91 lines
3.0 KiB
Markdown
91 lines
3.0 KiB
Markdown
# Quick Deployment
|
|
|
|
[](https://github.com/peachcloud/peach-config)
|
|
|
|
The instructions, configuration files and scripts referred to in this section can all be found in the [peach-config repo](https://github.com/peachcloud/peach-config).
|
|
|
|
## Prerequisite Steps
|
|
|
|
Download the latest Debian Buster preview image for RPi3 and flash it to an SD card.
|
|
|
|
Note: Be sure to use the correct device location in the `dd` command, otherwise you risk wiping another connected USB device. `sudo dmesg | tail` can be run after plugging in the SD card to determine the correct device location:
|
|
|
|
```bash
|
|
wget https://raspi.debian.net/verified/20200831_raspi_3.img.xz
|
|
xzcat 20200831_raspi_3.img.xz | sudo dd of=/dev/mmcblk0 bs=64k oflag=dsync status=progress
|
|
```
|
|
|
|
On Mac OS, use the following command to flash the SD card:
|
|
|
|
`xzcat 20200831_raspi_3.img.xz | sudo dd of=/dev/sdcarddisc`
|
|
|
|
Alternatively, use [Etcher](https://www.balena.io/etcher/).
|
|
|
|
Note: if the above image link stops working, you can find the complete list of Raspberry Pi Debian images [here](https://raspi.debian.net/tested-images/).
|
|
|
|
## Setup
|
|
|
|
Quick setup commands to connect to a local WiFi network over the `wlan0` interface (assuming `eth0` connection is not possible):
|
|
|
|
```bash
|
|
# username
|
|
root
|
|
# password (by default raspberry debian requires no password, so we set the password for root here)
|
|
passwd
|
|
# set interface up (run command twice if you receive 'link is not ready' error on first try)
|
|
ip link set wlan0 up
|
|
# append ssid and password for wifi access point
|
|
wpa_passphrase <SSID> <PASS> > /etc/wpa_supplicant/wpa_supplicant.conf
|
|
# open wpa_supplicant.conf
|
|
nano /etc/wpa_supplicant/wpa_supplicant.conf
|
|
```
|
|
|
|
[ Add the following two lines to top of file ]
|
|
|
|
```plaintext
|
|
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wpactrl-user
|
|
update_config=1
|
|
```
|
|
|
|
[ Save and exit ]
|
|
|
|
```bash
|
|
# open network interfaces config
|
|
nano /etc/network/interfaces
|
|
```
|
|
|
|
[ Add the following lines to the file ]
|
|
|
|
```plaintext
|
|
auto lo
|
|
iface lo inet loopback
|
|
|
|
allow-hotplug wlan0
|
|
auto wlan0
|
|
iface wlan0 inet dhcp
|
|
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
|
|
```
|
|
|
|
[ Save and exit ]
|
|
|
|
`reboot now`
|
|
|
|
[ Pi should now be connected to the WiFi network ]
|
|
|
|
## Scripts
|
|
|
|
The `setup_dev_env.py` script can be executed once your Pi is internet-connected and `git` and `python` have been installed. It takes a `<USER>` argument to create a new system user. You will be prompted to enter a password for your newly created user. The script will install system requirements and copy configuration files relating to networking, I2C and RTC.
|
|
The i2c and rtc flags are optional and can be removed for installation without the peripheral hardware.
|
|
|
|
_TODO: Add flags to (de)select Rust install & config. Flags should also be added which allow the installer to choose between development environment and release environment configuration._
|
|
|
|
```bash
|
|
apt update
|
|
apt install git python
|
|
git clone https://github.com/peachcloud/peach-config.git
|
|
cd peach-config
|
|
python scripts/setup_dev_env.py --i2c --rtc ds3231 <USER>
|
|
```
|
|
|
|
|