Signed-off-by: John Howard <jhoward@microsoft.com>
(cherry picked from commit 80fce6d747c5208b42e94ac9e3f22cef28dd8afe)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: fd4670161de8f9947c524138c477177f935c98f2
Component: engine
There's little way of knowing what each exit status means at present
because it's not documented. I'm assuming they are the same as docker
run.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
(cherry picked from commit 23670968cc)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 27ab7cc3d6
Component: cli
Noticed a typo in this markdown file: "instead" instead of "in stead"
Signed-off-by: Ryan Wilson-Perkin <ryanwilsonperkin@gmail.com>
(cherry picked from commit 7a9fc782c5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 1d314f2227
Component: cli
Copies the improved description from the man page
to the online reference docs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 89bc5fbbae)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 275ab1f063
Component: cli
The `docker image rm` command can be used not only
to remove images but also remove tags.
This update improves the documentation to make
this clear.
Signed-off-by: Filip Jareš <filipjares@gmail.com>
(cherry picked from commit 2ba9601ef1)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 0717f261ed
Component: cli
After switching to Go 1.12, the format-string causes an error;
```
=== Errors
cli/config/config_test.go:154:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:217:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:253:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:288:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:435:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
cli/config/config_test.go:448:3: Fatalf format %q has arg config of wrong type *github.com/docker/cli/cli/config/configfile.ConfigFile
DONE 1115 tests, 2 skipped, 6 errors in 215.984s
make: *** [Makefile:22: test-coverage] Error 2
Exited with code 2
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d4877fb225)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 7ea48a16e3
Component: cli
... in preference to `chsh`, since in recent alpine 3.9.2 images that can fail
with:
Password: chsh: PAM: Authentication token manipulation error
Which seems to relate to the use of `!` as the password for `root` in `/etc/shadow`gq
Signed-off-by: Ian Campbell <ijc@docker.com>
(cherry picked from commit 5de2d9e8a9)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: b666e9a090
Component: cli
[18.09 backport] Fix TestBuildWithSession, TestBuildSquashParent using wrong daemon during test
Upstream-commit: c97602ef9903fd18e65b341a7359287e684cde84
Component: engine
These tests were spinning up a new daemon, but after the daemon was spun up,
the default test-daemon was used by the client.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9a3911ced83331b6efe698528a4480bd5ff3d7a6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 605bc1ffc5adc5a3968ebe7a58060d2542cc28f3
Component: engine
relevant changes:
- swarmkit#2826 [18.09 backport] use a custom grpc dialer when managers are joining (backport of swarmkit#2802)
- swarmkit#2801 [18.09 backport] Include old error-message for backward compatibility (backport of swarmkit#2797)
- swarmkit#2788 [18.09 backport] Return correct error-codes on conflicting names (backport of swarmkit#2779)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 1a60fdbdcefbecf762e063fbb5b3593e53e877bb
Component: engine
As reported in docker/for-linux/issues/484, since Docker 18.06
docker cp with a destination file name fails with the following error:
> archive/tar: cannot encode header: Format specifies USTAR; and USTAR cannot encode Name="a_very_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_long_filename_that_is_101_characters"
The problem is caused by changes in Go 1.10 archive/tar, which
mis-guesses the tar stream format as USTAR (rather than PAX),
which, in turn, leads to inability to specify file names
longer than 100 characters.
This tar stream is sent by TarWithOptions() (which, since we switched to
Go 1.10, explicitly sets format=PAX for every file, see FileInfoHeader(),
and before Go 1.10 it was PAX by default). Unfortunately, the receiving
side, RebaseArchiveEntries(), which calls tar.Next(), mistakenly guesses
header format as USTAR, which leads to the above error.
The fix is easy: set the format to PAX in RebaseArchiveEntries()
where we read the tar stream and change the file name.
A unit test is added to prevent future regressions.
NOTE this code is not used by dockerd, but rather but docker cli
(also possibly other clients), so this needs to be re-vendored
to cli in order to take effect.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit f55a4176febbd0dffd6e5eb65beb70bc32912d0b)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 989e7f5d3a3f40ebb936376245b770f766ea42e9
Component: engine
In applyTar, if the driver's ApplyDiff returns an error, the function
returns early without calling io.Copy.
As a consequence, the resources (a goroutine and some buffers holding
the uncompressed image, the digest, etc...) allocated or referenced by
NewInputTarStream above aren't released, as the worker goroutine only
finishes when it finds EOF or a closed pipe.
Signed-off-by: Sergio Lopez <slp@redhat.com>
(cherry picked from commit 5846db10af9fb37061ab92a07c3d82fbea92b2e0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: f660ef2c25590f21fdd10357c08a542a4876d6c3
Component: engine
This commit ensures that we test the correct branches of Docker
when making packaging changes.
Signed-off-by: Dave Tucker <dt@docker.com>
(cherry picked from commit 1ef9fb3f0b2b8016b50c6c71f2d14bea16faff35)
Upstream-commit: 5e59ff8a5e8ea44444aa4f22a8baf12e091bcc76
Component: packaging
GordonTheTurtle
Tibor Vass
John Howard
Sebastiaan van Stijn
Silvin Lubecki
Silvin Lubecki
Eric Curtin
coop-cloud
Ben Creasy
Michael Käufl
Ryan Wilson-Perkin
Sebastiaan van Stijn
Stefan Scherer
zhoulin xie
Frederic Hemberger
Anne Henmi
Nir Soffer
Filip Jareš
Andrew Hsu
Vincent Demeester
Ian Campbell
Kir Kolyshkin
Sergio Lopez
Eli Uriegas
Eli Uriegas
Dave Tucker
Dave Tucker