180:52: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) ListTargets(roles ...data.RoleName) ([]*client.TargetWithRole, error) {
^
internal/test/notary/client.go:185:56: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) GetTargetByName(name string, roles ...data.RoleName) (*client.TargetWithRole, error) {
^
internal/test/notary/client.go:191:67: unused-parameter: parameter 'name' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) GetAllTargetMetadataByName(name string) ([]client.TargetSignedStruct, error) {
^
internal/test/notary/client.go:206:50: unused-parameter: parameter 'role' seems to be unused, consider removing or renaming it as _ (revive)
func (u UninitializedNotaryRepository) RotateKey(role data.RoleName, serverManagesKey bool, keyList []string) error {
^
internal/test/notary/client.go:211:38: unused-parameter: parameter 'imgRefAndAuth' seems to be unused, consider removing or renaming it as _ (revive)
func GetEmptyTargetsNotaryRepository(imgRefAndAuth trust.ImageRefAndAuth, actions []string) (client.Repository, error) {
^
internal/test/notary/client.go:223:50: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (e EmptyTargetsNotaryRepository) Initialize(rootKeyIDs []string, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:228:65: unused-parameter: parameter 'rootKeyIDs' seems to be unused, consider removing or renaming it as _ (revive)
func (e EmptyTargetsNotaryRepository) InitializeWithCertificate(rootKeyIDs []string, rootCerts []data.PublicKey, serverManagedRoles ...data.RoleName) error {
^
internal/test/notary/client.go:240:51: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (e EmptyTargetsNotaryRepository) ListTargets(roles ...data.RoleName) ([]*client.TargetWithRole, error) {
^
internal/test/notary/client.go:245:68: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (e EmptyTargetsNotaryRepository) GetTargetByName(name string, roles ...data.RoleName) (*client.TargetWithRole, error) {
^
internal/test/notary/client.go:284:49: unused-parameter: parameter 'role' seems to be unused, consider removing or renaming it as _ (revive)
func (e EmptyTargetsNotaryRepository) RotateKey(role data.RoleName, serverManagesKey bool, keyList []string) error {
^
internal/test/notary/client.go:289:32: unused-parameter: parameter 'imgRefAndAuth' seems to be unused, consider removing or renaming it as _ (revive)
func GetLoadedNotaryRepository(imgRefAndAuth trust.ImageRefAndAuth, actions []string) (client.Repository, error) {
^
internal/test/notary/client.go:509:45: unused-parameter: parameter 'imgRefAndAuth' seems to be unused, consider removing or renaming it as _ (revive)
func GetLoadedWithNoSignersNotaryRepository(imgRefAndAuth trust.ImageRefAndAuth, actions []string) (client.Repository, error) {
^
internal/test/notary/client.go:532:75: unused-parameter: parameter 'roles' seems to be unused, consider removing or renaming it as _ (revive)
func (l LoadedWithNoSignersNotaryRepository) GetTargetByName(name string, roles ...data.RoleName) (*client.TargetWithRole, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/config/configfile/file_test.go:189:33: unused-parameter: parameter 'authConfig' seems to be unused, consider removing or renaming it as _ (revive)
func (c *mockNativeStore) Store(authConfig types.AuthConfig) error {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/compose/schema/schema.go:20:44: unused-parameter: parameter 'input' seems to be unused, consider removing or renaming it as _ (revive)
func (checker portsFormatChecker) IsFormat(input interface{}) bool {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/volume/prune_test.go:113:22: unused-parameter: parameter 'args' seems to be unused, consider removing or renaming it as _ (revive)
func simplePruneFunc(args filters.Args) (types.VolumesPruneReport, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/service/update_test.go:507:41: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (s secretAPIClientMock) SecretList(ctx context.Context, options types.SecretListOptions) ([]swarm.Secret, error) {
^
cli/command/service/update_test.go:511:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (s secretAPIClientMock) SecretCreate(ctx context.Context, secret swarm.SecretSpec) (types.SecretCreateResponse, error) {
^
cli/command/service/update_test.go:515:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (s secretAPIClientMock) SecretRemove(ctx context.Context, id string) error {
^
cli/command/service/update_test.go:519:51: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (s secretAPIClientMock) SecretInspectWithRaw(ctx context.Context, name string) (swarm.Secret, []byte, error) {
^
cli/command/service/update_test.go:523:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (s secretAPIClientMock) SecretUpdate(ctx context.Context, id string, version swarm.Version, secret swarm.SecretSpec) error {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/plugin/client_test.go:23:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginCreate(ctx context.Context, createContext io.Reader, createOptions types.PluginCreateOptions) error {
^
cli/command/plugin/client_test.go:30:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginEnable(ctx context.Context, name string, enableOptions types.PluginEnableOptions) error {
^
cli/command/plugin/client_test.go:37:36: unused-parameter: parameter 'context' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginDisable(context context.Context, name string, disableOptions types.PluginDisableOptions) error {
^
cli/command/plugin/client_test.go:44:35: unused-parameter: parameter 'context' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginRemove(context context.Context, name string, removeOptions types.PluginRemoveOptions) error {
^
cli/command/plugin/client_test.go:51:36: unused-parameter: parameter 'context' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginInstall(context context.Context, name string, installOptions types.PluginInstallOptions) (io.ReadCloser, error) {
^
cli/command/plugin/client_test.go:58:33: unused-parameter: parameter 'context' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginList(context context.Context, filter filters.Args) (types.PluginsListResponse, error) {
^
cli/command/plugin/client_test.go:66:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) PluginInspectWithRaw(ctx context.Context, name string) (*types.Plugin, []byte, error) {
^
cli/command/plugin/client_test.go:74:27: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) Info(ctx context.Context) (types.Info, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/image/build/context_test.go:21:19: unused-parameter: parameter 't' seems to be unused, consider removing or renaming it as _ (revive)
func prepareEmpty(t *testing.T) string {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I could either remove the name for these contexts, or make the fake functions
more accurately reflect the actual implementation (decided to go for the latter
one)
cli/command/secret/client_test.go:19:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) SecretCreate(ctx context.Context, spec swarm.SecretSpec) (types.SecretCreateResponse, error) {
^
cli/command/secret/client_test.go:26:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) SecretInspectWithRaw(ctx context.Context, id string) (swarm.Secret, []byte, error) {
^
cli/command/secret/client_test.go:33:33: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) SecretList(ctx context.Context, options types.SecretListOptions) ([]swarm.Secret, error) {
^
cli/command/secret/client_test.go:40:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) SecretRemove(ctx context.Context, name string) error {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I could either remove the name for these contexts, or make the fake functions
more accurately reflect the actual implementation (decided to go for the latter
one)
. cli/command/config/client_test.go:19:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) ConfigCreate(ctx context.Context, spec swarm.ConfigSpec) (types.ConfigCreateResponse, error) {
^
cli/command/config/client_test.go:26:43: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) ConfigInspectWithRaw(ctx context.Context, id string) (swarm.Config, []byte, error) {
^
cli/command/config/client_test.go:33:33: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) ConfigList(ctx context.Context, options types.ConfigListOptions) ([]swarm.Config, error) {
^
cli/command/config/client_test.go:40:35: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *fakeClient) ConfigRemove(ctx context.Context, name string) error {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Only a single method of the FakeClient was actually implemented (and used).
This patch embeds the interface it must implement to reduce the boilerplating
for not yet implemented methods.
Calling any of the unimplemented methods will result in a panic, which will
make it clear when they must be implemented :)
This also fixes various linting errors;
internal/test/network/client.go:17:37: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworkConnect(ctx context.Context, networkID, container string, config *network.EndpointSettings) error {
^
internal/test/network/client.go:22:65: unused-parameter: parameter 'options' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworkCreate(_ context.Context, _ string, options types.NetworkCreate) (types.NetworkCreateResponse, error) {
^
internal/test/network/client.go:27:40: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworkDisconnect(ctx context.Context, networkID, container string, force bool) error {
^
internal/test/network/client.go:45:53: unused-parameter: parameter 'options' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworkList(_ context.Context, options types.NetworkListOptions) ([]types.NetworkResource, error) {
^
internal/test/network/client.go:50:36: unused-parameter: parameter 'ctx' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworkRemove(ctx context.Context, networkID string) error {
^
internal/test/network/client.go:55:55: unused-parameter: parameter 'pruneFilter' seems to be unused, consider removing or renaming it as _ (revive)
func (c *FakeClient) NetworksPrune(_ context.Context, pruneFilter filters.Args) (types.NetworksPruneReport, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These method must implements an interface, but don't use the argument.
cli/trust/trust.go:85:40: unused-parameter: parameter 'u' seems to be unused, consider removing or renaming it as _ (revive)
func (scs simpleCredentialStore) Basic(u *url.URL) (string, string) {
^
cli/trust/trust.go:89:47: unused-parameter: parameter 'u' seems to be unused, consider removing or renaming it as _ (revive)
func (scs simpleCredentialStore) RefreshToken(u *url.URL, service string) string {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
opts/capabilities.go:25:2: redefines-builtin-id: redefinition of the built-in function cap (revive)
cap = strings.ToUpper(strings.TrimSpace(cap))
^
opts/capabilities.go:30:3: redefines-builtin-id: redefinition of the built-in function cap (revive)
cap = "CAP_" + cap
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This method implements the interface defined in distribution, but doesn't
use the argument.
cli/registry/client/endpoint.go:123:69: unused-parameter: parameter 'params' seems to be unused, consider removing or renaming it as _ (revive)
func (th *existingTokenHandler) AuthorizeRequest(req *http.Request, params map[string]string) error {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function must match the interface, but doesn't use the firs argument.
cli/command/service/progress/progress.go:417:40: unused-parameter: parameter 'service' seems to be unused, consider removing or renaming it as _ (revive)
func (u *globalProgressUpdater) update(service swarm.Service, tasks []swarm.Task, activeNodes map[string]struct{}, rollback bool) (bool, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These functions must have the same signature, but only some of them accept
an "all" boolean argument;
88924b1802/cli/command/system/prune.go (L79)
cli/command/container/prune.go:78:38: unused-parameter: parameter 'all' seems to be unused, consider removing or renaming it as _ (revive)
func RunPrune(dockerCli command.Cli, all bool, filter opts.FilterOpt) (uint64, string, error) {
^
cli/command/network/prune.go:73:38: unused-parameter: parameter 'all' seems to be unused, consider removing or renaming it as _ (revive)
func RunPrune(dockerCli command.Cli, all bool, filter opts.FilterOpt) (uint64, string, error) {
^
cli/command/volume/prune.go:78:38: unused-parameter: parameter 'all' seems to be unused, consider removing or renaming it as _ (revive)
func RunPrune(dockerCli command.Cli, all bool, filter opts.FilterOpt) (uint64, string, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These wrappers were added to abstract stack deploy to k8s and swarm. Now
that support for deploying to k8s was removed, we can remove these wrappers.
This deprecates:
- RunDeploy()
- RunPs()
- RunRemove()
- GetServices()
This also addresses some linting failers, due to these functions having
unused arguments:
cli/command/stack/deploy.go:51:39: unused-parameter: parameter 'flags' seems to be unused, consider removing or renaming it as _ (revive)
func RunDeploy(dockerCli command.Cli, flags *pflag.FlagSet, config *composetypes.Config, opts options.Deploy) error {
^
cli/command/stack/ps.go:42:35: unused-parameter: parameter 'flags' seems to be unused, consider removing or renaming it as _ (revive)
func RunPs(dockerCli command.Cli, flags *pflag.FlagSet, opts options.PS) error {
^
cli/command/stack/remove.go:35:39: unused-parameter: parameter 'flags' seems to be unused, consider removing or renaming it as _ (revive)
func RunRemove(dockerCli command.Cli, flags *pflag.FlagSet, opts options.Remove) error {
^
cli/command/stack/list.go:37:14: unused-parameter: parameter 'cmd' seems to be unused, consider removing or renaming it as _ (revive)
func RunList(cmd *cobra.Command, dockerCli command.Cli, opts options.List) error {
^
cli/command/stack/services.go:56:41: unused-parameter: parameter 'flags' seems to be unused, consider removing or renaming it as _ (revive)
func GetServices(dockerCli command.Cli, flags *pflag.FlagSet, opts options.Services) ([]swarmtypes.Service, error) {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/container/run.go:176:3: redefines-builtin-id: redefinition of the built-in function close (revive)
close, err := attachContainer(ctx, dockerCli, &errCh, config, createResponse.ID)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Only show progress updates after a time threshold has elapsed in order
to reduce the number of writes to the terminal.
This improves readability of the progress.
Also moves cursor show/hide into the progress printer to reduce chances
if messing up the user's terminal in case of cancellation.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Edited second paragraph under ### Daemon configuration file to change "regardless their value" to "regardless of their value"
Signed-off-by: Jake Stokes <contactjake@developerjake.com>
- Instead of rewriting the entire line every time only clear and write
the parts that changed.
- Hide the cursor while writing progress
Both these things make the progress updates significantly easier to
read.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fixes a case where a non-tty will have control characters + the log
line for every single read operation.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
We are currently loading plugin command stubs for every
invocation which still has a significant performance hit.
With this change we are doing this operation only if cobra
completion arg request is found.
- 20.10.23: `docker --version` takes ~15ms
- 23.0.1: `docker --version` takes ~93ms
With this change `docker --version` takes ~9ms
Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>
We are currently loading plugin commands stubs for every
command invocation to add support for Cobra v2 completion.
This cause a significant performance hit if there is a
lot of plugins in the user space (7 atm in Docker Desktop):
`docker --version` takes in current 23.0.1 ~93ms
Instead of removing completion for plugins to fix the
regression, we can slightly improve plugins discovery by
spawning a goroutine for each iteration in the loop when
listing plugins:
`docker --version` now takes ~38ms
Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>
This code depended on the registry Service interface, which has been removed,
so needed to be refactored. Digging further into the reason this code existed,
it looked like the Class=plugin was previously required on Docker Hub to handle
plugins, but this requirement is no longer there, so we can remove this special
handling.
This patch removes the special handling to both remove the use of the registry.Service
interface, as well as removing complexity that is no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was deprecated in b4ca1c7368,
which is part of the v23.0 release, and is no longer used, so we can remove it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The comment was not formatted correctly, and because of that not picked up as
being deprecated.
updates b4ca1c7368
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were deliberately producing errors as part of the test, but
printing those errors could be confusing / make it more difficult to find
actual test-failures.
Before this patch:
=== RUN TestVolumeCreateErrors
Error: conflicting options: either specify --name or provide positional arg, not both
Error: "create" requires at most 1 argument.
See 'create --help'.
Usage: create [OPTIONS] [VOLUME] [flags]
Create a volume
Error: error creating volume
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
With this patch applied:
=== RUN TestVolumeCreateErrors
--- PASS: TestVolumeCreateErrors (0.00s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Includes a security fix for crypto/elliptic (CVE-2023-24532).
> go1.19.7 (released 2023-03-07) includes a security fix to the crypto/elliptic
> package, as well as bug fixes to the linker, the runtime, and the crypto/x509
> and syscall packages. See the Go 1.19.7 milestone on our issue tracker for
> details.
https://go.dev/doc/devel/release#go1.19.minor
From the announcement:
> We have just released Go versions 1.20.2 and 1.19.7, minor point releases.
>
> These minor releases include 1 security fixes following the security policy:
>
> - crypto/elliptic: incorrect P-256 ScalarMult and ScalarBaseMult results
>
> The ScalarMult and ScalarBaseMult methods of the P256 Curve may return an
> incorrect result if called with some specific unreduced scalars (a scalar larger
> than the order of the curve).
>
> This does not impact usages of crypto/ecdsa or crypto/ecdh.
>
> This is CVE-2023-24532 and Go issue https://go.dev/issue/58647.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the error more specific by stating that it's caused by a specific
environment variable and not an environment as a whole.
Also don't escape the variable to make it more readable.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
On Windows, ignore all variables that start with "=" when building an
environment variables map for stack.
For MS-DOS compatibility cmd.exe can set some special environment
variables that start with a "=" characters, which breaks the general
assumption that the first encountered "=" separates a variable name from
variable value and causes trouble when parsing.
These variables don't seem to be documented anywhere, but they are
described by some third-party sources and confirmed empirically on my
Windows installation.
Useful sources:
https://devblogs.microsoft.com/oldnewthing/20100506-00/?p=14133https://ss64.com/nt/syntax-variables.html
Known variables:
- `=ExitCode` stores the exit code returned by external command (in hex
format)
- `=ExitCodeAscii` - same as above, except the value is the ASCII
representation of the code (so exit code 65 (0x41) becomes 'A').
- `=::=::\` and friends - store drive specific working directory.
There is one env variable for each separate drive letter that was
accessed in the shell session and stores the working directory for that
specific drive.
The general format for these is:
`=<DRIVE_LETTER>:=<CWD>` (key=`=<DRIVE_LETTER>:`, value=`<CWD>`)
where <CWD> is a working directory for the drive that is assigned to
the letter <DRIVE_LETTER>
A couple of examples:
`=C:=C:\some\dir` (key: `=C:`, value: `C:\some\dir`)
`=D:=D:\some\other\dir` (key: `=C:`, value: `C:\some\dir`)
`=Z:=Z:\` (key: `=Z:`, value: `Z:\`)
`=::=::\` is the one that seems to be always set and I'm not exactly
sure what this one is for (what's drive `::`?). Others are set as
soon as you CD to a path on some drive. Considering that you start a
cmd.exe also has some working directory, there are 2 of these on start.
All these variables can be safely ignored because they can't be
deliberately set by the user, their meaning is only relevant to the
cmd.exe session and they're all are related to the MS-DOS/Batch feature
that are irrelevant for us.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Tests mocking the output of GET images/json with fakeClient used an
array with one empty element as an empty response.
Change it to just an empty array.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
go1.19.6 (released 2023-02-14) includes security fixes to the crypto/tls,
mime/multipart, net/http, and path/filepath packages, as well as bug fixes to
the go command, the linker, the runtime, and the crypto/x509, net/http, and
time packages. See the Go 1.19.6 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.19.6+label%3ACherryPickApproved
From the announcement on the security mailing:
We have just released Go versions 1.20.1 and 1.19.6, minor point releases.
These minor releases include 4 security fixes following the security policy:
- path/filepath: path traversal in filepath.Clean on Windows
On Windows, the filepath.Clean function could transform an invalid path such
as a/../c:/b into the valid path c:\b. This transformation of a relative (if
invalid) path into an absolute path could enable a directory traversal attack.
The filepath.Clean function will now transform this path into the relative
(but still invalid) path .\c:\b.
This is CVE-2022-41722 and Go issue https://go.dev/issue/57274.
- net/http, mime/multipart: denial of service from excessive resource
consumption
Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely
unlimited amounts of memory and disk files. This also affects form parsing in
the net/http package with the Request methods FormFile, FormValue,
ParseMultipartForm, and PostFormValue.
ReadForm takes a maxMemory parameter, and is documented as storing "up to
maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts
which cannot be stored in memory are stored on disk in temporary files. The
unconfigurable 10MB reserved for non-file parts is excessively large and can
potentially open a denial of service vector on its own. However, ReadForm did
not properly account for all memory consumed by a parsed form, such as map
ntry overhead, part names, and MIME headers, permitting a maliciously crafted
form to consume well over 10MB. In addition, ReadForm contained no limit on
the number of disk files created, permitting a relatively small request body
to create a large number of disk temporary files.
ReadForm now properly accounts for various forms of memory overhead, and
should now stay within its documented limit of 10MB + maxMemory bytes of
memory consumption. Users should still be aware that this limit is high and
may still be hazardous.
ReadForm now creates at most one on-disk temporary file, combining multiple
form parts into a single temporary file. The mime/multipart.File interface
type's documentation states, "If stored on disk, the File's underlying
concrete type will be an *os.File.". This is no longer the case when a form
contains more than one file part, due to this coalescing of parts into a
single file. The previous behavior of using distinct files for each form part
may be reenabled with the environment variable
GODEBUG=multipartfiles=distinct.
Users should be aware that multipart.ReadForm and the http.Request methods
that call it do not limit the amount of disk consumed by temporary files.
Callers can limit the size of form data with http.MaxBytesReader.
This is CVE-2022-41725 and Go issue https://go.dev/issue/58006.
- crypto/tls: large handshake records may cause panics
Both clients and servers may send large TLS handshake records which cause
servers and clients, respectively, to panic when attempting to construct
responses.
This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable
session resumption (by setting Config.ClientSessionCache to a non-nil value),
and TLS 1.3 servers which request client certificates (by setting
Config.ClientAuth
> = RequestClientCert).
This is CVE-2022-41724 and Go issue https://go.dev/issue/58001.
- net/http: avoid quadratic complexity in HPACK decoding
A maliciously crafted HTTP/2 stream could cause excessive CPU consumption
in the HPACK decoder, sufficient to cause a denial of service from a small
number of small requests.
This issue is also fixed in golang.org/x/net/http2 v0.7.0, for users manually
configuring HTTP/2.
This is CVE-2022-41723 and Go issue https://go.dev/issue/57855.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The error returned from "os/exec".Command when attempting to execute a
directory has been changed from syscall.EACCESS to syscall.EISDIR on
Go 1.20. 2b8f214094
Consequently, any runc runtime built against Go 1.20 will return an
error containing 'is a directory' and not 'permission denied'. Update
the string matching so the CLI exits with status code 126 on 'is a
directory' errors (EISDIR) in addition to 'permission denied' (EACCESS).
Signed-off-by: Cory Snider <csnider@mirantis.com>
The DockerCLI interface was repeating the Streams interface. Embed
the interface to make it more transparent that they're the same.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
flags.DurationVar(&copts.healthTimeout,"health-timeout",0,"Maximum time to allow one check to run (ms|s|m|h) (default 0s)")
flags.DurationVar(&copts.healthStartPeriod,"health-start-period",0,"Start period for the container to initialize before starting health-retries countdown (ms|s|m|h) (default 0s)")
flags.DurationVar(&copts.healthStartInterval,"health-start-interval",0,"Time between running the check during the start period (ms|s|m|h) (default 0s)")
// TODO should we error if _any_ advanced option is used? (i.e. forbid to combine advanced notation with the "old" flags (`--network-alias`, `--link`, `--ip`, `--ip6`)?
iflen(n.Aliases)>0&&copts.aliases.Len()>0{
returnerrdefs.InvalidParameter(errors.New("conflicting options: cannot specify both --network-alias and per-network alias"))
t.Fatalf("Error parsing volume flags, %q should mount-bind the path before the colon into the path after the colon. Received %v %v",arr[0],hostConfig.Binds,config.Volumes)
t.Fatalf("Expected the config to have 'hostname' as 'another-prefix' and 'domainname' as 'domainname.tld', got %q and %q",config.Hostname,config.Domainname)
assert.DeepEqual(t,config.MacAddress,tc.expectedCfg.MacAddress)//nolint:staticcheck // ignore SA1019: field is deprecated, but still used on API < v1.44.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
